The Reduction of TDS, COD, and Oil-and-Fats in Produced Water by Pre-Treatment Process Using Electrocoagulants in the Oil and Gas Industry of South Sumatra, Indonesia

- Surahman (1), Muhammad Said (2), David Bahrin (3)
(1) Magister Program, Chemical Engineering Department, Faculty of Engineering, Sriwijaya University, Palembang, 30128, Indonesia
(2) Chemical Engineering Department, Faculty of Engineering, Sriwijaya University, Palembang, 30128, Indonesia
(3) Chemical Engineering Department, Faculty of Engineering, Sriwijaya University, Palembang, 30128, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Surahman, -, et al. “The Reduction of TDS, COD, and Oil-and-Fats in Produced Water by Pre-Treatment Process Using Electrocoagulants in the Oil and Gas Industry of South Sumatra, Indonesia”. International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 6, Dec. 2021, pp. 2261-70, doi:10.18517/ijaseit.11.6.13043.
Produced water is one of the largest wastes generated by the oil and gas industry. Produced water is waste with a mixture of several organic and inorganic compounds. The increasing volume of wastewater produced in several countries this decade impacts the environment, creating its problems. Some of the produced water is treated conventionally and modernly, including physical, chemical, and biological treatment. This study uses the electrocoagulation method in treating produced water in the Talang Jimar structure of the oil and gas industry in South Sumatra, Indonesia. This study aims to determine the factors of surface area, voltage, and time of electrocoagulation in reducing COD, TDS, and oil-and-fats levels in produced water under the quality standards required by the government. The results of this study indicate the electrocoagulation process in producing the obtained water. The efficiency of electrode reduction with a surface area of 38.4 mm2 is the best COD reduction occurs at a voltage of 9 conditions of 90 minutes, reaching 88.07%. The best decrease in TDS at a voltage of 9 conditions of 90 minutes reached 31.29%. The best reduction in oil and fat occurred at a voltage of 12 of 30 minutes, reaching 96.98%. Meanwhile, the reduced efficiency of the electrode decreased with a surface area of 78 mm2; the best COD reduction occurred at a voltage of 9 conditions of 90 minutes, reaching 92.95%. The best decrease in TDS occurred at a voltage of 9 conditions of 90 minutes, reaching 36.25%. The best reduction in oil and fats occurred at voltage 12 for 90 minutes or 98.56%.

Zongo, Inoussa. 2009. í‰tude expí©rimentale et thí©orique du procí©dí© d'í©lectrocoagulation, application du traitement de deux effluents textiles et d'un effluent simulí© de tannerie, Institut National Polytechnique de Lorraine, (PhD thesis report).

Lacasa, E., P. Canizares, C. Saez, F. Martinez, and M. A Rodrigo. 2013. Modelling and cost evaluation of electrocoagulation processes for the removal of anions from water, Separation and Purification Technology. 107, pp. 219-227.

H. Mariam, Ahmad D., Ignasi S., Nihal O., and Mehmet A. Oturan. 2013. Electrochemical degradation of the antibiotic sulfachloropyridazine by hydroxyl radicals generated at a BDD anode, Chemosphere 91, pp. 1304-1309.

Tweney, R. D., and David Gooding. 1822. Michael Faraday’s ‘Chemical Notes, Hints, Suggestions and Objects of Pursuit’ of 1822. Series 17. England.

Moussa, D. T., Muftah H El-Naas, M. Nasser, and M. J. Al-Marri. 2016. A Comprehensive Review of electrocoagulation for water treatment : Potentials and Challenges. Science Direct, pp. 323-330.

Gatsios, Evangelos, J.N. Hahladakis, and E. Gidarakos. 2015. Optimization of electrocoagulation (EC) process for the puriï¬cation of a real industrial wastewater from toxic metals. J. Environ Manage, 154, pp. 117-127.

Fan, Li, Yanwei Zhou, Weishen Yang, Guohua Chen and Fenglin Yang. 2008. Electrochemical degradation of aqueous solution of Amaranth azo dye on ACF under potentiostatic model, Dyes Pigments 76, pp. 440-446.

Martí­nez-Villafañe, J.F., C. Montero-Ocampo, and A.M. Garcí­a-Lara. 2009. Energy and electrode consumption analysis of electrocoagulation for the removal of arsenic from underground water, J. Hazard. Mater, 172, pp. 1617-1622.

Ferro, B. Dal, and M. Smith. 2007. Global Onshore and Offshore Water Production, http://www.touchoilandgas.com/global-onshore-offshore-water-a7137- 1.html.

