Numerical Study: Effect of Various Link Length to Lateral Force in Eccentrically Braced Frame
How to cite (IJASEIT) :
K. D. Hjelmstad and E. P. Popov, "Characteristics of Eccentrically Braced Frames," Journal of Structural Engineering, vol. 110, no. 02, pp. 340-353, 1984.
R. Becker and M. Ishler, Seismic Design Practice For Eccentrically Braced Frames Based on The 1994 UBC, Moraga,CA: Structural Steel Educational Council, 1996.
F. Wang, M. Su, M. Hong, Y. Guo and S. Li, "Cyclic behavior of Y-shaped eccentrically braced frames fabricated with high-strength steel composite," Journal of Constructional Steel Research, vol. 120, p. 176-187, 2016.
S. Caprili, N. Mussini, and W. Salvatore, "Experimental and Numerical Assessment of EBF Structures with Shear Links," Steel and Composite Structures, vol. 28, no. 2, pp. 123-138, 2018.
H. Noorinekoo, "Assesment of Behavior Factor of Eccentrically Braced Frame," Journal of Fundamental and Applied Sciences, pp. 676-692, 2017.
M. Mojarad, M. Daei, and M. Hejazi, "Optimal Stiffeners Spacing for Intermediate Link in Eccentrically Braced Frame to Increase Energy Dissipation," AUT Journal of Civil Engineering, vol. 1, no. 1, pp. 39-44, 2017.
G. YiÄŸitsoy, C. Topkaya, and T. Okazaki, "Stability of beams in steel eccentrically braced frames," Journal of Constructional Steel Research 96, pp. 14-25, 2014.
E. P. Popov and M. D. Engelhardt, "Seismic Eccentrically Braced Frames," Construct. Steel Research, 0143/974X/88, 321-354, 1988.
J. Bouwkamp, M. G. Vetr and A. Ghamari, "An analytical model for the inelastic cyclic response of eccentrically braced frame with vertical shear link (V-EBF)," Case Studies in Structural Engineering, vol. 6, pp. 31-44, 2016.
M. Bruneau, C. M. Uang and R. Sabelli, Ductile Design of Steel Structures 2nd Edition, United States: The McGraw-Hill Companies,Inc., 2011.
B. Budiono, Yurisman, and Nidiasari , "Perilaku Link Panjang denganPengaku Diagonal Badan pada Sistem Struktur Rangka Baja Tahan Gempa," in Pameran HAKI 2011 "Konstruksi Indonesia Melangkah ke Masa Depan", Jakarta, 2011.
American Institute of Steel Construction, Seismic Provisions for Structural Steel Building, Chicago: AISC, 2010.
R. Rahnavard, A. Hassanipour, M. Suleiman and A. Mokhtari, "Evaluation on Eccentrically Braced Frame with Single and Double Shear Panels," Journal of Building Engineering, vol. 10, pp. 13-25, 2017.
B. Suswanto, A. R. Amalia, E. Wahyuni and J. Wilson, "Numerical Behavior Study of Short Link, Intermediate Link and Long Link in Eccentrically Braced Frame Steel Structure," International Journal of Applied Engineering Research , vol. Volume 12, no. Number 21, pp. 11460-11471, 2017.
S. K. Azad and C. Topkaya, "A review of research on Steel Eccentrically Braced Frames," Journal of Constructional Steel Research, vol. 128, pp. 53-73, 2017.
A. Ghobarah and T. Ramadan, "Seismic Analysis of Links of Variation Lengths in Eccentrically Braced Frames," Canadian Journal of Civil Engineering, vol. 18, pp. 140-148, 1991.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).