Analysis of Chemical and Phase Composition in Powder of U-Zr-Nb Post Hydriding-Dehydriding Process
How to cite (IJASEIT) :
Supardjo, H. Suwarno, and A. Kadaryono, “Characterization of U-7% Mo and U-7% Mo-x% Si alloys (x = 1, 2, and 3%) results from the melting process in the electric arc furnace,” J. Urania, vol. 15, no. 4, pp. 171-232, 2009.
Masrukan, D. Mustika, D. A. Perdana, and Jumaeri, “Analysis of elemental composition, density, macrostructure, and phase formation of U-6Zr-xNb alloy post corrosition test,” J. Urania, vol. 26, no. 3, p. 155, 2020.
S. Kaity, J. Banerjee, S.C Parida, and V.Bahsin, “Structural, microstructural, and thermal analysis of U-(6-x)Zr-xNb alloys (x- 2,4,6),” J. Nucl. Mater., vol. 504, pp. 234-250, 2018.
Masrukan and J. Setiawan, “Ingot characteristic of U-Zr-Nb alloys post quenching process,” J. Urania, vol. 23, no. 2, pp. 87-96, 2017.
Nathanael Wagner Sales Morai, Denise Adorno Lopes, and Clí¡udio Geraldo Sc, “Effect of thermo mechanical processing on microstructure and mechanical properties of U - Nb - Zr alloys,” J. Mater., vol. 502, pp. 51-59, 2018.
R. Mariani et al., “Initial evaluation of fuel-reactor concepts for advanced LEU fuel development,” in INL/EXT-20-54641, 2020.
Suryanarayana, “Mechanical Alloying: A Novel Technique to Synthesize Advanced Materials,” Res. (Wash D C), vol. 2019, 2019.
M. Masrukan, M. H. Alhasa, and E. Yusnitha, “Fabrication of Fuel Element Core (FEC) of U-6Zr-5Nb/Al to be Fuel Element Plate (FEP) with variation of uranium density,” J. Mater. Res. Tecnol., vol. 10, no. February, pp. 216-224, 2021.
B. Beeler, Y. Zhang, and M. Okuniewski, “Calculation of the displacement energy of α and γ uranium,” J. Nucl. Mater., vol. 508, 2018.
A. da S. Ferreira, F. R. Longe, R. A. M. Gotardo, Flí¡vio Francisco Ivashita, Reginaldo Barco, and Andrea Paesano Jíºnior, “Synthesis and Structural Charac terization of U-Zr-Nb Alloys,” J. Mater. Res., vol. 21, no. 1, 2017.
N. W. S. Morais, A. Lopes, and C. G. Schon, “Effect of thermo-mechanical processing on microstructure and mechanical properties of U - Zr alloys: Part 1 - U-6 wt. % Nb -6 wt. % Zr,” J. Nucl. Mater., vol. 488, pp. 173-180, 2017.
B.M. Aguiar, “Refining U-Zr-Nb Alloys By Remelting,” in International Nuclear Atlantic Conference (INAC) Belo Horizonte, 2011.
M. Masrukan, Yanlianastuti, M.H.Al Hasa, and Arief Sasongko Adhi, “Analysis of composition, density, thermal properties of U-Zr-Nb alloy powder for nuclear fuel,” J. Phys., vol. 1198, no. 3, 2019.
W. Chen and X.-M. Bai, “Temperature and composition dependent thermal conductivity model for U-Zr alloys,” J. Nucl. Mater., vol. 507, pp. 360-370, 2018.
S. Kaity, J. Banerjee, S. C. Parida, and V. Bhasin, “Structural, microstructural and thermal analysis of U−(6-x)Zr−xNb alloys (x = 0, 2, 4, 6),” J. Nucl. Mater., vol. 504, pp. 234-250, 2018.
Y. Park, R.Newell, A.Mehta, D.D.Keiser Jr, and Y.H.Sohn, “Interdiffusion and reaction between U and Zr,” Jouranl Nucl. Mater., vol. 504, pp. 42-50, 2018.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).