DOI : https://doi.org/10.18517/ijaseit.10.6.13782

Finite Element Numeric Simulation of Organic Solar Cells with Gold Thin Film

Grazia Lo Sciuto (1), Salvatore Coco (2), Dor Gotleyb (3), Rafi Shikler (4)
(1) Department of Electrical, Electronics and Informatics Engineering, University of Catania, Viale Andrea Doria 6, Catania, 95125, Italy
(2) Department of Electrical, Electronics and Informatics Engineering, University of Catania, Viale Andrea Doria 6, Catania, 95125, Italy
(3) Department of Electrical and Computer Engineering, Ben-Gurion University of the Negev, P. O. B. 653 Beer-Sheva, Israel
(4) Department of Electrical and Computer Engineering, Ben-Gurion University of the Negev, P. O. B. 653 Beer-Sheva, Israel
Fulltext View | Download
How to cite (IJASEIT) :
Lo Sciuto, Grazia, et al. “Finite Element Numeric Simulation of Organic Solar Cells With Gold Thin Film”. International Journal on Advanced Science, Engineering and Information Technology, vol. 10, no. 6, Dec. 2020, pp. 2478-83, doi:10.18517/ijaseit.10.6.13782.
Citation Format :
In this paper, we have explored the potential of organic solar cells with gold layers, simulating different geometries and comparing them with the experimental data obtained from the devices produced at the “optoelectronic organic devices laboratory at Ben Gurion University of the Negev, Israel.” Thin-film heterojunction solar devices are analyzed using a basic chemical technology of GLASS/ITO/PEDOT,PSS/P3HT, PCBM, and another type of nanostructure where the gold layer is added. A standard device is realized on top of a transparent substrate such as glass or flexible polymer Polyethylene Terephthalate (PET). The first layer is the anode, which is made of conductive material and is also transparent. In our case, the very common material Indium-Tin-Oxide (ITO) is used. To facilitate the transition between the active layer and the anode, an intermediate layer is introduced. Hole Transport Layer (HTL) 's high hole mobility allows holes to move towards the anode instead of the cathode. On top of these layers the organic active layer is constituted by a blend of two organic materials configuring a multiple junction morphology (Bulk Heterojunction or BHJ). In our case, two commonly organic materials [6,6]-Phenyl C61 Butyric acid Methyl ester and Poly(3-Hexylthiophene-2,5-diyl) (PCBM:P3HT) are used. The cathode on top organic active layer is made of highly conductive opaque metal, mostly Aluminum (Al). The finite-element method has been used to compute the electromagnetic field distributions. The results show that the model with the gold layer increases the electrical performance of organic solar cells.

L., Safriani, et al. "Charge carrier dynamics of active material solar cell P3HT: ZnO nanoparticles studied by muon spin relaxation (μSR)." Advanced Materials Research. Vol. 896, pp. 477-480, Trans Tech Publications Ltd, 2014.

M., Sauki, et al. "The structural and electrical properties of nanostructures ZnO thin films on flexible substrate." International Journal on Advanced Science, Engineering and Information Technology . Vol. 7, n. 3, pp. 822-828, (2017).

W. O. S., Arsyad, et al. "Revealing the limiting factors that are responsible for the working performance of quasi-solid state DSSCs using an ionic liquid and organosiloxane-based polymer gel electrolyte." Ionics, Vol. 24, n.3, pp. 901-914, (2018).

H. B., Nguyen, and T. A., Bui, “Developing The Solar Tracking System for Trough Solar Concentrator.” International Journal on Advanced Science, Engineering and Information Technology, Vol. 6, n. 1, pp. 58-60, (2016).

A., Pangdam, et al. "Investigation of gold quantum dot enhanced organic thin film solar cells." Particle & Particle Systems Characterization, Vol. 34, n. 11, pp. 1700133, (2017).

G., Lo Sciuto, G., Capizzi, S., Coco, R. , Shikler, “Geometric shape optimization of organic solar cells for efficiency enhancement by neural networks” Lecture Notes in Mechanical Engineering, pp. 789-796, (2017), DOI: 10.1007/978-3-319-45781-9_79.

G., Capizzi, G., Lo Sciuto, C., Napoli, R., Shikler, M., Wozniak, ” Optimizing the organic solar cell manufacturing process by means of AFM measurements and neural networks”, Energies, Vol. 11, n. 5, art. no. 1221, (2018), DOI: 10.3390/en11051221.

G., Lo Sciuto, “Application of artificial intelligence for optimizing an organic solar cells production process”, Photonics Letters of Poland, Vol.12, n.2, pp. 34-36,(2020), DOI: 10.4302/plp.v12i2.993.

G., Lo Sciuto, S., Coco, “A 3D finite element model of degradation phenomena in organic solar devices affected by oxidation”, International Journal of Energy and Environmental Engineering, Vol.11, n.4, pp. 431-437, (2020), DOI: 10.1007/s40095-020-00345-1.

G., Lo Sciuto, C., Napoli, G., Capizzi, R., Shikler, “Organic solar cells defects detection by means of an elliptical basis neural network and a new feature extraction technique” Optik, Vol. 194, art. no. 163038, (2019), DOI: 10.1016/j.ijleo.2019.163038.

D., Subara and , I. Jaswir, “Gold Nanoparticles: Synthesis and application for Halal Authentication in Meat and Meat Products.” International Journal on Advanced Science, Engineering and Information Technology, Vol. 8, n. 4-2, pp. 1633-1641, (2018),

H., Pujiarti, R., Hidayat and P., Wulandari, “Enhanced efficiency in dye-sensitized solar cell by localized surface plasmon resonance effect of gold nanoparticles.” Journal of Nonlinear Optical Physics & Materials, Vol. 28, n. 4, pp. 1950040, (2019).

N. S., Suhaimi, et al. "Brea ppkdown strength of transformer oil filled with carbon nanotubes under various gap distances." Journal of Fundamental and Applied Sciences, Vol. 9, n. 3S, pp. 41-60, (2017).

M. Diethelm, et al. "Finite element modeling for analysis of electroluminescence and infrared images of thin-film solar cells." Solar Energy, Vol. 209, pp. 186-193, (2020).

L. Q., Cao, Z., He, E. I., Wei, and R. S., Chen, “Influence of Geometry of Metallic Nanoparticles on Absorption of Thin-Film Organic Solar Cells: A Critical Examination.” IEEE Access, Vol. 8, pp.145950-145959, (2020).

J., Sladek, V., Sladek, M., Repka and S., Schmauder, “Mixed FEM for quantum nanostructured solar cells.” Composite Structures, Vol. 229, pp. 111460, (2019).

S., Zandi and M., Razaghi, “Finite element simulation of perovskite solar cell: A study on efficiency improvement based on structural and material modification.” Solar Energy, Vol. 179, pp. 298-306, (2019).

K. W., Seo, J., Lee, J., Jo, C., Cho and J. Y., Lee, “Highly efficient (> 10%) flexible organic solar cells on PEDOT”free and ITO”free transparent electrodes.” Advanced Materials, Vol. 31, n. 36, pp. 1902447, (2019).

G., Lucarelli and T. M., Brown, “Development of highly bendable transparent window electrodes based on MoOx, SnO2 and Au dielectric/metal/dielectric stacks: application to indium tin oxide (ITO)-free perovskite solar cells.” Frontiers in Materials, Vol. 6, pp. 310, (2019).

A. Way et al. "Fluorine doped tin oxide as an alternative of indium tin oxide for bottom electrode of semi-transparent organic photovoltaic devices." AIP Advances, Vol 9, n. 8, pp. 085220, (2019).

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).