DOI : https://doi.org/10.18517/ijaseit.11.1.12666

Performance of a Solar Chimney for Cooling Building Façades under Different Heat Source Distributions in the Air Channel

Y Quoc Nguyen (1), Sa Nguyen-Tan (2), Hong-Tham T. Pham (3), Ai Manh-Thuy (4), Trieu Huynh-Nhat (5)
(1) Faculty of Engineering, Van Lang University, Ho Chi Minh City, Vietnam
(2) Faculty of Engineering, Van Lang University, Ho Chi Minh City, Vietnam
(3) Faculty of Civil Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh City, Vietnam
(4) Faculty of Engineering, Van Lang University, Ho Chi Minh City, Vietnam
(5) Faculty of Engineering, Van Lang University, Ho Chi Minh City, Vietnam
Fulltext View | Download
How to cite (IJASEIT) :
Nguyen, Y Quoc, et al. “Performance of a Solar Chimney for Cooling Building Façades under Different Heat Source Distributions in the Air Channel”. International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 1, Feb. 2021, pp. 158-64, doi:10.18517/ijaseit.11.1.12666.
Citation Format :
Solar chimneys can be employed in buildings for natural ventilation, cooling, or heating of the building envelope, hence saving energy. In open double-skin facades, the air channel's thermal effects between the two layers of a faí§ade are similar to those in a solar chimney. Most studies about solar chimney in the literature have been focusing on heating one air channel wall. In this study, the performance of a solar chimney under different distributions of the heat source on both walls of the air channel was studied numerically by the Computational Fluid Dynamics method. Induced flow rate, temperature rise, and thermal efficiency of the chimney were investigated. Chimneys with practical dimensions with the height ranging from 0.5 m to 1.5 m and the gap-to-height ratio ranging from 0.025 to 0.15 were examined. The results showed that together with the chimney's dimensions, location, and distribution of the heat source on the channel's walls strongly affect the performance of the chimney. While heating the whole left wall induced more flowrate than heating the whole right wall, heating part of the left and the right walls resulted in peak performance at specific portions of the right wall heated from the bottom or the top of the channel. The peak values of the investigated parameters and the specific portions of the heated wall to achieve those peaks also changed with the channel's gap-to-height ratio.

F. Pomponi, P. A. E. Piroozfar, R. Southall, P. Ashton, and R. P. Farr Eric, “Energy performance of DoubleSkin Faí§ades in temperate climates: A systematic review and metaanalysis”, Renewable and Sustainable Energy Reviews, vol. 54, pp. 1525-1536, 2016.

A. Al Touma and D. Ouahrani, “Performance assessment of evaporatively-cooled window driven by solar chimney in hot and humid climates”, Solar Energy, vol. 169, pp. 187-195, 2018.

A. M. Qahtan, “Thermal performance of a double-skin faí§ade exposed to direct solar radiation in the tropical climate of Malaysia: A case study”, Case Studies in Thermal Engineering, vol. 14, pp. 100419, 2019

G. Gan, “Simulation of buoyancyinduced flow in open cavities for natural ventilation”, Energy and Buildings, vol. 38(5), pp. 410-420, 2006.

N. K. Bansal, R. Mathur, and M. S. Bhandari, “Solar chimney for enhanced stack ventilation”, Building and Environment, vol. 28(3), pp. 373-377, 1993.

O. Saadatian, C. H. Lim, K. Sopian, and E. Salleh, “A state of the art review of solar walls: Concepts and applications”, Journal of Building Physics, vol. 37, pp. 55-79, 2013.

L. Shi, G. Zhang, W. Yang, D. Huang, X. Cheng, and S. Setunge, “Determining the influencing factors on the performance of solar chimney in buildings”, Renewable and Sustainable Energy Reviews, vol. 88, pp. 223-238, 2018.

J. Mathur, S. Mathur, and Anupma, “Summer-performance of inclined roof solar chimney for natural ventilation”, Energy and Buildings, vol. 38(10), pp. 1156-1163, 2006.

K. S. Ong, “A mathematical model of a solar chimney”, Renewable Energy, vol. 28, pp. 1047 - 1060, 2003.

E. M. A. Mokheimer, M. R. Shakeel, and J. Al-Sadah, “A novel design of solar chimney for cooling load reduction and other applications in buildings”, Energy and Buildings, vol. 153, pp. 219-230, 2017.

N. Dimassi and L. Dehmani, “Performance comparison between an improved and a classical Trombe wall: An experimental study”, Journal of Building Physics, vol. 40, pp. 372-395, 2017.

I. Zavala-Guillí©n, J. Xamí¡n, I. Herní¡ndez-Pí©rez, I. Herní¡ndez-Lopí©z, M. Gijón-Rivera, and Y. Chí¡vez, “Numerical study of the optimum width of 2a diurnal double air-channel solar chimney”, Energy, vol. 147, pp. 403-417, 2018.

A. C. Briga Sí¡, A. Martins, J. Boaventura-Cunha, J. Carlos Lanzinha, and A. Paiva, “An analytical approach to assess the influence of the massive wall material, thickness and ventilation system on the Trombe wall thermal performance”, Journal of Building Physics , vol. 41, pp. 445-468, 2018.

H. H. Al-Kayiem, K. V. Sreejaya, and A. O. Chikere, “Experimental and numerical analysis of the influence of inlet configuration on the performance of a roof top solar chimney”, Energy and Buildings, vol. 159, pp. 89-98, 2018.

H. Wang and C. Lei, “Theoretical modeling of combined solar chimney and water wall for buildings”, Energy and Buildings, vol. 187, pp. 186-200, 2019.

Y. Q. Nguyen and J. C. Wells, “A numerical study on induced flowrate and thermal efficiency of a solar chimney with horizontal absorber surface for ventilation of buildings”, Journal of Building Engineering, vol. 28, pp. 101050, 2020.

Y. Q. Nguyen and J. C. Wells, “Effects of wall proximity on the airflow in a vertical solar chimney for natural ventilation of dwellings”, Journal of Building Physics, vol. 44(3), pp. 1-26, 2020.

G. Gan, “Impact of computational domain on the prediction of buoyancydriven ventilation cooling”, Building and Environment, vol. 45(5), pp. 1173-1183, 2010.

J. H. Ferziger and M. Peric, Computational methods for fluid dynamics, New York: SpringerVerlag Berlin Heidelberg, 2002.

B. Zamora and A. S. Kaiser, “Thermal and dynamic optimization of the convective flow in Trombe Wall shaped channels by numerical investigation”, Applied Thermal Engineering, vol. 29(4), pp. 762-769, 2009.

R. Bassiouny and N. S. A. Koura, “An analytical and numerical study of solar chimney use for room natural ventilation”, Energy and Buildings, vol. 40(5), pp. 865-873, 2008.

V. Yakhot and S. A. Orszag, “Renormalization group analysis of turbulence. I. Basic theory”, Journal of Scientific Computing, vol. 1(1), pp. 3-51, 1986.

T. Yilmaz and S. M. Fraser, “Turbulent natural convection in a vertical parallelplate channel with asymmetric heating”, International Journal of Heat and Mass Transfer, vol. 50(13-14), pp. 2612-2623, 2007.

Fluent Inc., FLUENT user’s guide, New Hampshire, USA, 2005.

S. A. M. Burek and A. Habeb, “Air flow and thermal efficiency characteristics in solar chimneys and Trombe Walls”, Energy and Buildings, vol. 39(2), pp. 128-135, 2007.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).