DOI : https://doi.org/10.18517/ijaseit.12.2.14788

Magnesium Reduction from Thanhhoa Dolomite by Ferrosilicon and Ferro-Silicocalcium as Reducing Agent

Vu Viet Quyen (1), Vu Thi Thu Trang (2), Le Thi Huong Giang (3), Tran Duc Huy (4), Duong Ngoc Binh (5)
(1) Vietnam Maritime University, 484 Lach Tray Str., Haiphong City, Vietnam
(2) Vietnam Maritime University, 484 Lach Tray Str., Haiphong City, Vietnam
(3) Vietnam Maritime University
(4)
(5) Hanoi University of Science and Technology
Fulltext View | Download
How to cite (IJASEIT) :
Quyen, Vu Viet, et al. “Magnesium Reduction from Thanhhoa Dolomite by Ferrosilicon and Ferro-Silicocalcium As Reducing Agent”. International Journal on Advanced Science, Engineering and Information Technology, vol. 12, no. 2, Apr. 2022, pp. 712-8, doi:10.18517/ijaseit.12.2.14788.
Citation Format :
In this paper, a new reducing agent known as ferro-silicocalcium is being studied for its application in magnesium production through the Pidgeon process. Ferro-silicocalcium with main phase components CaSi2 and Si can reduce Mg from dolomite at a lower temperature than a traditional reducing agent. It thus improves the efficiency of magnesium production and solves the large energy consumption problem of the Pidgeon process. This paper presents thermodynamics calculations and experimental study on reducing magnesium from Thanhhoa dolomite with the new reducing agents known as ferro-silicocalcium and ferrosilicon as traditional reducing agents. From the thermodynamics calculations, CaSi2 in the ferro-silicocalcium can eliminate magnesium oxide at temperatures 1000°C lower than FeSi2 in ferrosilicon. This leads to a substantial decrease in the recovery temperature. When CaSi2 is decomposed, it releases silicon to improve the reduction process at temperatures greater than 1100°C. Experiments are performed to confirm the calculation results. The reduction process of dolomite by ferro-silicocalcium and ferrosilicon was analyzed by phases analysis of reduction slag through X-ray diffraction. The experimental results show that when using ferro-silicocalcium as a reducing agent, the recovering magnesium oxide efficiency reaches 91.3% over three hours with a recovering temperature of 1200°C. The efficiency is 7% higher than the traditional method using ferrosilicon under the same conditions. This proves that using ferro-silicocalcium as a reducing agent reduces the operating temperature of the reducing system and saves energy for the whole process. Therefore, ferro-silicocalium promises to be an effective alternative reducing agent in magnesium production.

N. Sezer, Z. Evis, S. M. Kayhan, A. Tahmasebifar, and M. Koí§, “Review of magnesium-based biomaterials and their applications,” J. Magnes. Alloy., vol. 6, no. 1, pp. 23-43, Mar. 2018, doi: 10.1016/j.jma.2018.02.003.

T. Xu, Y. Yang, X. Peng, J. Song, and F. Pan, “Overview of advancement and development trend on magnesium alloy,” J. Magnes. Alloy., vol. 7, no. 3, pp. 536-544, Sep. 2019, doi: 10.1016/j.jma.2019.08.001.

R. Viswanathan, S. Ramesh, and V. Subburam, “Measurement and optimization of performance characteristics in turning of Mg alloy under dry and MQL conditions,” Measurement, vol. 120, pp. 107-113, May 2018, doi: 10.1016/j.measurement.2018.02.018.

X. Li, W. Yu, J. Wang, and S. Xiong, “Influence of melt flow in the gating system on microstructure and mechanical properties of high pressure die casting AZ91D magnesium alloy,” Mater. Sci. Eng. A, vol. 736, pp. 219-227, Oct. 2018, doi: 10.1016/j.msea.2018.08.090.

E. Aghion and G. Golub, “Production Technologies of Magnesium,” in Magnesium Technology, Berlin/Heidelberg: Springer-Verlag, pp. 29-62.

F. Gao, Z. Nie, Z. Wang, X. Gong, and T. Zuo, “Life cycle assessment of primary magnesium production using the Pidgeon process in China,” Int. J. Life Cycle Assess., vol. 14, no. 5, pp. 480-489, 2009, doi: 10.1007/s11367-009-0101-9.

