Full Factorial Design Analysis and Characterization of Polyethylene, Starch and Aloe Vera Gel Thin Film Formulation
How to cite (IJASEIT) :
D. Datta and G. Halder, “Effect of media on degradability, physico-mechanical and optical properties of synthesized polyolefinic and PLA film in comparison with casted potato/corn starch biofilm,” Process Saf. Environ. Prot., vol. 124, pp. 39-62, 2019.
M. Ahmadi, T. Behzad, R. Bagheri, and P. Heidarian, “Effect of cellulose nanofibers and acetylated cellulose nanofibers on the properties of low-density polyethylene/thermoplastic starch blends,” Polym. Int., vol. 67, no. 8, pp. 993-1002, 2018.
T. Mazerolles, M. C. Heuzey, M. Soliman, H. Martens, R. Kleppinger, and M. A. Huneault, “Development of multilayer barrier films of thermoplastic starch and low-density polyethylene,” J. Polym. Res., vol. 27, no. 2, pp. 1-15, 2020.
Y. Hammache, A. Serier, and S. Chaoui, “The effect of thermoplastic starch on the properties of polypropylene/high density polyethylene blend reinforced by nano-clay,” Mater. Res. Express, vol. 7, no. 2, pp. 1-13, 2020.
T. Mazerolles, M. C. Heuzey, M. Soliman, H. Martens, R. Kleppinger, and M. A. Huneault, “Development of co-continuous morphology in blends of thermoplastic starch and low-density polyethylene,” Carbohydr. Polym., vol. 206, no. June 2018, pp. 757-766, 2019.
R. Mani et al., “Biodegradability study by FTIR and DSC of polymers films based on polypropylene and Cassava starch,” Orbital, vol. 11, no. 8, pp. 71-82, Apr. 2019.
N. Khanoonkon, R. Yoksan, and A. A. Ogale, “Morphological characteristics of stearic acid-grafted starch-compatibilized linear low density polyethylene/thermoplastic starch blown film,” Eur. Polym. J., vol. 76, pp. 266-277, 2016.
J. Aburto et al., “Properties of octanoated starch and its blends with polyethylene,” Carbohydr. Polym., vol. 34, no. 1-2, pp. 101-112, 1997.
A. Kaboorani, N. Gray, Y. Hamzeh, and A. Abdulkhani, “Tailoring the low-density polyethylene - thermoplastic starch composites using cellulose nanocrystals and compatibilizer,” Polym. Test., vol. 93, p. 107007, 2021.
A. A. O. Nattaporn Khanoonkona, Rangrong Yoksana, “Effect of stearic acid-grafted starch compatibilizer on properties oflinear low density polyethylene/thermoplastic starch blown film,” Carbohydr. Polym., vol. 137, pp. 165-173, 2016.
D. Datta and G. Halder, “Enhancing degradability of plastic waste by dispersing starch into low density polyethylene matrix,” Process Saf. Environ. Prot., vol. 114, pp. 143-152, 2018.
M. Sabetzadeh, R. Bagheri, and M. Masoomi, “Morphology and rheological properties of compatibilized low-density polyethylene/linear low-density polyethylene/thermoplastic starch blends,” J. Appl. Polym. Sci., vol. 134, no. 16, pp. 1-9, 2017.
D. M. Nguyen, T. V. V. Do, A. C. Grillet, H. Ha Thuc, and C. N. Ha Thuc, “Biodegradability of polymer film based on low density polyethylene and cassava starch,” Int. Biodeterior. Biodegrad., vol. 115, pp. 257-265, 2016.
T. Panrong, T. Karbowiak, and N. Harnkarnsujarit, “Effects of acetylated and octenyl-succinated starch on properties and release of green tea compounded starch/LLDPE blend films,” J. Food Eng., vol. 284, p. 110057, 2020.
R. Thipmanee, S. Lukubira, A. A. Ogale, and A. Sane, “Enhancing distributive mixing of immiscible polyethylene/thermoplastic starch blend through zeolite ZSM-5 compounding sequence,” Carbohydr. Polym., vol. 136, pp. 812-819, 2015.
T. Panrong, T. Karbowiak, and N. Harnkarnsujarit, “Thermoplastic starch and green tea blends with LLDPE films for active packaging of meat and oil-based products,” Food Packag. Shelf Life, vol. 21, p. 100331, 2019.
N. Amigo et al., “Effect of starch nanoparticles on the crystallization kinetics and photodegradation of high density polyethylene,” Compos. Part B Eng., vol. 174, p. 106979, 2019.
N. Gray, Y. Hamzeh, A. Kaboorani, and A. Abdulkhani, “Influence of cellulose nanocrystal on strength and properties of low density polyethylene and thermoplastic starch composites,” Ind. Crops Prod., vol. 115, pp. 298-305, 2018.
