[RETRACTED] An Investigation of the Optimization of Technological Parameters When Machining Straight Toothed Bevel Gears on 3-Axis CNC Milling Machine
How to cite (IJASEIT) :
M. D. Eastwood and K. R. Haapala, “A unit process model based methodology to assist product sustainability assessment during design for manufacturing,” J. Clean. Prod., 2015, doi: 10.1016/j.jclepro.2015.08.105.
H. Ding, J. Tang, J. Zhong, G. Wan, and Z. Zhou, “Simulation and optimization of computer numerical control-milling model for machining a spiral bevel gear with new tooth flank,” Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2016, doi: 10.1177/0954405416640171.
J. Teixeira Alves, J. P. de Vaujany, and M. Guingand, “Comparison of Simulations and Experiments of Loaded Spiral Bevel Gears Behavior,” 2015, doi: 10.1115/detc2015-47421.
C. í–zel and Y. Ortaí§, “A study on the cutting errors of the tooth profiles of the cycloidal gears manufactured in CNC milling machine,” Int. J. Mater. Prod. Technol., 2016, doi: 10.1504/IJMPT.2016.076373.
M. Q. Chau, “Modeling 3D surface milling process using a ball-end milling cutter,” J. Mech. Eng. Res. Dev., 2020.
R. García-García and M. A. Gonzí¡lez-Palacios, “Method for the geometric modeling and rapid prototyping of involute bevel gears,” Int. J. Adv. Manuf. Technol., 2018, doi: 10.1007/s00170-018-2246-9.
M. Kostrzewski and R. Melnik, “Numerical Dynamics Study of a Rail Vehicle with Differential Gears,” 2017, doi: 10.1016/j.proeng.2017.06.076.
M. Q. Chau, “An overview study on the laser technology and applications in the mechanical and machine manufacturing industry,” J. Mech. Eng. Res. Dev., 2019, doi: 10.26480/jmerd.05.2019.16.20.
P. Bo, H. Gonzí¡lez, A. Calleja, L. N. L. de Lacalle, and M. Bartoň, “5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools — Part I: Modeling and simulation,” Precis. Eng., 2020, doi: 10.1016/j.precisioneng.2019.11.015.
S. Peng, H. Ding, and J. Tang, “Corrected Calculation of Machine Settings for Spiral Bevel and Gears Using an Improved 6σ Method,” Hsi-An Chiao Tung Ta Hsueh/Journal Xi’an Jiaotong Univ., 2019, doi: 10.7652/xjtuxb201906006.
K. Kawasaki and K. Shinma, “Accuracy measurement and evaluation of straight bevel gear manufactured by end mill using CNC milling machine,” J. Mech. Des. Trans. ASME, 2009, doi: 10.1115/1.2988480.
C. Gosselin and J. Wang, “5 Axis CNC Manufacturing of EDM Bevel Gear Electrodes,” Proc. JSME Int. Conf. motion power Transm., 2017, doi: 10.1299/jsmeimpt.2017.02-05.
C. Gosselin, “Multi axis CnC manufacturing of straight and spiral bevel gears,” in Mechanisms and Machine Science, 2018.
M. Q. Chau and D. T. Nguyen, “A study on factors affecting the welding flux in the case of wire welding,” Test Eng. Manag., 2020.
V. Vullo, “Straight Bevel Gears,” 2020.
Y. Zhou, Z. C. Chen, and J. Tang, “A New Method of Designing the Tooth Surfaces of Spiral Bevel Gears with Ruled Surface for Their Accurate Five-Axis Flank Milling,” J. Manuf. Sci. Eng. Trans. ASME, 2017, doi: 10.1115/1.4035079.
H. A. Zschippang, S. Weikert, K. A. Kí¼í§í¼k, and K. Wegener, “Face-gear drive: Geometry generation and tooth contact analysis,” Mech. Mach. Theory, 2019, doi: 10.1016/j.mechmachtheory.2019.103576.
A. Acinapura, G. Fragomeni, P. F. Greco, D. Mundo, G. Carbone, and G. Danieli, “Design and prototyping of miniaturized straight bevel gears for biomedical applications,” Machines, 2019, doi: 10.3390/machines7020038.
D. He, H. Ding, and J. Tang, “A new analytical identification approach to the tooth contact points considering misalignments for spiral bevel or hypoid gears,” Mech. Mach. Theory, 2018, doi: 10.1016/j.mechmachtheory.2017.12.003.
J. R. Davis, Gear Materials , Properties , and Manufacture. 2005.
D. N. Nguyen, A. T. Hoang, X. D. Pham, M. T. Sai, M. Q. Chau, and V. V. Pham, “Effect of sn component on properties and microstructure CU-NI-SN alloys,” J. Teknol., 2018, doi: 10.11113/jt.v80.11867.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).