Cite Article

The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood

Choose citation format

BibTeX

@article{IJASEIT11742,
   author = {Rahmi Eka Putri and Anwar Kasim and - Emriadi and Alfi Asben},
   title = {The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood},
   journal = {International Journal on Advanced Science, Engineering and Information Technology},
   volume = {11},
   number = {2},
   year = {2021},
   pages = {814--819},
   keywords = {Cinnamon; pyrolysis; liquid smoke; GC-MS analysis},
   abstract = {Cinnamon wood has chemical and physical properties that can be optimized for use other than firewood. Lignocellulose compounds and a high density of raw materials would produce beneficial new compounds through pyrolysis. This research aims to make liquid smoke from cinnamon using pyrolysis and identify the concentration of the chemical compounds in liquid smoke and the rate of formation of the main compounds of liquid smoke. The Pyrolysis process was done twice, and the results were observed every 30 minutes. Chemical compounds of liquid smoke were analyzed using Gas Chromatography-Mass Spectroscopy (GC-MS). The crystal structure of charcoal produced from pyrolysis was analyzed using an X-ray diffractometer (XRD). The results showed that the liquid smoke, tar, charcoal, and the content lost after 150-minutes of pyrolysis was 28.94; 3.6; 42.92, and 24.54 %, respectively. Chromatography yielded ten peaks corresponding to compounds present in each stage of the process after 30 mins of pyrosis up to 150 mins. GC-MS analysis showed five chemical compounds, methanol, acetic acid, furfural, phenol, and guaiacol, as always present during the pyrolysis processes. Methanol, acetic acid, and phenol reached their highest concentration at the end of pyrolysis. The rate of formation of these compounds, particularly the methanol, continuously increased during the pyrolysis process. The length of the pyrolysis was proportional to the speed of methanol formation and the total yield.},
   issn = {2088-5334},
   publisher = {INSIGHT - Indonesian Society for Knowledge and Human Development},
   url = {http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=11742},
   doi = {10.18517/ijaseit.11.2.11742}
}

EndNote

%A Putri, Rahmi Eka
%A Kasim, Anwar
%A Emriadi, -
%A Asben, Alfi
%D 2021
%T The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood
%B 2021
%9 Cinnamon; pyrolysis; liquid smoke; GC-MS analysis
%! The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood
%K Cinnamon; pyrolysis; liquid smoke; GC-MS analysis
%X Cinnamon wood has chemical and physical properties that can be optimized for use other than firewood. Lignocellulose compounds and a high density of raw materials would produce beneficial new compounds through pyrolysis. This research aims to make liquid smoke from cinnamon using pyrolysis and identify the concentration of the chemical compounds in liquid smoke and the rate of formation of the main compounds of liquid smoke. The Pyrolysis process was done twice, and the results were observed every 30 minutes. Chemical compounds of liquid smoke were analyzed using Gas Chromatography-Mass Spectroscopy (GC-MS). The crystal structure of charcoal produced from pyrolysis was analyzed using an X-ray diffractometer (XRD). The results showed that the liquid smoke, tar, charcoal, and the content lost after 150-minutes of pyrolysis was 28.94; 3.6; 42.92, and 24.54 %, respectively. Chromatography yielded ten peaks corresponding to compounds present in each stage of the process after 30 mins of pyrosis up to 150 mins. GC-MS analysis showed five chemical compounds, methanol, acetic acid, furfural, phenol, and guaiacol, as always present during the pyrolysis processes. Methanol, acetic acid, and phenol reached their highest concentration at the end of pyrolysis. The rate of formation of these compounds, particularly the methanol, continuously increased during the pyrolysis process. The length of the pyrolysis was proportional to the speed of methanol formation and the total yield.
%U http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=11742
%R doi:10.18517/ijaseit.11.2.11742
%J International Journal on Advanced Science, Engineering and Information Technology
%V 11
%N 2
%@ 2088-5334

IEEE

Rahmi Eka Putri,Anwar Kasim,- Emriadi and Alfi Asben,"The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood," International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 2, pp. 814-819, 2021. [Online]. Available: http://dx.doi.org/10.18517/ijaseit.11.2.11742.

