The Peluit Heat Utilization for Low-Rank Coal Upgrading
How to cite (IJASEIT) :
H. J. Lab, “Conceptual Design of 150MWt Pebble Bed Type High Temperature Reactor,” 2019.
Sriyono et al., “The turbine heat waste of RDE for desalination laboratory plant,” J. Phys. Conf. Ser., vol. 1772, no. 1, 2021, doi: 10.1088/1742-6596/1772/1/012036.
R. Kusumastuti, S. Sriyono, H. Tjahjono, T. Setiadipura, and M. Pancoko, “The RCCS thermal analysis during the station blackout accident of RDE,” J. Phys. Conf. Ser., vol. 1772, no. 1, 2021, doi: 10.1088/1742-6596/1772/1/012037.
M. Pancoko, A. Nugroho, D. Priambodo, and T. Setiadipura, “Design Study of a Straight Tube Bundle Steam Generator for Reaktor Daya Eksperimental,” vol. 9, no. 5, pp. 531-540, 2018.
T. Setiadipura, S. Bakhri, and G. R. Sunaryo, “Study on characteristic of temperature coefficient of reactivity for Plutonium core of Pebbled Bed Reactor,” J. Phys. Conf. Ser., vol. 962, no. 1, pp. 2-11, 2018, doi: 10.1088/1742-6596/962/1/012058.
S. Sriyono et al., “Temperature profile analysis on cryogenic activated carbon column of helium purification testing facility,” AIP Conf. Proc., vol. 2180, no. December 2019, doi: 10.1063/1.5135555.
I. D. Irianto, S. Dibyo, S. Sriyono, D. H. Salimy, R. Kusumastuti, and M. Pancoko, “Performance analysis of cogeneration energy conversion system design for RDE,” IOP Conf. Ser. Mater. Sci. Eng., vol. 830, no. 3, 2020, doi: 10.1088/1757-899X/830/3/032092.
P. Ferrí£o, J. Fournier, and O. Le, “Fueling Scheme for the Indonesian Experimental on District Heating and Cooling Power Reactor (10 MWth Pebble-Bed HTGR),” Energy Procedia, vol. 131, pp. 69-76, 2017, doi: 10.1016/j.egypro.2017.09.477.
I. D. Irianto et al., “Effect of Superheated Steam Pressure on the Performance of RDE Energy Conversion System,” J. Phys. Conf. Ser., vol. 1198, no. 2, 2019, doi: 10.1088/1742-6596/1198/2/022045.
D. H. Salimy et al., “The assessment of nuclear hydrogen cogeneration system application for steel industry,” AIP Conf. Proc., vol. 2180, no. December 2019, doi: 10.1063/1.5135547.
N. Nurhadi, M. A. Andriansyah Efendi, and S. Rianda, “The utilization of fixed bed coal gasification by-products to produce combustible gas by auto-thermal process,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 7, no. 5, pp. 1964-1969, 2017, doi: 10.18517/ijaseit.7.5.2104.
S. Djati H Salimy, “The assessment of nuclear hydrogen cogeneration system application for steel industry,” J. Phys. Conf. Ser., no. December 2019, doi: 10.1063/1.5135547.
D. Y. Miftahul Huda, “The Influence of Coal Feed Rate on the Effectivity of Coal Drying Process,” J. Teknol. Miner. dan Batubara, vol. 11, no. Im, pp. 18-28, 2015.
B. D. Afrah, B. Sajjakulnukit, and M. D. Bustan, “Product competitiveness of Upgrading Brown Coal (UBC) process in Indonesia,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 7, no. 4, pp. 1289-1295, 2017, doi: 10.18517/ijaseit.7.4.2488.
M. Faizal, “Utilization biomass and coal mixture to produce alternative solid fuel for reducing emission of greenhouse gas,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 7, no. 3, pp. 950-956, 2017, doi: 10.18517/ijaseit.7.3.2474.
J. Fan, G. Wang, and J. Zhang, “Study on spontaneous combustion tendency of coals with different metamorphic grade at low moisture content based on TPO-DSC,” Energies, vol. 12, no. 20, 2019, doi: 10.3390/en12203890.
I. Bizzy, R. Sipahutar, E. Ibrahim, and M. Faizal, “Determining of drying characteristics for South Sumatera low-rank coal using solar and laboratory scaled oven,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 7, no. 6, pp. 1998-2003, 2017, doi: 10.18517/ijaseit.7.6.2006.
D. H. Salimy and H. Sriyono Sriyono, Abdul, “The assessment of nuclear hydrogen cogeneration system (NHCS) for CO2 conversion to urea fertilizer,” Malaysian J. Fundam. Appl. Sci., vol. 16, no. 2, pp. 135-138, 2020.
G. Chen et al., “Distribution of trace elements during coal gasification : The effect of upgrading method,” J. Clean. Prod., vol. 190, no. 5, pp. 193-199, 2018, doi: 10.1016/j.jclepro.2018.04.077.
M. Pancoko, A. Nugroho, D. Priambodo, and T. Setiadipura, “Design study of a straight tube bundle steam generator for Reaktor Daya Eksperimental,” Int. J. Mech. Eng., vol. 9, no. 5, pp. 531-540, 2018.
L. Luo, F. Li, and H. Wang, “The Influence of Coal Calorific Value on Power Plant Boiler Operation,” Environ. Sci. Eng., vol. 5, no. Ese, pp. 26-30, 2017.
D. Pudasainee and R. Gupta, “Review on chemical upgrading of coal: Production processes, potential applications and recent developments,” Fuel Process. Technol., vol. 158, pp. 35-56, 2017, doi: 10.1016/j.fuproc.2016.12.010.
D. Syafrini, M. F. Nurdin, Y. S. Sugandi, and A. Miko, “Rejuvenation of the Former Coal Mining Industry Area into a Heritage Site: A Solution to Overcome the Threat of Environmental and Social Problems,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 10, no. 5, pp. 2111-2117, 2020, doi: 10.18517/ijaseit.10.5.10921.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).