Mansouri, K., K. Ibrik, N. Bensalah, and A. Abdel-Wahab. 2011. Anodic dissolution of pure alu-minum during electrocoagulation process: influence of supporting electrolyte, initial pH, and current density, Ind. Eng. Chem. Res. 50, pp. 13362-13372.

Holt, P. K., G. W. Barton, M. Wark, and C. A. Mitchell. 2002. A quantitative comparison between chemical dosing and electrocoagulation, Colloids Surf. A Physicochem. Eng. Asp. 211, pp. 233-248.

Duan, J., and John Gregory. 2003. Coagulation by hydrolyzing metal salts, Adv. Colloid Interf. Sci. 100-102, pp. 475-502.

Sari, M. A., and Shankararaman Chellam. 2015. Mechanisms of boron removal from hydraulic fracturing wastewater by aluminum electrocoagulation, Journal Of Colloid And Interface Science. Elsevier Inc., 458, pp. 103-111.

Chou, Wei-Lung, Chih-Ta W., Wen-Chun C., and Shih-Yu C. 2010. Adsorption treatment of oxide chemical mechanical polishing wastewater from a semiconductor manufacturing plant by electrocoagulation. Journal of Hazardous Materials. Elsevier B.V., 180(1-3), pp. 217-224.

Panizza, M., and G. Cerisola. 2007. Electrocatalytic materials for the electrochemical oxidation of synthetic dyes, Appl. Catal. B 7, pp. 95-101.

Nur, Ansiha, and Agus Jatnika. 2017. Elektrokoagulasi Monopolar untuk Menyisihkan Organik dan Minyak Lemak Air Buangan Domestik. 14, pp 81-86.

Ling-bo, Li, Yan Song, Zeng Xiang-dong, and Lin Da-quan. 2002. Analysis of organic compounds in oilï¬eld produced water, Petrochem. Technol. 3, pp. 472-475.

Harif, Tali, M. Khai, and A. Adin. 2012. Electrocoagulation versus chemical coagulation: coagulation/ flocculation mechanisms and resulting floc characteristics, Water Res. 46, pp. 3177-3188.

R. B., Hansen, and Davies, S. R. H. 1994. Review of potential technologies for the removal of dissolved components from produced water, Chem. Eng. Res. Des. 72, pp. 176-188.

Mahmad, M. Khairul Nizam, M.A.Z. Mohd Remy Rozainy, Ismail Abustan, and Norlia Baharun. 2016. Electrocoagulation Process by Using Aluminum and Stainless Steel Electrodes to Treat Total Chromium, Colour and Turbidity. Science Direct, pp. 341-351.

Kamaraj, R., and Subramanyan Vasudevan. 2014. Evaluation of electrocoagulation process for the removal of strontium and cesium from aqueous solution, Chemical Engineering Research and Design. Institution of Chemical Engineers, pp. 1-9.

Isa, M. Hasnain, Ezechi E.H., Ahmed Z., Magram S.F., Kutty S.R. 2013. Boron removal by electrocoagulation and recovery, Water Research. Elsevier, 51 (0), pp. 113-123.

Adhoum, N., Lotfi M., Nizar B., and Jamel-Eddine B. 2004. Treatment of electroplating wastewater containing Cu2 +, Zn2 + and Cr (VI) by electrocoagulation, J. Hazard. Mater, pp. 207-213.

Ding, Jing, et al. 2018. Tertiary treatment of landfill leachate by an integrated ElectroOxidation/ElectroCoagulation/Electro-Reduction process: Performance and mechanism.

Cora-Hernandez, M. G. R. 2002. Electrocoagulation/Flotation (ECF) Technology Used in the Treatment of Wastewater Containing Variable Concentrations of Heavy Metals and Organic Pollutants. UMI, Cleveland.

Harif, Tali, and A. Adin. 2007. Characteristics of aggregates formed by electroflocculation of a colloidal suspension, Water Res. 41, pp. 2951-2961.

Biesinger, K. E., and Glenn M. Christensen. 1972. Effects of Various Metals on Survival, Growth, Reproduction, and Metabolism of Dophnia magna, J. Fish. Res. Board Can. 29: 1691.

Igunnu, E. 2016. Produced water treatment technologies.http://ijlct.oxfordjournals.org/content/early/2012/07/04/ijlct.cts049.full.

J. D. Arthur, B.G. Langhus, and C. Patel. 2005. Technical Summary of Oil and Gas Produced Water Treatment Technologies,http://www.rrc.state.tx.us/commissioners/williams/environment/produced water trtmnt Tech.pdf.

Robinson, D. 2013. Treatment and discharge of produced waters onshore, Filtration & Separation, pp. 40-46.

Gadd A.S., Ryan D.R., Kavanagh J.M., Barton G.W. Design development of an electrocoagulation reactor for molasses process wastewater treatment. Water Sci. Technol. 2010;61:3221-3227. doi:10.2166/wst.2010.086.

