Greenhouse Monitoring and Automation Using Arduino: a Review on Precision Farming and Internet of Things (IoT)
How to cite (IJASEIT) :
V. Modani, R. Patil, and P. Puri, “IoT Based Greenhouse Monitoring System: Technical Review,” Int. Res. J. Eng. Technol., vol. 10, pp. 2395-56, 2017.
N. Castilla, Greenhouse Technology and Management, 2nd ed. Oxfordshire: CABI, 2013.
P. P. Reddy, Sustainable Crop Protection under Protected Cultivation. Springer Singapore, 2016.
M. K. Jha, S. S. Paikra, and M. R. Sahu, Protected Cultivation of Horticulture Crops. Educreation Publishing, 2019.
A. K. Sharma, S. Wahab, and R. Srivastava, Agriculture Diversification: Problems and Perspectives. I.K. International Publishing House Pvt. Limited, 2010.
A. Bhosure, M. Bhosure, and R. Sharma, “Web Based Greenhouse Environment Monitoring and Controlling System using Arduino Platform,” Int. J. Sci. Eng. Appl. Sci., no. 22, pp. 2395-3470, 2016.
L. Ví¡squez, A. Iriarte, M. Almeida, and P. Villalobos, “Evaluation of greenhouse gas emissions and proposals for their reduction at a university campus in Chile,” J. Clean. Prod., vol. 108, pp. 924-930, 2015.
I. A. Diouf, L. Derivot, F. Bitton, L. Pascual, and M. Causse, “Water Deficit and Salinity Stress Reveal Many Specific QTL for Plant Growth and Fruit Quality Traits in Tomato,” Front. Plant Sci., vol. 9, p. 279, 2018.
P. N. Miklas, R. Delorme, and R. Riley, “Identification of QTL Conditioning Resistance to White Mold in Snap Bean,” J. Am. Soc. Hortic. Sci. jashs, vol. 128, no. 4, 2003.
D. Herví© et al., “QTL analysis of photosynthesis and water status traits in sunflower (Helianthus annuus L.) under greenhouse conditions,” J. Exp. Bot., vol. 52, no. 362, pp. 1857-1864, 2001.
C. García-Gómez, A. Obrador, D. Gonzí¡lez, M. Babín, and M. D. Ferní¡ndez, “Comparative effect of ZnO NPs, ZnO bulk and ZnSO4 in the antioxidant defences of two plant species growing in two agricultural soils under greenhouse conditions,” Sci. Total Environ., vol. 589, pp. 11-24, 2017.
K.-J. Bergstrand, L. M. Mortensen, A. Suthaparan, and H. R. Gislerí¸d, “Acclimatisation of greenhouse crops to differing light quality,” Sci. Hortic. (Amsterdam)., vol. 204, pp. 1-7, 2016.
S. Till, K. Lawrence, P. Donald, and D. Schrimsher, “Nematicides, Starter Fertilizers, and Plant Growth Regulators Implementation into a Corn Production System,” Plant Heal. Prog., vol. 19, no. 3, pp. 242-253, 2018.
N. Schor, S. Berman, A. Dombrovsky, Y. Elad, T. Ignat, and A. Bechar, “Development of a robotic detection system for greenhouse pepper plant diseases,” Precis. Agric., vol. 18, no. 3, pp. 394-409, Jun. 2017.
C. Calderon-Cordova et al., “Wireless sensor network for real-time monitoring of temperature, humidity and illuminance in an orchid greenhouse,” in 2018 13th Iberian Conference on Information Systems and Technologies (CISTI), 2018, pp. 1-7.
A. Kumar, G. N. Tiwari, S. Kumar, and M. Pandey, “Role of Greenhouse Technology in Agricultural Engineering,” Int. J. Agric. Res., vol. 1, no. 4, pp. 364-372, 2006.
R. C. Ward, J. C. Loftis, and G. B. McBride, Design of Water Quality Monitoring Systems. Wiley, 1990.
R. T. Gazzaway et al., “Guidance on Monitoring Internal Control Systems,” Durham, 2009.
A. F. Hussein, N. A. kumar, M. Burbano-Fernandez, G. Ramírez-Gonzí¡lez, E. Abdulhay, and V. H. C. De Albuquerque, “An Automated Remote Cloud-Based Heart Rate Variability Monitoring System,” IEEE Access, vol. 6, pp. 77055-77064, 2018.
P. Adolfsson, C. G. Parkin, A. Thomas, and L. G. Krinelke, “Selecting the Appropriate Continuous Glucose Monitoring System - a Practical Approach,” Eur. Endocrinol., vol. 14, no. 1, pp. 24-29, Apr. 2018.
