Experimental Study of Heat Pipe Heat Exchanger in Hospital HVAC System for Energy Conservation

Nandy Setiadi Djaya Putra (1), Trisno Anggoro (2), Adi Winarta (3)
(1) Applied Heat Transfer Research Group Department of Mechanical Engineering, University of Indonesia, Kampus Baru UI, Depok, 16424, Indonesia
(2) Center of Technology for Energy Resources and Chemical Industry, The Agency for The Assessment and Application of Technology, Kawasan PUSPIPTEK Serpong, Tangerang Selatan, 15314, Indonesia
(3) Applied Heat Transfer Research Group Department of Mechanical Engineering, University of Indonesia, Kampus Baru UI, Depok, 16424, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Putra, Nandy Setiadi Djaya, et al. “Experimental Study of Heat Pipe Heat Exchanger in Hospital HVAC System for Energy Conservation”. International Journal on Advanced Science, Engineering and Information Technology, vol. 7, no. 3, June 2017, pp. 871-7, doi:10.18517/ijaseit.7.3.2135.
The hospitals Heating, Ventilation and Air Conditioning (HVAC) systems consume large amounts of energy due to the specific requirements that must be met to ensure environmental conditions are healthy, convenient, and safe. Therefore, to reduce electricity consumption without sacrificing comfort and improving indoor air quality, the utilizing of heat pipe heat exchanger (HPHE) is necessary and highly recommended. An experimental study was conducted to investigate the thermal performance of heat pipe in recovering the heat of an exhaust air from a room simulator. HPHE consists of several tubular heat pipes with water as a working fluid and staggered by up to six rows. The outer diameter of each heat pipe is 13 mm and length of 700 mm with fins mounted on each heat pipe. A series of experiments was conducted to determine the effect of inlet air temperature. The influence of the number of heat pipe rows and air velocity was also investigated. The experiments show that the higher inlet air temperature, the more effective the HPHE performance has become. The cooling capacity of the system has increased. It was indicated by the decrease of air temperature entering the evaporator by 2.4 °C with the effectiveness of 0.15. This result was achieved when using six rows HPHE, air velocity 1 m/s, and evaporator inlet air temperature 45 °C. When air velocity was double to 2 m/s, the system reaches the largest amount of heat recovered of 1404.29 kJ/hour. The overall use of energy in HVAC system from the annual prediction of heat recovery for 8 h/day and 365 days/year will decrease significantly 0.6-4.1 GJ/yr.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).