RefMan/ProCite (RIS)

TY  - JOUR
AU  - Putri, Rahmi Eka
AU  - Kasim, Anwar
AU  - Emriadi, -
AU  - Asben, Alfi
PY  - 2021
TI  - The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood
JF  - International Journal on Advanced Science, Engineering and Information Technology; Vol. 11 (2021) No. 2
Y2  - 2021
SP  - 814
EP  - 819
SN  - 2088-5334
PB  - INSIGHT - Indonesian Society for Knowledge and Human Development
KW  - Cinnamon; pyrolysis; liquid smoke; GC-MS analysis
N2  - Cinnamon wood has chemical and physical properties that can be optimized for use other than firewood. Lignocellulose compounds and a high density of raw materials would produce beneficial new compounds through pyrolysis. This research aims to make liquid smoke from cinnamon using pyrolysis and identify the concentration of the chemical compounds in liquid smoke and the rate of formation of the main compounds of liquid smoke. The Pyrolysis process was done twice, and the results were observed every 30 minutes. Chemical compounds of liquid smoke were analyzed using Gas Chromatography-Mass Spectroscopy (GC-MS). The crystal structure of charcoal produced from pyrolysis was analyzed using an X-ray diffractometer (XRD). The results showed that the liquid smoke, tar, charcoal, and the content lost after 150-minutes of pyrolysis was 28.94; 3.6; 42.92, and 24.54 %, respectively. Chromatography yielded ten peaks corresponding to compounds present in each stage of the process after 30 mins of pyrosis up to 150 mins. GC-MS analysis showed five chemical compounds, methanol, acetic acid, furfural, phenol, and guaiacol, as always present during the pyrolysis processes. Methanol, acetic acid, and phenol reached their highest concentration at the end of pyrolysis. The rate of formation of these compounds, particularly the methanol, continuously increased during the pyrolysis process. The length of the pyrolysis was proportional to the speed of methanol formation and the total yield.
UR  - http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=11742
DO  - 10.18517/ijaseit.11.2.11742

RefWorks

RT Journal Article
ID 11742
A1 Putri, Rahmi Eka
A1 Kasim, Anwar
A1 Emriadi, -
A1 Asben, Alfi
T1 The Rate of Formation of Main Compounds in the Pyrolysis of Cinnamon Wood
JF International Journal on Advanced Science, Engineering and Information Technology
VO 11
IS 2
YR 2021
SP 814
OP 819
SN 2088-5334
PB INSIGHT - Indonesian Society for Knowledge and Human Development
K1 Cinnamon; pyrolysis; liquid smoke; GC-MS analysis
AB Cinnamon wood has chemical and physical properties that can be optimized for use other than firewood. Lignocellulose compounds and a high density of raw materials would produce beneficial new compounds through pyrolysis. This research aims to make liquid smoke from cinnamon using pyrolysis and identify the concentration of the chemical compounds in liquid smoke and the rate of formation of the main compounds of liquid smoke. The Pyrolysis process was done twice, and the results were observed every 30 minutes. Chemical compounds of liquid smoke were analyzed using Gas Chromatography-Mass Spectroscopy (GC-MS). The crystal structure of charcoal produced from pyrolysis was analyzed using an X-ray diffractometer (XRD). The results showed that the liquid smoke, tar, charcoal, and the content lost after 150-minutes of pyrolysis was 28.94; 3.6; 42.92, and 24.54 %, respectively. Chromatography yielded ten peaks corresponding to compounds present in each stage of the process after 30 mins of pyrosis up to 150 mins. GC-MS analysis showed five chemical compounds, methanol, acetic acid, furfural, phenol, and guaiacol, as always present during the pyrolysis processes. Methanol, acetic acid, and phenol reached their highest concentration at the end of pyrolysis. The rate of formation of these compounds, particularly the methanol, continuously increased during the pyrolysis process. The length of the pyrolysis was proportional to the speed of methanol formation and the total yield.
LK http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=11742
DO  - 10.18517/ijaseit.11.2.11742