Biocomposite Materials of Eleocharis dulcis Fibers with Iron (III) Nanoparticles and Its Potential for Sasirangan Textile Wastewater Treatment

Chairul Irawan (1), Iryanti Fatyasari Nata (2), Meilana Dharma Putra (3), Muthia Elma (4), Khairul Fauziah Hanisa (5)
(1) Department of Chemical Engineering, Faculty of Engineering, University of Lambung Mangkurat
(2) Department of Chemical Engineering, Faculty of Engineering, University of Lambung Mangkurat
(3) Department of Chemical Engineering, Faculty of Engineering, University of Lambung Mangkurat
(4) Department of Chemical Engineering, Faculty of Engineering, University of Lambung Mangkurat
(5) Department of Chemical Engineering, Faculty of Engineering, University of Lambung Mangkurat
Fulltext View | Download
How to cite (IJASEIT) :
Irawan, Chairul, et al. “Biocomposite Materials of Eleocharis Dulcis Fibers With Iron (III) Nanoparticles and Its Potential for Sasirangan Textile Wastewater Treatment”. International Journal on Advanced Science, Engineering and Information Technology, vol. 7, no. 4, Aug. 2017, pp. 1234-40, doi:10.18517/ijaseit.7.4.2425.
Eleocharis dulcis (Chinese water chesnut), locally Kalimantan named Purun Tikus, is a plant that grown in highly acidic swamps areas in South Kalimantan. Eleocharis dulcis(ED),was usually used as material for traditional handicrafts. Therefore it is necessary for develop and innovate to convert the material becomes valuables. This research focus on the study of biocomposite nanoparticles of ED and its potentials as an adsorbent to reduce concentration of Pb2+ ion, Total Suspended Solid (TSS) and color from Sasirangan textile industry wastewater. The synthesis of the biocomposite nanocomposite was made by solvothermal synthesis. Firstly, ED stemsdried was cutted to small size (250 micron), then through delignification process to eliminate lignin by 1% w/v NaOH solution. ED delignification put into hydrothermal reactor, right afterward was carried out by one-pot solvothermal reaction of 1,6-diaminohexane, iron (III) chloride hexahydrate, and ethylene glycol at 200 oC for 6 h.The process was produced two types of biocomposites, without the amino group (EDB-M) and the amino group (EDB-MH). The characterization results shown by SEM, magnetic nanoparticles have been formed on the surface of EDfiber.The ED biocomposite nanoparticles (EDB) with diameter size around 30-50 nm could be obtained. X-Ray Diffraction (XRD) analysis showed treatment of EDdelignification was increased the porosity of the fiber, shown by increased Crystalinity Index (CrI) about 72.75%. The biocomposites adsorbent, EDB-M and EDB-MH had adsorption capacity for Pb2+ ions about 44.21 mg/g and 55.62 mg/g at equilibrium pH (pHe) of 6 and equilibrium time of 2 hour. The effectiveness of reduced TSS was about of 91.9% and 98.1%. Beside that, the colour intensity of color was decreased about 96.7% and 97.8% for the EDB-M and EDB-MH, respectively.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).