DOI : https://doi.org/10.18517/ijaseit.11.4.11430

The Relationship between Overloading and Over Dimension of Freight Vehicle

Anton Budiharjo (1), Ahmad Fauzi (2), - Masrukhin (3), Bagus Prasetyo (4)
(1) Road Transportation Safety Management Program, Politeknik Keselamatan Transportasi Jalan, Indonesia
(2) Road Transportation Safety Management Program, Politeknik Keselamatan Transportasi Jalan, Indonesia
(3) Road Transportation Safety Management Program, Politeknik Keselamatan Transportasi Jalan, Indonesia
(4) Road Transportation Safety Management Program, Politeknik Keselamatan Transportasi Jalan, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Budiharjo, Anton, et al. “The Relationship Between Overloading and Over Dimension of Freight Vehicle”. International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 4, Aug. 2021, pp. 1588-93, doi:10.18517/ijaseit.11.4.11430.
Citation Format :
The freight vehicle, as the primary mode of goods distribution, has a relatively small carrying capacity.  However, it is forced to be able to meet the demand. As a result, many business actors overload their freight vehicles to reduce transportation costs. In organizing the transportation of goods, the indications are such violations in vehicle dimensions (over dimensions) in line with the business actors' vehicle overload. This study aims to determine the effect of over-size on an overload of the freight vehicle. This study's research method is a quantitative method that used a survey technique to collect the data and used the statistical method of regression and correlation as the analysis method. The study results reveal that the level of overloading at Widang weighbridge reached an average of 44.72% per day. In comparison, the level of overloading at the Losarang weighbridge reached 87.85% per day. The vehicle dimension measurement survey results showed that from 159 vehicle samples, there were 107 over-dimension vehicles in the form of length, width, and height, and there were 32 vehicles, which increased their tire size. The statistical analysis of regression and correlation tests showed that only the addition of the maximum vehicle dimensions, which had a significant effect on the overweight.

C. M. Krause and L. Zhang, “Short-term travel behavior prediction with GPS, land use, and point of interest data,” Transp. Res. Part B, vol. 123, no. 76, pp. 349-361, 2019.

C. J. Nash and D. J. Cole, “Identification and validation of a driver steering control model incorporating human sensory dynamics,” Int. J. Veh. Mech. Mobil., vol. 31, no. 14, pp. 495-517, 2020.

D. Milne et al., “The influence of variation in track level and support system stiffness over longer lengths of track for track performance and vehicle track interaction and vehicle track interaction,” Veh. Syst. Dyn., vol. 10, no. 3, pp. 1-24, 2019.

Y. Wang, W. Y. Szeto, K. Han, and T. L. Friesz, “Dynamic traffic assignment : A review of the methodological advances for environmentally sustainable road transportation applications,” Transp. Res. Part B, vol. 111, no. 33, pp. 370-394, 2018.

I. Simanjuntak, “Analysis of the Effect of Overloading on Road Performance and Age of a Flexible Pavement Plan (Case Study of Pringsurat Highway, Ambarawa-Magelang),” J. Civ. Eng., vol. 5, no. 13, pp. 88-99, 2014.

V. Fors, B. Olofsson, L. Nielsen, V. Fors, and B. Olofsson, “Attainable force volumes of optimal autonomous at-the-limit vehicle manoeuvres vehicle manoeuvres,” J. Heavy Veh., vol. 12, no. 34, pp. 517-528, 2019.

M. of Transportation, Road Traffic and Transport. Indonesia, 2009.

W. Zhai, Z. Han, Z. Chen, L. Ling, and S. Zhu, “Train - track - bridge dynamic interaction : a state-of- the-art review,” Int. J. Veh. Mech. Mobil., vol. 56, no. 12, pp. 984-1027, 2019.

G. Morrison, D. Cebon, G. Morrison, and D. Cebon, “Sideslip estimation for articulated heavy vehicles at the limits of adhesion,” Veh. Syst. Dyn., vol. 54, no. 11, pp. 1601-1628, 2016.

M. Mahmoudi, J. Chen, T. Shi, and Y. Zhang, “A cumulative service state representation for the pickup and delivery problem with transfers,” Transp. Res. Part B, vol. 129, no. 87, pp. 351-380, 2019.

L. I. Harlyan, “Statistical Hypothesis Test (MAM 4137) Dept. Malang Fisheries and Marine Resource Management,” Malang, 2013.

Ministry of Transportation, Vehicles. 2012, p. 55.

S. F. A. Batista, L. Leclercq, and N. Geroliminis, “Estimation of regional trip length distributions for the calibration of the aggregated network traffic models,” Transp. Res. Part B, vol. 122, no. 12, pp. 192-217, 2019.

S. Kharrazi, B. Augusto, and N. Frí¶jd, “Vehicle dynamics testing in motion based driving simulators,” Veh. Syst. Dyn., vol. 58, no. 1, pp. 92-107, 2020.

J. W. Creswell, Educational research: Planning, conducting, and evaluating quantitative and qualitative research (4th ed.), 4th ed. Boston, MA: Pearson, 2012.

D. G. of L. Transportation, Provisions Regarding Bulk Goods Transportation. Indonesia, 2003, p. 56.

H. Bergland and P. Andreas, “Efficiency and traffic safety with pay for performance in road transportation,” J. Transp., vol. 130, no. 34, pp. 21-35, 2019.

M. Paipuri and L. Leclercq, “Bi-modal macroscopic traffic dynamics in a single region,” J. Civ. Engginering Forum, vol. 133, no. 67, pp. 257-290, 2020.

K. Satsukawa, K. Wada, and T. Iryo, “Stochastic stability of dynamic user equilibrium in unidirectional networks : Weakly acyclic game approach R,” Transp. Res. Part B, vol. 125, no. 43, pp. 229-247, 2019.

T. Chugh, F. Bruzelius, M. Klomp, and B. Shyrokau, “An approach to develop haptic feedback control reference for steering systems using open-loop driving manoeuvres,” Veh. Syst. Dyn., vol. 11, no. 4, pp. 345-355, 2019.

H. J. U. Dewi, “Evaluation of the Effects of Floods, Overload, and Quality of Construction on Road Conditions,” Transp. J., vol. 4, no. 17, pp. 45-57, 2017.

G. Morrison, D. Cebon, G. Morrison, and D. Cebon, “Sideslip estimation for articulated heavy vehicles at the limits of adhesion,” Int. J. Veh. Mech. Mobil., vol. 54, no. 11, pp. 1601-1628, 2016.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).