Evaluating Retrofitting Strategies of Low-to-Mid-Rise Reinforced Concrete Structure Based on Its Seismic Fragility
How to cite (IJASEIT) :
V. Y. Palagala and V. Singhal, “Structural score to quantify the vulnerability for quick seismic assessment of RC framed buildings in India,” Eng. Struct., vol. 243, Sep. 2021, doi: 10.1016/J.ENGSTRUCT.2021.112659.
X. Liao, S. Zhang, Z. Cao, and X. Xiao, “Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement,” J. Build. Eng., vol. 44, p. 103219, Dec. 2021, doi: 10.1016/J.JOBE.2021.103219.
F. Rezazadeh and S. Talatahari, “Seismic energy-based design of BRB frames using multi-objective vibrating particles system optimization,” Structures, vol. 24, pp. 227-239, Apr. 2020, doi: 10.1016/J.ISTRUC.2020.01.006.
A. Rahimi and M. R. Maheri, “The effects of steel X-brace retrofitting of RC frames on the seismic performance of frames and their elements,” Eng. Struct., vol. 206, no. November 2019, 2020, doi: 10.1016/j.engstruct.2019.110149.
D. A. Pohoryles, J. Melo, T. Rossetto, H. Varum, and L. Bisby, “Seismic Retrofit Schemes with FRP for Deficient RC Beam-Column Joints: State-of-the-Art Review,” J. Compos. Constr., vol. 23, no. 4, p. 03119001, 2019, doi: 10.1061/(asce)cc.1943-5614.0000950.
H. H. Mhanna, R. A. Hawileh, and J. A. Abdalla, “Comparative analysis of design guidelines for FRP contribution to shear capacity of strengthened RC beams,” Procedia Struct. Integr., vol. 37, pp. 359-366, Jan. 2022, doi: 10.1016/J.PROSTR.2022.01.096.
M. Gotame, C. L. Franklin, M. Blomfors, J. Yang, and K. Lundgren, “Finite element analyses of FRP-strengthened concrete beams with corroded reinforcement,” Eng. Struct., vol. 257, p. 114007, Apr. 2022, doi: 10.1016/J.ENGSTRUCT.2022.114007.
S. E. Ruiz et al., “BRB retrofit of mid-rise soft-first-story RC moment-frame buildings with masonry infill in upper stories,” J. Build. Eng., vol. 38, p. 101783, 2021, doi: 10.1016/j.jobe.2020.101783.
J. A. Oviedo-Amezquita, N. Jaramillo-Santana, C. A. Blandon-Uribe, and A. M. Bernal-Zuluaga, “Development and validation of an acceptance criteria and damage index for buckling-restrained braces (BRB),” J. Build. Eng., vol. 43, Nov. 2021, doi: 10.1016/J.JOBE.2021.102534.
E. Ballinas, H. Guerrero, A. Terí¡n-Gilmore, and J. Alberto Escobar, “Seismic response comparison of an existing hospital structure rehabilitated with BRBs or conventional braces,” Eng. Struct., vol. 243, Sep. 2021, doi: 10.1016/J.ENGSTRUCT.2021.112666.
A. Seifiasl and M. Hoseinzadeh Asl, “Experimental and numerical study on the seismic behavior of steel plate shear wall with reduced web section beams,” J. Build. Eng., vol. 46, p. 103797, Apr. 2022, doi: 10.1016/J.JOBE.2021.103797.
F. Wei, H. Chen, and Y. Xie, “Experimental study on seismic behavior of reinforced concrete shear walls with low shear span ratio,” J. Build. Eng., vol. 45, p. 103602, Jan. 2022, doi: 10.1016/J.JOBE.2021.103602.
A. M. Abualreesh, A. Tuken, A. Albidah, and N. A. Siddiqui, “Reliability-based optimization of shear walls in RC shear wall-frame buildings subjected to earthquake loading,” Case Stud. Constr. Mater., vol. 16, p. e00978, Jun. 2022, doi: 10.1016/J.CSCM.2022.E00978.