A. B. Martins, A. K. Cattelan, and R. M. C. Santana, “How the compatibility between polyethylene and thermoplastic starch can be improved by adding organic acids?,” Polym. Bull., vol. 75, no. 5, pp. 2197-2212, 2018.
R. Radfar et al., “Optimization of antibacterial and mechanical properties of an active LDPE/starch/nanoclay nanocomposite film incorporated with date palm seed extract using D-optimal mixture design approach,” Int. J. Biol. Macromol., vol. 158, pp. 790-799, 2020.
T. J. Gutií©rrez and G. Gonzí¡lez, “Effect of Cross-Linking with Aloe vera Gel on Surface and Physicochemical Properties of Edible Films Made from Plantain Flour,” Food Biophys., vol. 12, no. 1, pp. 11-22, 2017.
S. R. Kanatt and S. H. Makwana, “Development of active, water-resistant carboxymethyl cellulose-poly vinyl alcohol-Aloe vera packaging film,” Carbohydr. Polym., vol. 227, p. 115303, 2020.
G. F. El Fawal, A. M. Omer, and T. M. Tamer, “Evaluation of antimicrobial and antioxidant activities for cellulose acetate films incorporated with Rosemary and Aloe Vera essential oils,” J. Food Sci. Technol., vol. 56, no. 3, pp. 1510-1518, 2019.
T. J. Gutií©rrez and K. ílvarez, “Physico-chemical properties and in vitro digestibility of edible films made from plantain flour with added Aloe vera gel,” J. Funct. Foods, vol. 26, pp. 750-762, 2016.
R. Ortega-Toro, S. Collazo-Bigliardi, J. Roselló, P. Santamarina, and A. Chiralt, “Antifungal starch-based edible films containing Aloe vera,” Food Hydrocoll., vol. 72, pp. 1-10, 2017.
L. Yesappa et al., “Investigation of the Structure, Optical and Electrical Properties of Lithium Perchlorate Doped Polyaniline Composite: Aloe Vera Used as a Bio-Plasticizer,” J. Electron. Mater., vol. 46, no. 12, pp. 6965-6976, 2017.
M. I. Pinzon, L. T. Sanchez, O. R. Garcia, R. Gutierrez, J. C. Luna, and C. C. Villa, “Increasing shelf life of strawberries (Fragaria ssp) by using a banana starch-chitosan-Aloe vera gel composite edible coating,” Int. J. Food Sci. Technol., vol. 55, no. 1, pp. 92-98, 2019.
M. I. Pinzon, O. R. Garcia, and C. C. Villa, “The influence of Aloe vera gel incorporation on the physicochemical and mechanical properties of banana starch-chitosan edible films,” J. Sci. Food Agric., vol. 98, no. 11, pp. 4042-4049, 2018.
U. Verma, R. Rajput, and J. B. Naik, “Development and characterization of Fast Dissolving Film of Chitosan embedded Famotidine Using 32 Full Factorial Design Approach,” Mater. Today Proc., vol. 5, no. 1, pp. 408-414, 2018.
P. R. Vuddanda, M. Montenegro-Nicolini, J. O. Morales, and S. Velaga, “Effect of plasticizers on the physico-mechanical properties of pullulan based pharmaceutical oral films,” Eur. J. Pharm. Sci., vol. 96, pp. 290-298, 2017.
X. Chen, L. Zhou, X. Pan, J. Hu, Y. Hu, and S. Wei, “Effect of different compatibilizers on the mechanical and thermal properties of starch/polypropylene blends,” J. Appl. Polym. Sci., vol. 133, no. 17, pp. 1-7, 2016.
M. Karimi and D. Biria, “The promiscuous activity of alpha-amylase in biodegradation of low-density polyethylene in a polymer-starch blend,” Sci. Rep., vol. 9, no. 1, pp. 1-10, 2019.
S. F. Abd Karim, J. B. Jai, K. H. Ku Hamid, and A. W. Abdul Jalil, “Characteristics and mechanical properties changes due to incorporation of aloe vera in polyethylene-based film,” Sci. Res. J., vol. 17, no. 2, pp. 61-80, 2020.
D. Datta and G. Halder, “Blending of phthalated starch and surface functionalized rice husk extracted nanosilica with LDPE towards developing an efficient packaging substitute,” Environ. Sci. Pollut. Res., vol. 27, no. 2, pp. 1533-1557, 2020.
M. Sabetzadeh, R. Bagheri, and M. Masoomi, “Effect of Oxidized Starch on Morphology, Rheological and Tensile Properties of Low-Density Polyethylene/Linear Low-Density Polyethylene/Thermoplastic Oxidized Starch Blends,” J. Polym. Environ., vol. 26, no. 6, pp. 2219-2226, 2018.
