Ogive Nose Hard Missile Penetrating Concrete Slab Numerical Simulation Approach

Qadir Bux (1), Ismail Abdul Rahman (2), Ahmad Mujahid Ahmad Zaidi (3)
(1) Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia
(2) Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia
(3) Department of Mechanical, Faculty of Engineering, Universiti Pertahanan Nasional Malaysia
Fulltext View | Download
How to cite (IJASEIT) :
Bux, Qadir, et al. “Ogive Nose Hard Missile Penetrating Concrete Slab Numerical Simulation Approach”. International Journal on Advanced Science, Engineering and Information Technology, vol. 1, no. 6, Dec. 2011, pp. 586-91, doi:10.18517/ijaseit.1.6.118.
Great demand exists for more efficient design to protect delicate and serious structures such as nuclear plants, Power plants, Weapon Industries, weapons storage places, water retaining structures, & etc, against impact of kinetic missiles generated both accidentally and deliberately such as dynamic loading, incident occurs in nuclear plants, terrorist attack, Natural disasters like tsunami and etc., in various impact and blast scenarios for both civilian and military activities. In many cases, projectiles can be treated as rigid bodies when their damage and erosion are not severe. Due to the intricacy of the local impact damages, investigations are generally based on experimental data. Conclusions of the experimental observations are then used to guide engineering models. Local damages studies normally fall into three categories, i.e. empirical formulae based on data fitting, idealised analytical models based on physic laws and numerical simulations based on computational mechanics and material models. In the present study, 2D asymmetrical numerical simulation have done on concrete slab against the impact of  ogive nose hard missile of 26.90mm and 76.20mm diameter with CRH ratio 2.0 and 6.0 respectively, for penetration by using Concrete Damaged Plasticity Model, and ABAQUS/Explicit dynamic analysis in ABAQUS. It is found that the strains/stresses are induced in the concrete slab and a very nicely propagation of the stresses inside the  concrete slab in the form of waves, which is a clear indication for vibrations of the concrete. The lack of failure criterion in concrete damaged plasticity model does not allow the removal of elements during the analyses. This means that spalling, scabbing, and perforation cannot be modelled with the Concrete Damage Plasticity Model. The penetration depth results shows that the deeper penetration requires higher critical impact kinetic energies, and comparison shows the simulation results are more accurate than other formulae predicted results.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).