R. Amin, S. K. H. Islam, G. P. Biswas, M. K. Khan, and N. Kumar, “A robust and anonymous patient monitoring system using wireless medical sensor networks,” Futur. Gener. Comput. Syst., vol. 80, pp. 483-495, 2018.
J. Izquierdo-Reyes, R. A. Ramirez-Mendoza, M. R. Bustamante-Bello, S. Navarro-Tuch, and R. Avila-Vazquez, “Advanced driver monitoring for assistance system (ADMAS),” Int. J. Interact. Des. Manuf., vol. 12, no. 1, pp. 187-197, 2018.
Zaida, I. Ardiansah, and M. A. Rizky, “Rancang Bangun Alat Pengendali Suhu Dan Kelembaban Relatif Pada Rumah Kaca Dengan Informasi Berbasis Web,” J. Teknotan, vol. 11, no. 1, 2017.
I. Ardiansah, S. H. Putri, A. Y. Wibawa, and D. M. Rahmah, “Optimalisasi Ketersediaan Air Tanaman dengan Sistem Otomasi Irigasi Tetes Berbasis Arduino Uno dan Nilai Kelembaban Tanah,” Ultim. J. Tek. Inform., vol. 10, no. 2, pp. 78-84, 2018.
Y. Hashimoto, “Computer Control of Short Term Plant Growth by Monitoring Leaf Temperature,” in Acta Horticulturae, 1980, no. 106, pp. 139-146.
T. A. Hughes, Measurement and Control Basics, 4th ed. Durham: The Instrumentation, Systems, and Automation Society, 2006.
L. M. Winston, Basic Hydraulics and Controls, 1st ed. Smashwords Edition, 2015.
B. R. Mehta and Y. J. Reddy, Industrial Process Automation Systems: Design and Implementation. Waltham: Elsevier Inc., 2015.
K. L. S. Sharma, Overview of Industrial Process Automation. Elsevier Science, 2011.
K. V. Shibu, Introduction to Embedded Systems, 1st ed. Tata McGraw-Hill Education, 2009.
N. Bencheva and N. Kostadinov, “Teaching Hardware/Software Co-design of Embedded Systems - a Case Study,” in 2017 27th EAEEIE Annual Conference (EAEEIE), 2017, pp. 1-2.
S. Nuratch, “Design and Implementation of Real-time Embedded Data Acquisition and Classification with Web-based Configuration and Visualization,” in 2018 International Conference on Embedded Systems and Intelligent Technology International Conference on Information and Communication Technology for Embedded Systems (ICESIT-ICICTES), 2018, pp. 1-4.
I. Ardiansah and S. H. Putri, “Perbandingan Analisis SWOT Antara Platform Arduino UNO dan Raspberry Pi,” in Seminar Nasional MIPA, 2016, pp. 27-28.
K. Karvinen and T. Karvinen, Getting Started with Sensors: Measure the World with Electronics, Arduino, and Raspberry Pi. Maker Media, Incorporated, 2014.
P. D. R. S. K. Nikesh Gondchawar, “IoT based Smart Agriculture,” Int. J. Adv. Res. Comput. Commun. Eng., vol. 5, no. 6, pp. 838-842, 2016.
V. Aror, D. Malonda, M. Patabo, and Y. Putung, “Utilization of Solar Cells as Energy Sources for Heating and Fan (Ex-house) in White Copra Dryers with Arduino Uno as Temperature Control,” in 2018 International Conference on Applied Science and Technology (iCAST), 2018, pp. 521-525.
Y. Wang and Z. Chi, “System of wireless temperature and humidity monitoring based on Arduino Uno platform,” Proc. - 2016 6th Int. Conf. Instrum. Meas. Comput. Commun. Control. IMCCC 2016, pp. 770-773, 2016.
J. Islam et al., “Design and Development of Microcontroller Based Wireless Humidity Monitor,” IOSR J. Electr. Electron. Eng., vol. 13, no. 2, pp. 41-46, 2018.
M. S. Kumar, T. R. Chandra, D. P. Kumar, and M. S. Manikandan, “Monitoring moisture of soil using low cost homemade Soil moisture sensor and Arduino UNO,” in 2016 3rd International Conference on Advanced Computing and Communication Systems (ICACCS), 2016, vol. 01, pp. 1-4.
Y. S. Chang, Y. Hsiung Chen, and S. K. Zhou, “A smart lighting system for greenhouses based on Narrowband-IoT communication,” in 2018 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), 2018, pp. 275-278.
