An Approach to Optimize the Corrugated Metal Gasket Design Using Taguchi Method
How to cite (IJASEIT) :
“Asbestos is hard to replace as Japan heads for ban Diesel vehicle break- downs linked to sulfur,” Seal. Technol., no. January, p. 4789, 2006, doi: https://doi.org/10.1016/S1350-4789(06)70920-5.
“The development of a substitute for asbestos gasket material,” Seal. Technol., no. 6, pp. 9-10, 2007, doi: 10.1016/s1350-4789(07)70280-5.
H. A. Saeed, S. Izumi, S. Sakai, S. Haruyama, M. Nagawa, and H. Noda, “Development of New Metallic Gasket and its Optimum Design for Leakage Performance,” J. Solid Mech. Mater. Eng., 2008, doi: 10.1299/jmmp.2.105.
M. A. Choiron, Y. Kurata, S. Haruyama, and K. Kaminishi, “Simulation and experimentation on the contact width of new metal gasket for asbestos substitution,” World Acad. Sci. Eng. Technol., 2010.
M. A. Choiron, S. Haruyama, and K. Kaminishi, “Optimization of new metal gasket design based on contact width involving contact stress consideration,” Appl. Mech. Mater., vol. 110-116, no. 3, pp. 4780-4787, 2012, doi: 10.4028/www.scientific.net/AMM.110-116.4780.
D. Nurhadiyanto, M. A. Choiron, K. Kaminishi, and S. Haruyama, “Optimization of New 25A-size Metal Gasket Design Based on Contact Width Considering Forming and Contact Stress Effect,” Int. J. Mech. Mechatronics Eng., vol. 6, no. 3, pp. 671-675, 2012.
S. Haruyama, D. Nurhadiyanto, M. A. Choiron, and K. Kaminishi, “Influence of surface roughness on leakage of new metal gasket,” Int. J. Press. Vessel. Pip., 2013, doi: 10.1016/j.ijpvp.2013.06.004.
D. Nurhadiyanto, S. Haruyama, K. Kaminishi, I. M. Gatot Karohika, and D. Mujiyono, “Contact Stress and Contact Width Analysis of Corrugated Metal Gasket,” Appl. Mech. Mater., vol. 799-800, pp. 765-769, 2015, doi: 10.4028/www.scientific.net/AMM.799-800.765.
I. M. G. K. Shigeyuki Haruyama, Didik Nurhadiyanto, Ken Kaminishi, Akinori Sato, “Development of 25A-Size Three-Layer Metal Gasket by Using FEM Simulation,” Int. J. Mech. Mechatronics Eng., vol. 10, no. 3, pp. 577-583, 2016, doi: doi.org/10.5281/zenodo.1339189.
I. M. G. K. Oke Oktavianty, Shigeyuki Haruyama, Didik Nurhadiyanto, Ken Kaminishi, “Analysis of Contact Width and Contact Stress of Three-Layer Corrugated Metal Gasket,” Int. J. Mech. Mechatronics Eng., vol. 11, no. 4, pp. 870-879, 2017, doi: doi.org/10.5281/zenodo.1131511.
S. Haruyama, M. A. Choiron, and D. Nurhadiyanto, “Optimum Design of Laminated Corrugated Metal Gasket Using Computer Simulation,” Int. J. Integr. Eng., vol. 5, pp. 29-34, 2019, doi: https://doi.org/10.30880/ijie.2019.11.05.004.
I. M. G. Karohika, I. N. G. Antara, and I. M. D. Budiana, “Influence of dies type for gasket forming shape,” 2019, doi: 10.1088/1757-899X/539/1/012019.
I. M. G. Karohika and I. N. G. Antara, “Gasket Process Parameter in Metal Forming,” 2019, doi: 10.1088/1755-1315/248/1/012044.
I. M. G. Karohika and I. N. G. Antara, “The metal gasket sealing performance of bolted flanged with fem analysis,” 2019, doi: 10.1088/1757-899X/539/1/012018.
I. N. Budiarsa, I. N. G. Antara, and I. M. G. Karohika, “Indentation Size Effect of the Vickers Indentation to Improve the Accuracy of Inverse Materials Properties Modelling Based on Hardness Value,” 2019, doi: 10.1088/1755-1315/248/1/012009.
I. N. Budiarsa, I. M. Astika, I. N. G. Antara, and I. M. G. Karohika, “Optimization on strength spot welding joint trough finite element modelling indentation approach,” IOP Conf. Ser. Mater. Sci. Eng., vol. 539, no. 1, 2019, doi: 10.1088/1757-899X/539/1/012042.
I. N. Budiarsa, I. N. G. Antara, I. M. G. Karohika, I. W. Widhiada, and N. L. Watiniasih, “Identification Plastic Properties of Spot-Welded Joints Using the Instrumented Indentation Technique,” IOP Conf. Ser. Mater. Sci. Eng., vol. 811, no. 1, pp. 0-5, 2020, doi: 10.1088/1757-899X/811/1/012020.
W. Widhiada, I. N. G. Antara, I. N. Budiarsa, and I. M. G. Karohika, “The Robust PID Control System of Temperature Stability and Humidity on Infant Incubator Based on Arduino at Mega 2560,” 2019, doi: 10.1088/1755-1315/248/1/012046.
W. Widhiada, N. S. Kumara, and T. G. T. Nindhia, “Analysis of control force grasping for a multifunctional five fingered robot to pick-up various of components,” MATEC Web Conf., vol. 59, pp. 0-4, 2016, doi: 10.1051/matecconf/20165905004.
D. Nurhadiyanto, Mujiyono, Sutopo, and F. Amri Ristadi, “Simulation Analysis of 25A-Size Corrugated Metal Gasket Coated Copper to Increase Its Performance,” IOP Conf. Ser. Mater. Sci. Eng., vol. 307, p. 012005, 2018, doi: 10.1088/1757-899X/307/1/012005.
D. Nurhadiyanto, S. Haruyama, Mujiyono, and Sutopo, “An analysis of changes in flange surface roughness after being used to tighten a corrugated metal gasket,” IOP Conf. Ser. Mater. Sci. Eng., vol. 535, no. 1, 2019, doi: 10.1088/1757-899X/535/1/012015.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).