Sridhar, R., V. Sivakumar, V. Prince Immanuel, and J. Prakash Maran. 2011. Treatment of pulp and paper industry bleaching effluent by electrocoagulant process, Journal of Hazardous Materials. Elsevier B.V., 186(2-3), pp. 1495-1502.

T. I. R. Utvik. 2003. Composition, Characteristics of produced water in the North Sea, in: Produced Water Workshop, Aberdeen, Scotland, 26-27 March.

T. I. R. Utvik. 1999. Chemical characterization of produced water from four offshore oil production platforms in the North Sea, Chemosphere 39, pp. 2593-2606.

Muller, K. 1992. Electroflotation from the double layer to troubled waters. In: Murphy O.J., Srinivasan S., Conway B.E., eds. Electrochemistry in Transition—From 20th to 21st Century. 1992;702. doi:10.1002/anie.201306828.

Gamage, N. P., J. D. Rimer, and S. Chellam. 2012. Improvements in permeate flux by aluminum electroflotation pretreatment during microfiltration of surface water, Journal of Membrane Science. Elsevier B.V., 411-412, pp. 45-53.

Can, O.T., M. Bayramoglu, and M. Kobya. 2003. Decolorization of reactive dye solutions by electrocoagulation using aluminum electrodes, Ind. Eng. Chem. Res. 42, pp. 3391-3396.

Sutanto, S., Danang Wijayanto, and Hijan Ag. 2010. Pengaruh Perubahan Arus Listrik Terhadap Penurunan Kadar Lemak dan Minyak dalam Ir Limbah Melalui Proses Elektrokoagulasi. Politeknologi. 9.

Mollah, M.Y.A., P. Morkovsky, J.A.G. Gomes, M. Kesmez, J. Parga, and D.L. Cocke. 2004. Fundamentals, present and future perspectives of electrocoagulation, J. Hazard. Mater. B114, pp. 199-210

Santos, S., Osvaldo Chiavone-Filho, Eduardo L. de Barros Neto, and E. L. Foletto. 2014. Oil removal from produced water by conjugation of fl otation and photo-Fenton processes, Journal of Environmental Management. Elsevier Ltd, pp. 3-9.

Bard, A.J., and Larry R. Faulkner. 2000. Electrochemical Methods Fundamentals and Applications. Edisi 2, Jhon Wiley & Sons, New York.

Kumar, P.R., Sanjeev Chaudhari, Kartic C. Khilar, and S.P. Mahajan. 2004. Removal of arsenic from wastewater by electrocoagulation. Chemosphere, 55, pp. 1245-1252.

Koparal, A.S., and íœ.B. í–gí¼tveren. 2002. Removal of nitrate from water by electroreduction and electrocoagulation. J. Hazard. Mater. B89, pp. 83-94.

Panizza, M., and G. Cerisola. 2008. Removal of colour and COD from wastewater containing acid blue 22 by electrochemical oxidation, J. Hazard. Mater. 153, pp. 83-88.

Chen, X., Guohua Chen, and Po Lock Yue. 2002. Novel electrode system for electroflotation of wastewater. Environ. Sci. Technol. 2002;36:778-783. doi:10.1021/es011003u

Nagai, N., M. Takeuchi, Teruo Kimura, and T. Oka. 2003. Existence of optimum space between electrodes on hydrogen production by water electrolysis. Int. J. Hydrog. Energy. 2003;28:35-41. doi:10.1016/S0360-3199(02)00027-7.

Akyol, A., Orhan Taner Can, and Mahmut B. 2015. Journal of Water Process Engineering Treatment of hydroquinone by photochemical oxidation and electrocoagulation combined process, Journal of Water Process Engineering. Elsevier Ltd, 8, pp. 45-54.

Hu, C.Y., S.L. Loa, and W.H. Kuan. 2003. Effects of co-existing anions on fluoride removal in electrocoagulation (EC) process using aluminum electrodes, Water Res. 37, pp. 4513-4523.

Mano, N. 2019. Recent advances in high surface area electrodes for Q8 bioelectrochemical applications. Elsevier, pp. 1-6.

Alam, R., and Shang J.Q. Electrochemical model of electro-flotation. J. Water Process Eng. 2016;12:78-88. doi:10.1016/j.jwpe.2016.06.009

Gunstone, Frank D. 2004. The Chemistry of Oils and Fats. Blackwell, Oxford.

Grjotheim, K., Krohn C., Malinovsky, M., Matiasovsky, K. and Thonstad J. 1982. Aluminum Electrolysis Fundamentals of the Hall-Heroult. 2nd Edition. Germany.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).