Use of Bi-Polygonal Antenna Model to Explain Antenna Work Frequency Shifts Due to Changes in Antenna Geometry Shape

M. Arief Bustomi (1), Yono Hadi Pramono (2)
(1) Department of Physics, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya, 60111, Indonesia
(2) Department of Physics, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya, 60111, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Bustomi, M. Arief, and Yono Hadi Pramono. “Use of Bi-Polygonal Antenna Model to Explain Antenna Work Frequency Shifts Due to Changes in Antenna Geometry Shape”. International Journal on Advanced Science, Engineering and Information Technology, vol. 13, no. 5, Oct. 2023, pp. 1946-52, doi:10.18517/ijaseit.13.5.14378.
One way to improve the efficiency of antenna design is to use mathematical models. The polygonal antenna model is a mathematical model for designing antennas with a polygonal structure. This article explains the application of the bi-polygon antenna model to account for the frequency shift of the micro-strip antenna due to changes in the design of the antenna shape from two sides, from two hexagons to two octagons. The antenna's operating frequency is determined from the FDTD simulation results based on bi-quad, bi-hexagonal, and bi-octagonal antenna design parameters. This research aims to test the theoretical model of a bi-polygon antenna by analyzing changes in the antenna's operating frequency due to changes in the shape of the antenna design. The novelty of this research lies in applying the theoretical model of a bi-polygonal antenna to analyze changes in the antenna's operating frequency due to changes in the antenna shape design. The research results show that applying the theoretical model of a 2-polygonal antenna can explain the causes of changes in the antenna's operating frequency due to changes in geometric design from bi-quad, bi-hexagonal to bi-octagonal antennas. However, the bi-polygonal antenna model still produces different results from the simulation results. Therefore, further research is needed to improve it. Model improvements include adding factors that were previously ignored or unavailable, adding assumptions about changes in antenna capacitance, and improving modeling data based on direct measurement data of antenna parameters.

T. S. Rappaport et al., "Wireless Communications and Applications Above 100 GHz: Opportunities and Challenges for 6G and Beyond," IEEE Access, vol. 7, pp. 78729-78757, 2019.

S. Ali et al., "Analysis of downlink uplink decoupled dense heterogeneous cellular network based on user association using multi-slope path loss model," Advances in Elect. and Comp. Eng., vol. 19, no. 2, pp. 45-52, 2019.

B. Abdullah et al., "Analysis and characterization impedance of microstrip slot antenna 3 arrays double bowtiewith CPW for 2.4 GHz communication," Int. J. Acad. Research, vol. 4, no. 4, 2011.

E. R. Kusumawati et al., "The effect of various angles of V-shaped CPS on the antenna characteristics," Int. J. Microw. and Opt. Tech., vol. 11, no. 6, pp. 399-405, 2016.

A. Y. Rohedi et al., "The new Hilberg's iteration schemes of elliptic integral function for designing all of the microstrip antennas based on CPW structure," Int. J. Microw. and Opt. Tech., vol. 12, no. 4, pp. 281-290, 2017.

A. Faroqi et al., "On The Design of Array Microstrip Antenna with S-Band Frequency for Radar Communication," in The 2nd Annual Applied Science and Engineering Conference (AASEC 2017), Bandung, 2018.

S. Lim et al., "Design of a Wireless Power Transfer System to Power Wireless Sensors Remotely Using UHF," Progress In Electromagnetics Research, vol. 82, pp. 175-182, 2019.

T. Jayanthya et al., "Design and Analysis of Biquad Patch Antenna with Different Hard Substrates for UWB Applications," I. J. Wireless and Microwave Technologies, vol. 3, pp. 58-66, 2017.

Y. Cheng et al., "Design of a Multiple Band Vehicle-Mounted Antenna," International Journal of Antennas and Propagation, vol. 2019, pp. 1-11, 2019.

I. Iswadi et al., "Design and Comparative Study Among Antennas of GCS for Telemetry Communication System of UAV," International Journal of Information Technology and Electrical Engineering, vol. 3, no. 4, pp. 99-105, 2019.

M. A. Bustomi et al., "Bandwidth and Working Frequency Analysis of Bi-Hexagonal Antenna," in International Conference on Science and Applied Science (ICSAS), Solo, 2020.

N. Mahalakshmi et al., "Design of hexagon shape bow-tie patch antenna for implantable biomedical applications," Alexandria Eng. J., vol. 56, pp. 235-239, 2017.

S. Tripathi et al., "Hexagonal fractal ultra-wideband antenna using Koch geometry with bandwidth enhancement," IET Microw. Antennas Propag., vol. 8, no. 15, pp. 1445-1450, 2014.

Y. Chen et al., "A novel wideband antenna array with tightly coupled octagonal ring elements," Progress in Electromagnetics Research, vol. 124, pp. 55-70, 2012.

H. Zhu et al., "A 320 GHz octagonal shorted annular ring on-chip antenna array," IEEE Access, vol. 8, pp. 84282-84289, 2020.

S. Singhal et al., "CPW-fed octagonal super-wideband fractal antenna with defected ground structure," IET Microw. Antennas Propag., vol. 11, no. 3, pp. 370-377, 2017.

P. N. Vummadisettv et al., "Design of compact octagonal slotted hexagonal and rectangular-shaped monopole antennas for dual UWB applications," Turkish J. Elect. Eng. & Comp. Sci., vol. 24, pp. 2806-2824, 2016.

A. A. Ibrahim et al., "A printed compact band-notched antenna using octagonal radiating patch and meander slot technique for UWB applications," Progress in Electromagnetics Research, vol. 54, pp. 153-162, 2017.

A. Hossain et al., "An octagonal ring-shaped parasitic resonator-based compact ultra-wideband antenna for microwave imaging applications," Sensors, vol. 20, no. 1354, pp. 1-20, 2020.

S. Singhal et al., "CPW-fed octagonal super-wideband fractal antenna with defected ground structure," IET Microw. Antennas Propag., vol. 11, no. 3, pp. 370-377, 2017.

M. A. Bustomi et al., "The geometry effect of regular polygonal wire on its inductance for antenna application," in SNF 2019, Surabaya, 2020.

J. Annovasho et al., "Design and optimization high-performance bi-circular loop antenna with plane reflector and coaxial feed line at 2.45 GHz frequency," in 2017 International Seminar on Sensors, Instrumentation, Measurement and Metrology, Surabaya, 2017.

Y. Gong et al., "Generation and Transmission of OAM-Carrying Vortex Beams Using Circular Antenna Array," IEEE Transactions on Antennas and Propagation, 2017.

B. L. V. Kumar et al., "Design and Analysis of Circular Patch Antenna," in International Conference of Modern Applications on Information and Communication Technology 2020, Babylon-Hilla, 2021.

A. Elrashidi et al., "Input Impedance, VSWR and Return Loss of a Conformal Microstrip Printed Antenna for TM01 Mode Using Two Different Substrates," Int. J. Networks and Communic., vol. 2, no. 2, pp. 13-19, 2012.

H. W. Yang et al., "A novel DGS microstrip antenna simulated by FDTD," Elsevier - Optik, vol. 124, pp. 2277-2280, 2013.

H. T. Andhyka et al., "Design of THz high-resistivity silicon-based microstrip antenna for breast cancer imaging," Int. J. on Advanced Sci., Eng. and Inform. Tech., vol. 10, no. 6, pp. 2640-2648, 2020.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).