Implementation of Ergonomic-Based Work Procedures Reducing Complaints of Postural Stress and Work Fatigue Resulting in Increased Employee Income and Company Profit

Wahyu Susihono (1), - Ariesca (2), Lovely Lady (3)
(1) Industrial Engineering Department, Faculty of Engineering, University of Sultan Ageng Tirtayasa, Banten, Indonesia
(2) Industrial Engineering Department, Faculty of Engineering, University of Sultan Ageng Tirtayasa, Banten, Indonesia
(3) Industrial Engineering Department, Faculty of Engineering, University of Sultan Ageng Tirtayasa, Banten, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Susihono, Wahyu, et al. “Implementation of Ergonomic-Based Work Procedures Reducing Complaints of Postural Stress and Work Fatigue Resulting in Increased Employee Income and Company Profit”. International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 1, Feb. 2021, pp. 150-7, doi:10.18517/ijaseit.11.1.11046.
In general, the manufacturing industry relies more on machine-based processes. However, in certain activities, human labor is still needed due to the limitations of the machine function, as humans are faster than the machine. However, the activities using human muscle power are at risk of postural stress and early work fatigue. Work fatigue will affect work performance and productivity. The Standard Operating Procedures (SOP), which do not consider work attitude, will result in inconvenience at work and complaints on body parts and decreased performance. Besides, it also causes the inability to meet production targets so that employees cannot reach the maximum wage, and the company suffers losses. The redesign of the Standard Operating Procedures (SOP) is needed to make people as the center of all improvement activities. The design used in this study was treatment by subject design. The results showed that there were differences (p <0.05) between pre- and post-intervention results, Decreased postural stress complaints (moment of compressive force) in posture 1 (7.31%), posture 2 (23.09%), and posture 3 (4.74%). In comparison, the reduction of work fatigue was obtained from 81.26±10.85 to 70.87±3.68 (12.78%). After the implementation of ergonomic-based SOPs, there was an increase in employee income by 25.23% or (IDR 2,068,091/month) and an increase in company profits (IDR 51,702,286/month). The implementation of ergonomic-based SOPs was able to reduce postural stress, fatigue, and to increase employee income and company profits.

K. Kandananond, “The incorporation of virtual ergonomics to improve the occupational safety condition in a factory,” Int. J. Metrol. Qual. Eng., vol. 9, no. 14, Nov. 2018.

A. C. Falck, M. Rosenqvist, “A model for calculation of the costs of poor assembly ergonomics (part 1),” International Journal of Industrial Ergonomics., vol 44, pp. 140-147, Jan. 2014.

J. A. Eklund, “Relationships between ergonomics and quality in assembly work,” Applied Ergonomics., vol. 26, pp. 15-20, Feb. 1995.

D. Ng, C. McNee, J. M. Kieser Farella. “Neck and shoulder muscle activity during standardized work-related postural tasks,” Applied Ergonomics., vol. 45, pp. 556-563, May. 2014.

C. Restrepo, E. Salgado, “Types of contracts and worker absenteeism in Colombia,” Journal of Business Research., vol 66, pp. 401-408, March. 2013.

A. Colim, P. Carneiro, N. CostaP. M. Arezes, N. Sousa, “Ergonomic assessment and workstation design in a furniture manufacturing industry—a case study,”Occupational and Environmental Safety and Health., vol 202, pp. 409-417, Feb. 2019.

C. Mí¼hlemeyer, “Assessment and design of employees-cobot-interaction,” International Conference on Human Interaction and Emerging Technologies., Vol. 1018, pp. 771-776, July. 2019

D. Braatz, E. Paravizo, M. V. G. M. Campos, C. F. Zzoni, C. A. G. Sirqueira, “Developing a Framework for a Participatory Ergonomics Design Processes: The MPEC Method,” Advances in Intelligent Systems and Computing., vol. 824, pp. 1048-1057, Aug. 2018

P. McCulloch, L. Morgan, S. New, K. Catchpole, E. Roberston, M. Hadi, S. Pickering, G. Collins, D. Griffin, “Combining systems and teamwork approaches to enhance the effectiveness of safety improvement interventions in surgery: The safer delivery of surgical services (S3) program,” Annals of Surgery., vol. 265, pp. 90-96, Jan. 2017.

L. MartiÌnez, O. Oviedo, C. Luna, “Impact of working conditions on the quality of working life: Case manufacturing sector Colombian Caribbean region,” DYNA., vol. 82, pp. 194-203, June. 2015.

M. McClung, R. Baron, M. Bouxsein, “An update on osteoporosis pathogenesis,diagnosis, and treatment,” Bone., Vo;. 98, no. 37, May. 2017.

P. A. M. Simons, R. Houben, J. Benders, M. Pijls-Johannesma, D. Vandijck, W. Marneffe, H. Backes, S. Groothuis, “Does compliance to patient safety tasks improve and sustain when radiotherapy treatment processes are standardized?,” European Journal of Oncology Nursing., vol 18, pp. 459-465, Oct. 2014.