T. E. Norgate, S. Jahanshahi, and W. J. Rankin, “Assessing the environmental impact of metal production processes,” J. Clean. Prod., vol. 15, no. 8-9, pp. 838-848, 2007, doi: 10.1016/j.jclepro.2006.06.018.

M. S. Mahmoud and T. Yabe, “Silicothermic reduction of MgO using diode laser: Experimental and kinetic study,” J. Magnes. Alloy., vol. 5, no. 4, pp. 430-438, 2017, doi: 10.1016/j.jma.2017.10.002.

Y. Wada et al., “Smelting Magnesium Metal using a Microwave Pidgeon Method,” Sci. Rep., vol. 7, 2017, doi: 10.1038/srep46512.

Y. Tian et al., “Comparative evaluation of energy and resource consumption for vacuum carbothermal reduction and Pidgeon process used in magnesium production,” J. Magnes. Alloy., Dec. 2020, doi: 10.1016/j.jma.2020.09.024.

N. Xiong, Y. Tian, B. Yang, B. qiang Xu, T. Dai, and Y. nian Dai, “Results of recent investigations of magnesia carbothermal reduction in vacuum,” Vacuum, vol. 160. pp. 213-225, 2019, doi: 10.1016/j.vacuum.2018.11.007.

J. Peng, N. Feng, S. Chen, Y. Di, X. Wu, and W. Hu, “Experimental and thermodynamical studies of MgO reduction with calcium carbide,” Zhenkong Kexue yu Jishu Xuebao/Journal Vac. Sci. Technol., vol. 29, no. 6, pp. 637-640, 2009, doi: 10.3969/j.issn.1672-7126.2009.06.10.

Y. Tian et al., “Experimental study on the reversion reaction between magnesium and CO vapor in the carbothermic reduction of magnesia under vacuum,” in Minerals, Metals and Materials Series, 2018, vol. Part F7, pp. 165-170, doi: 10.1007/978-3-319-72332-7_25.

B. Chubukov, S. Rowe, A. Palumbo, I. Hischier, and A. Weimer, “Experimental investigation of continuous magnesium production by carbothermal reduction,” in Minerals, Metals and Materials Series, 2017, vol. Part F8, pp. 199-202, doi: 10.1007/978-3-319-52392-7_30.

D. Fu, T. Zhang, Z. Dou, and L. Guan, “A new energy-efficient and environmentally friendly process to produce magnesium,” Can. Metall. Q., vol. 56, no. 4, pp. 418-425, 2017, doi: 10.1080/00084433.2017.1361178.

H. Ma, Z. Wang, Y. Wang, and D. Wang, “Phase transformation involved in the reduction process of magnesium oxide in calcined dolomite by ferrosilicon with additive of aluminum,” Green Process. Synth., vol. 9, no. 1, pp. 164-170, 2020, doi: 10.1515/gps-2020-0017.

M. Bugdayci, A. Turan, M. Alkan, and O. Yucel, “Effect of Reductant Type on the Metallothermic Magnesium Production Process,” High Temp. Mater. Process., vol. 37, no. 1, pp. 1-8, Jan. 2018, doi: 10.1515/htmp-2016-0197.

C. W. Bale et al., “FactSage thermochemical software and databases, 2010-2016,” Calphad, vol. 54, pp. 35-53, Sep. 2016, doi: 10.1016/j.calphad.2016.05.002.

V. V. Quyen, V. T. T. Trang, N. D. Nam, T. D. Huy, and D. N. Binh, “Research on the manufacturing magnesium from thanhhoa dolomite by pidgeon process,” EUREKA, Phys. Eng., vol. 2020, no. 6, pp. 97-107, 2020, doi: 10.21303/2461-4262.2020.001383.

J. You and Y. Wang, “Reduction mechanism of Pidgeon process of magnesium metal,” Guocheng Gongcheng Xuebao/The Chinese J. Process Eng., vol. 19, no. 3, pp. 560-566, 2019, doi: 10.12034/j.issn.1009-606X.218236.

T. Zhang, “Investigation on the reaction between MgO-CaO-CaF2 and Al-C powders to extract magnesium under atmospheric pressure,” J. Magnes. Alloy., vol. 7, no. 2, pp. 328-334, 2019, doi: 10.1016/j.jma.2019.03.001.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).