Tobermorite Microstructure Resulted from Reaction of Low Content of Silica of Rice Husk Ash and Quicklime Mixture
How to cite (IJASEIT) :
J.G.J. Olivier, G. Janssens-Maenhout M. Muntean, and J.A.H.W. Peters, “Trends in global CO2 emission,” Institute for Environment and Sustainability (IES) of the European Commission’s Joint Research Centre (JRC), JRC Technical Note number: JRC98184, 2015
Y.B. Jung, and K.H. Yang, K.H. “Mixture-proportioning model for low-CO2 concrete considering the type and addition level of supplementary cementitious materials,” J. Korea Concr. Inst., vol. 27, No. 4, pp. 427-434, August. 2015.
F.N. Shahmohamad, and S. Mousazade, “Effect of pozzolana on the environmental influence of cement industry,” International Journal of Metallurgical & Materials Science and Engineering (IJMMSE), vol. 5, no. 1, pp. 21 - 30, Feb. 2015.
L.O. Ettu, I.O. Onyeyili, U.C Anya, C.T.G. Awodiji, and A.P.C Amanze, “Strength of binary blended cement composites containing afikpo rice husk ash,” International Journal of Computational Engineering Research, vol. 3, no. 4, pp. 71-76, April 2013.
L.O. Ettu, I.O. Onyeyili, U.C Anya, C.T.G. Awodiji, and A.P.C Amanze, “Strength of binary blended cement composites containing afikpo rice husk ash,” International Journal of Computational Engineering Research, vol. 3, no. 4, pp. 71-76, April 2013.
S. Munshi, G. Dey, and R.P. Sharma, “Use of rice straw ash as a pozzolanic material in cement mortar,” IACSIT International Journal of Engineering and Technology, vol. 5, no. 5, pp. 603-606, October. 2013.
G.K. Al-Chaar, M. Alkadi, and P.G. Asteris, “Natural pozzolan as a partial substitute for cement in concrete,” The Open Construction and Building Technology Journal, vol. 7, pp. 33-42, 2013
R. Ghosh, and S. Bhattacharjee, “A review study on precipitated silica and activated carbon from rice husk,” J Chem Eng Process Technol, vol. 4, no.4, pp.156-163, April 2013.
O. Kayali, J.M. Khatib, and M.S. Achmed, “The role of industrial by-products in creating sustainable concrete,” Paper Presented at International Seminar of Innovation and Valorization in Civil Engineering and Construction Materials, Rabat, Marocco, November 23-25, 2011.
A. El-Dakroury, and M.S. Gasser, “Rice husk ash (RHA) as cement admixture for immobilization of liquid radioactive waste at different temperatures,” Journal of Nuclear Materials, vol. 381 pp. 271-277, 2008.
A.N. Givi, S.A. Rashid, F.N.A. Aziz, and M.A.M. Salleh, “contribution of rice husk ash to the properties of mortar and concrete: A Review,” Journal of American Science, vol. 6, no. 3, pp. 157-165, 2010.
K. Ganesan, K. Rajagopal, and K. Thangavel, “Rice husk ash blended cement: Assessment of optimal level of replacement for strength and permeability properties of concrete, “ Construction and Building Materials, vol. 22, no. 8, pp. 1675-1683, Augustus, 2008.
Portland Cement Composite Standard, SNI 15-7064-2004, Board of National Standardization, Jakarta, 2004.
V. S. Nikam and V.Y. Tambvekar, “ Effect of different supplementary cementitious material on the microstructure and its resistance against chloride penetration of concrete,” Tech. Rep. of Advanced Materials for Construction of Bridges, Buildings, and Other Structures III, Vol. P5, Article 13, 2003.
G. Sant, D. Bentz, and J. Weiss, “Capillary porosity depercolation in cement-based materials:Measurement techniques and factors which influence their interpretation,” Cement and Concrete Research, vol. 41, pp. 854 - 864, April 2011.
J.J.Thomas, A.J Allen, and H.M. Jennings, “Structural Changes to the Calcium-Silicate-Hydrate Gel Phase of Hydrated Cement with Age, Drying, and Resaturation,”J. Am. Ceram. Soc., 10: 1 - 8, 2008.
A.I. Laskar, and S. Talukdar, “A new mix design method of high-performance concrete,” Asian Journal of Civil Engineering, vol. 9, no. 1, pp 31-39, 2008.
V. Sata, C. Jaturapitakkul, and K. Kiattikomol, “Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete,” Construction and Building Materials, vol. 21, no. 7, pp. 1589-1598, 2006.
P. Pourbeik, “Nanostructure and engineering properties of 1.4 nm tobermorite, jennite and other layered calcium silicate hydrates,” PhD. Thesis, Unversity of Ottawa, Canada, 2015.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).