R. Minjares-Fuentes, A. Femenia, F. Comas-Serra, and V. M. Rodríguez-Gonzí¡lez, “Compositional and structural features of the main bioactive polysaccharides present in the aloe vera plant,” J. AOAC Int., vol. 101, no. 6, pp. 1711-1719, 2018.
L. Wang et al., “Effects of fatty acid chain length on properties of potato starch-fatty acid complexes under partially gelatinization,” Int. J. Food Prop., vol. 21, no. 1, pp. 2121-2134, 2018.
S. Fatma, A. Karim, J. Jai, K. Halim, K. Hamid, and A. Wafi, “Effect of crude palm oil , Aloe vera , glycerol , and starch on characteristics and mechanical properties of polyethylene film,” Malaysian J. Chem. Eng. Technol., vol. 3, no. 1, pp. 16-24, 2020.
L. Panahi, M. Gholizadeh, and R. Hajimohammadi, “Investigating the degradability of polyethylene using starch, oxo-material, and polylactic acid under the different environmental conditions,” Asia-Pacific J. Chem. Eng., vol. 15, no. 1, pp. 1-12, 2020.
O. ard Saibuatong and M. Phisalaphong, “Novo aloe vera-bacterial cellulose composite film from biosynthesis,” Carbohydr. Polym., vol. 79, pp. 455-460, 2010.
A. Ramírez-Herní¡ndez et al., “Thermal, morphological and structural characterization of a copolymer of starch and polyethylene,” Carbohydr. Res., vol. 488, p. 107907, 2020.
M. P. Ong-ard Saibuatong, “Novo aloe vera-bacterial cellulose composite film from biosynthesis,” Carbohydr. Polym., vol. 79, pp. 455-460, 2010.
C. Agudelo-Cuartas, D. Granda-Restrepo, P. J. A. Sobral, and W. Castro, “Determination of mechanical properties of whey protein films during accelerated aging: Application of FTIR profiles and chemometric tools,” J. Food Process Eng., vol. 44, no. 5, p. e13477, 2020.
L. Q. Khor and K. Y. Cheong, “Aloe vera gel as natural organic dielectric in electronic application,” J. Mater. Sci. Mater. Electron., vol. 24, no. 7, pp. 2646-2652, 2013.
S. S. and G. H. Datta, Deepshikha, “Effect of thickness and starch phthalate/starch content on the degradability of LDPE/silane-modified nanosilica films: a comparative parametric optimization,” Polym. Bull., vol. 78, pp. 2287-2328, 2021.
X. Liu et al., “Thermal degradation and stability of starch under different processing conditions,” Starch/Starke, vol. 65, pp. 48-60, 2013.
J. Chen, X. Wang, Z. Long, S. Wang, J. Zhang, and L. Wang, “Preparation and performance of thermoplastic starch and microcrystalline cellulose for packaging composites: Extrusion and hot pressing,” Int. J. Biol. Macromol., vol. 165, pp. 2295-2302, 2020.
N. Nordin, S. H. Othman, S. A. Rashid, and R. K. Basha, “Effects of glycerol and thymol on physical, mechanical, and thermal properties of corn starch films,” Food Hydrocoll., vol. 106, p. 105884, 2020.
L. Nieto-Suaza, L. Acevedo-Guevara, L. T. Sí¡nchez, M. I. Pinzón, and C. C. Villa, “Characterization of Aloe vera-banana starch composite films reinforced with curcumin-loaded starch nanoparticles,” Food Struct., vol. 22, p. 100131, 2019.
C. I. Nindo, J. R. Powers, and J. Tang, “Thermal Properties of Aloe Vera Powder and Rheology of Reconstituted Gels,” Trans. ASABE, vol. 53, no. 4, pp. 1193-1200, 2010.
E. Stasi et al., “Biodegradable carbon-based ashes/maize starch composite films for agricultural applications,” Polymers (Basel)., vol. 12, no. 3, pp. 1-16, 2020.
D. Li, L. Zhou, X. Wang, L. He, and X. Yang, “Effect of Crystallinity of Polyethylene with Different Densities on Breakdown Strength and Conductance Property,” Materials (Basel)., vol. 12, no. 11, p. 1746, 2019.
A. L. Da Róz, M. D. Zambon, A. A. S. Curvelo, and A. J. F. Carvalho, “Thermoplastic starch modified during melt processing with organic acids: The effect of molar mass on thermal and mechanical properties,” Ind. Crops Prod., vol. 33, no. 1, pp. 152-157, 2011.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).