K. G. Davis, S. E. Kotowski, “Postural variability: aneffective way to reduce musculoskeletal discomfortinofficework,” Hum. Factors J. Hum. Factors Ergon., Vol. 56, pp. 1249-1261, Nov. 2014,

K. A. Sheen, Y. Luximon, K.H. Fung, S.H. Chak, W. Y. Chiu, W. S. Chan, “Usability study and redesign of the food tray,” Advances in Intelligent Systems and Computing., Vol. 794, pp. 397-403, June. 2019.

D. Deb, T. Deb, M. Sharma, “Redesign of a railway coach for safe and independent travel of elderly,” Advances in Intelligent Systems and Computing., vol. 748, pp. 147-156, Jan. 2019.

S. Warming, D.H. Precht, P. Suadicani, N. E. Ebbehoj, "Musculoskeletal complaints among nurses related to patient handling tasks and psychosocial factors - Based on logbook registrations," Applied Ergonomics., Vol 40 (4), pp 569-576, July. 2008. DOI: 10.1016/j.apergo.2008.04.021

Bahador, Ghahramani, "A Model to Analyze Ergonomics Working Conditions," International Journal of Occupational Safety and Ergonomics., vol 6 (2), pp 223-236, Jan. 2015. DOI: 10.1080/10803548.2000.11076453

L. Panach, B. Pineda, D. Mifsut, J. J. Tarí­n, A. Cano, M. A. Garcí­a-Pí©rez, “The roleof CD40 and CD40L in bone mineral density and in osteoporosis risk: a genetic andfunctional study,” Bone., vol. 83, pp. 94-103, Feb. 2016.

K. Kandananond, “The incorporation of virtual ergonomics to improve the occupational safety condition in a factory,” International Journal of Metrology and Quality Engineering., vol. 9, no. 14, Dec. 2018.

P. VanGeffen, J. Reenalda, P. H. Veltink, B. F. J. M. Koopman, “Effects Of Sagittal Postural Adjustments On Seat Reaction load,” J.Biomech., vol. 41, pp. 2237-2245, Feb. 2008.

A. R. Benedetto, “Six Sigma: not for the faint of heart," Radiology management., vol. 25, 4pp. 0-53, Nov. 2003.

K. H. E. Sondergaard, C. G. Olesen, E. K. Sí¸ndergaard, M. deZee, P. Madeleine, “The Variability and Complexity of Sitting Postural control are associated with-comfort,” J. Biomech., vol. 43, pp. 1997-2001, July. 2010,

L. Womersley, S. May, “Sitting Posture of Subjects with Postural Backache,” J. Manip. Physiol. Ther., vol. 29. pp. 213-218, Mar. 2006,

J. H. VanDieí«n, M. P. DeLooze, V. Hermans, “Effects Of Dynamic office chairs on Trunk Kinematics, trunk extensor EMG and spinal shrinkage,”Ergonomics., vol. 44, no. 7. pp.739-750, Nov. 2010,

V. Riethmeister, R. W. Matthews, D. Dawson, M. R. de-Boer, S. Brouwer, U. Bültmann, “Time-of-day and days-on-shift predict increased fatigue over two-week off-shore day-shifts,” Appl. Ergon., vol. 78, pp. 157-163, July. 2019, 02.010.

Y. Zhu, X. Geng, Q. Zhang, “Research on Curriculum Reform of Industrial Training Center Based on PDCA Cycle,” International Journal of Information and Education Technology., vol. 9, no. 8. pp. 570-574, Aug. 2019.

S. T. Wu, S. R. Hammons, J. Wang, C. Assisi, B. DiPietro, H. F. Oliver, “Predictive risk models combined with employee- and management-implemented SSOPs identified and reduced Listeria monocytogenes prevalence in retail delis,” Food Control., vol. 109, no.106942, March. 2020.

M. Kifle, “Work related injuries and associated risk factors among iron and steel industries workers in Addis Ababa, Ethiopia,” Safety Science., vol. 63, pp. 211-216, March. 2014.

P. Bohle, H. Willaby, M. Quinlan, M. McNamara, “Flexible work in call centres: working hours, work-life conflict & health,” Appl. Ergon., vol 42, pp. 219-224, June. 2011,

M. Takahashi, K. Iwasaki, T. Sasaki, T. Kubo, I. Mori, Y. Otsuka, “Worktime control-dependent reductions in fatigue, sleep problems, and depression,” Appl. Ergon., vol. 42, pp. 244-250, June. 2011.

N. T. Putri, L. S. Dona, “Application of lean manufacturing concept for redesigning facilities layout in Indonesian home-food industry: A case study,” TQM Journal., vol. 31, pp. 815-830, Sept. 2019.

M. Massiris, R. Peña, O. Oviedo, M. Maestre, “Hand Anthropometry of Colombian Caribbean College Students Using Software Based Method,” Procedia Computer Science., vol. 67, pp. 123-131, Sept. 2015.

M. Massiris, M. Maestre, R. P. Niebles, O. Oviedo, “Convergent validity of an application for hand anthropometric measurement,” in IEEE-EMBS International Conference on Biomedical and Health Informatics (BHI). Valencia, Spain., pp. 45-48, June. 2014.

J. Dul, W. P. Neumann, “Ergonomics contributions to company strategies,” Applied Ergonomics., vol. pp. 40, 745-752, July. 2009.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).