DOI : https://doi.org/10.18517/ijaseit.8.4.6508

Evaluation of Demand Response on System Reliability and Cable Aging

D B Nugraha (1), K Kopsidas (2), S Liu (3), M Abogaleela (4)
(1) University of Manchester
(2) University of Manchester
(3) University of Manchester
(4) University of Manchester
Fulltext View | Download
How to cite (IJASEIT) :
Nugraha, D B, et al. “Evaluation of Demand Response on System Reliability and Cable Aging”. International Journal on Advanced Science, Engineering and Information Technology, vol. 8, no. 4, Aug. 2018, pp. 1173-8, doi:10.18517/ijaseit.8.4.6508.
Citation Format :
Emergency loading implementation brings reliability and flexibility benefits to the operator. However, its application results in higher cable temperature, which may lead to increase of aging risk. Furthermore, demand response (DR) option can clip the customer loads and shift them to a different period. The DR clipping process reduces the loading of the network to avoid cable overheating and reduce its aging risk. The study aims to evaluate the impact of DR in increasing the reliability of the system as well as reducing the aging of the network. The proposed DR is implemented in the cable-based transmission network, as a complementary of emergency loading, by taking into account the large thermal inertia of the cable. It uses cable temperature elevation as the trigger as an alternative to demand level trigger, which is the traditional approach. The evaluation uses Sequential Monte Carlo Simulation (SMCS) on the IEEE 14 Bus Reliability Test System. The implementation of temperature-based DR reduces the network aging by 3% as well as expected energy not supplied by 34% compared to the emergency loading only.

J. Cochran et al., “Flexibility in 21st Century Power Systems,” 21st Century Power Partnersh., vol. May, p. 14, 2014.

H. Banakar, N. Alguacil, and F. D. Galiana, “Electrothermal coordination Part I: Theory and implementation schemes,” IEEE Trans. Power Syst., vol. 20, no. 2, pp. 798-805, 2005.

N. Alguacil, M. H. Banakar, and F. D. Galiana, “Electrothermal coordination Part II: Case studies,” IEEE Trans. Power Syst., vol. 20, no. 4, pp. 1738-1745, 2005.

R. Olsen, J. Holboell, and U. S. GudmundsdotÌtir, “Electrothermal coordination in cable based transmission grids,” IEEE Trans. Power Syst., vol. 28, no. 4, pp. 4867-4874, 2013.

K. Kopsidas, “Impact of thermal uprating and emergency loading of OHL networks on interconnection flexibility,” Proc. 18th Mediterr. Electrotech. Conf. Intell. Effic. Technol. Serv. Citizen, MELECON 2016, no. April, pp. 18-20, 2016.

D. Huang, R. Billinton, and W. Wangdee, “Effects of demand side management on bulk system adequacy evaluation,” 2010 IEEE 11th Int. Conf. Probabilistic Methods Appl. to Power Syst. PMAPS 2010, pp. 593-598, 2010.

M. Fotuhi-Firuzabad and R. Billinton, “Impact of load management on composite system reliability evaluation short-term operating benefits,” IEEE Trans. Power Syst., vol. 15, no. 2, pp. 858-864, 2000.

T. Eklund, “Impact of Demand Response on Distribution System Operators’ economy,” pp. 1-7, 2014.

D. Huang and R. Billinton, “Effects of load sector demand side management applications in generating capacity adequacy assessment,” IEEE Trans. Power Syst., vol. 27, no. 1, pp. 335-343, 2012.

M. Abogaleela, K. Kopsidas, C. Cruzat, and S. Liu, “Reliability Evaluation Framework Considering OHL Emergency Loading and Demand Response,” pp. 1-6.

M. Abogaleela and K. Kopsidas, “Reliability Enhancements from Demand Response Considering Interrupted Energy Assessment Rates,” 2016.

R. S. Olsen, J. Holboll, and U. S. Gudmundsdottir, “Dynamic temperature estimation and real time emergency rating of transmission cables,” IEEE Power Energy Soc. Gen. Meet., pp. 1-8, 2012.

M. Diaz-aguiló, F. D. E. León, S. Member, S. J. Member, and M. Terracciano, “Ladder-Type Soil Model for Dynamic Thermal Rating of Underground Power Cables,” vol. 1, no. November 2014, pp. 21-30, 2015.

British Standard, “IEC 60287-1-1: Electric cables — Calculation of the current rating,” Br. Stand., vol. 3, pp. 1-31, 1997.

K. Kopsidas and S. Liu, “Power Network Reliability Framework for Integrating Cable Design and Ageing,” IEEE Trans. Power Syst., pp. 1-1, 2017.

C. Grigg and P. Wong, “The IEEE reliability test system -1996 a report prepared by the reliability test system task force of the application of probability methods subcommittee,” IEEE Trans. Power Syst., vol. 14, no. 3, pp. 1010-1020, 1999.

A. Rosso, J. Ma, S. Member, D. S. Kirschen, and L. F. Ochoa, “Assessing the Contribution of Demand Side Management to Power System Flexibility,” pp. 4361-4365, 2011.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).