G. Z. Hong and C. L. Hsieh, “Application of Integrated Control Strategy and Bluetooth for Irrigating Romaine Lettuce in Greenhouse,” IFAC-PapersOnLine, vol. 49, no. 16, pp. 381-386, 2016.
K. V De Oliveira, H. M. Esgalha Castelli, S. J. Montebeller, and T. G. Prado Avancini, “Wireless Sensor Network for Smart Agriculture using ZigBee Protocol,” in 2017 IEEE First Summer School on Smart Cities (S3C). Proceedings, pp. 61-6.
T. Kalaivani, A. Allirani, and P. Priya, “A survey on Zigbee based wireless sensor networks in agriculture,” TISC 2011 - Proc. 3rd Int. Conf. Trendz Inf. Sci. Comput., no. i, pp. 85-89, 2011.
J. Brinkhoff and J. Hornbuckle, “Characterization of WiFi signal range for agricultural WSNs,” in 2017 23rd Asia-Pacific Conference on Communications (APCC), 2017, pp. 1-6.
G. R. Mendez, M. A. Md Yunus, and S. C. Mukhopadhyay, “A WiFi based smart wireless sensor network for an agricultural environment,” in 2011 Fifth International Conference on Sensing Technology, 2011, pp. 405-410.
A. Becker, D. Caddell, and R. Gutierrez, “Integrated Farming System,” 2012.
H. Ping, J. Wang, Z. Ma, and Y. Du, “Mini-review of application of iot technology in monitoring agricultural products quality and safety,” Int. J. Agric. Biol. Eng., vol. 11, no. 5, pp. 35-45, 2018.
A. Hammami, “Smart Environment Data Monitoring,” in 2019 International Conference on Computer and Information Sciences (ICCIS), 2019, pp. 1-6.
Y. K. Taru and A. Karwankar, “Water monitoring system using arduino with labview,” in 2017 International Conference on Computing Methodologies and Communication (ICCMC), 2017, pp. 416-419.
S. O. Osman, M. Z. Mohamed, A. M. Suliman, and A. A. Mohammed, “Design and Implementation of a Low-Cost Real-Time In-Situ Drinking Water Quality Monitoring System Using Arduino,” in 2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE), 2018, pp. 1-7.
C. Morón, J. P. Diaz, D. Ferrí¡ndez, and P. Saiz, “Design, development and implementation of a weather station prototype for renewable energy systems,” Energies, vol. 11, no. 9, 2018.
R. W. Mankin, B. B. Rohde, S. A. Mcneill, T. M. Paris, N. I. Zagvazdina, and S. Greenfeder, “ Diaphorina citri (Hemiptera: Liviidae) Responses to Microcontroller-Buzzer Communication Signals of Potential Use in Vibration Traps ,” Florida Entomol., vol. 96, no. 4, pp. 1546-1555, 2013.
G. Samseemoung, P. Soni, and P. Suwan, “Development of a variable rate chemical sprayer for monitoring diseases and pests infestation in coconut plantations,” Agric., vol. 7, no. 10, 2017.
C. Zhai, A. Landers, and B. Zhang, “An RFID-based solution for monitoring sprayer movement in an orchard/vineyard,” Precis. Agric., vol. 19, no. 3, pp. 477-496, 2018.
T. Leonello, “From precision agriculture to Industry 4.0,” Br. Food J., vol. 121, no. 8, pp. 1730-1743, Jan. 2019.
M. Paustian and L. Theuvsen, “Adoption of precision agriculture technologies by German crop farmers,” Precis. Agric., vol. 18, no. 5, pp. 701-716, 2017.
Y. Tian, B. Zheng, and Z. Li, “Agricultural greenhouse environment monitoring system based on Internet of Things,” in 2017 3rd IEEE International Conference on Computer and Communications (ICCC), 2017, pp. 2981-2985.
N. Kitpo, Y. Kugai, M. Inoue, T. Yokemura, and S. Satomura, “Internet of Things for Greenhouse Monitoring System Using Deep Learning and Bot Notification Services,” in 2019 IEEE International Conference on Consumer Electronics (ICCE), 2019, pp. 1-4.
F. M. A. Taha, A. A. Osman, S. D. Awadalkareem, M. S. A. Omer, and R. S. M. Saadaldeen, “A Design of a Remote Greenhouse Monitoring and Controlling System Based on Internet of Things,” in 2018 International Conference on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE), 2018, pp. 1-6.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).