Performance of Untreated Waste Cooking Oil Blends in a Diesel Engine

Md Isa Ali (1), Shahrir Abdullah (2), Taib Iskandar Mohamad (3)
(1) Department of Mechanical and Material Engineering, National University of Malaysia
(2) Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia
(3) Department of Mechanical and Material Engineering, National University of Malaysia
Fulltext View | Download
How to cite (IJASEIT) :
Ali, Md Isa, et al. “Performance of Untreated Waste Cooking Oil Blends in a Diesel Engine”. International Journal on Advanced Science, Engineering and Information Technology, vol. 1, no. 5, Oct. 2011, pp. 523-7, doi:10.18517/ijaseit.1.5.106.
Untreated waste cooking oil (UWCO) is not a feasible diesel fuel. The major problems in engine operation are reported mainly due to UWCO’s high viscosity. To use  UWCO's in diesel engine without modification, it is necessary to make sure that the oils properties must be similar to diesel fuel. In this study, UWCO that has been used several times for frying purposes is investigated for the utilization as an alternative fuel for diesel engines. In order to reduce the viscosity, the UWCO were blend with diesel. Two various blends of UWCO and diesel were prepared and its important properties such as viscosity, density, calorific value and flash point were  evaluated and compared with that of diesel. The blends were then tested in a direct injection diesel engine  in 10% and 30% v/v blends with a reference diesel fuel. Tests were performed under a set of engine operating conditions. It was found that blending UWCO with diesel reduces the viscosity.  Blending of UWCO with diesel has been shown to be an effective method to reduce engine problems associated with the high viscosity of UWCO. The experimental results also show that the basic engine performance such as power output and  fuelconsumptions are comparable to diesel and the emissions of CO and NOx from the UWCO/diesel blends were also found slightly higher than that of diesel fuel.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).