J. Zhong, J. Zhang, X. Zhi, and F. Fan, “Probabilistic seismic demand and capacity models and fragility curves for reticulated structures under far-field ground motions,” Thin-Walled Struct., vol. 137, pp. 436-447, Apr. 2019, doi: 10.1016/j.tws.2019.01.032.
Y. Peng, Y. Ma, T. Huang, and D. De Domenico, “Reliability-based design optimization of adaptive sliding base isolation system for improving seismic performance of structures,” Reliab. Eng. Syst. Saf., vol. 205, p. 107167, 2021, doi: 10.1016/j.ress.2020.107167.
Y. S. Lin, R. W. K. Chan, and H. Tagawa, “Earthquake early warning-enabled smart base isolation system,” Autom. Constr., vol. 115, no. December 2019, p. 103203, 2020, doi: 10.1016/j.autcon.2020.103203.
F. F. Taucer, E. Spacone, and F. C. Filippou, “A Fiber Beam-Column Element for Seismic Response Analysis of Reinforced Concrete Structures,” Ucb/Eerc-91/17, no. December 1991, p. 138, 1991.
B. Ferracuti, M. Savoia, R. Francia, R. Pinho, and S. Antoniou, “Pushover analysis of FRP-retrofitted existing RC frame structures,” FRPRCS-8 Univ. Patras, Patras, no. June 2014, pp. 1-10, 2007.
R. Pinho, C. Casarotti, and S. Antoniou, “A comparison of single-run pushover analysis techniques for seismic assessment of bridges,” Earthq. Eng. Struct. Dyn., vol. 36, no. 10, pp. 1347-1362, 2007, doi: 10.1002/EQE.684.
M. R. Spoelstra and G. Monti, “FRP-Confined Concrete Model,” J. Compos. Constr., vol. 3, no. 3, pp. 143-150, Aug. 1999, doi: 10.1061/(ASCE)1090-0268(1999)3:3(143).
R. H. Devi, S. Sangadji, and H. A. Saifullah, “Fragility curve of low-to-mid-rise concrete frame retrofitted with FRP,” E3S Web Conf., vol. 156, 2020, doi: 10.1051/e3sconf/202015603006.
A. Zona and A. D. Asta, “Elastoplastic model for steel buckling-restrained braces,” JCSR, vol. 68, no. 1, pp. 118-125, 2012, doi: 10.1016/j.jcsr.2011.07.017.
W. M. Hassan and J. C. Reyes, “Assessment of modal pushover analysis for mid-rise concrete buildings with and without viscous dampers,” J. Build. Eng., vol. 29, p. 101103, May 2020, doi: 10.1016/J.JOBE.2019.101103.
M. Kheirollahi, K. Abedi, and M. R. Chenaghlou, “A new pushover procedure for estimating seismic demand of double-layer barrel vault roof with vertical double-layer walls,” Structures, vol. 34, pp. 1507-1524, Dec. 2021, doi: 10.1016/J.ISTRUC.2021.08.090.
M. Gholhaki, G. Pachideh, and A. Javahertarash, “Capacity spectrum of SPSW using pushover and energy method without need for calculation of target point,” Structures, vol. 26, pp. 516-523, Aug. 2020, doi: 10.1016/J.ISTRUC.2020.04.028.
A. Nettis, R. Gentile, D. Raffaele, G. Uva, and C. Galasso, “Cloud Capacity Spectrum Method: Accounting for record-to-record variability in fragility analysis using nonlinear static procedures,” Soil Dyn. Earthq. Eng., vol. 150, p. 106829, Nov. 2021, doi: 10.1016/J.SOILDYN.2021.106829.
Y. Liu, J. S. Kuang, Q. Huang, Z. Gu, and X. Wang, “Spectrum-based pushover analysis for the quick seismic demand estimation of reinforced concrete shear walls,” Structures, vol. 27, no. June, pp. 1490-1500, 2020, doi: 10.1016/j.istruc.2020.07.040.
J. Zhong, J. Zhang, X. Zhi, and F. Fan, “Thin-Walled Structures Probabilistic seismic demand and capacity models and fragility curves for reticulated structures under far- fi eld ground motions,” Thin Walled Struct., vol. 137, no. January, pp. 436-447, 2019, doi: 10.1016/j.tws.2019.01.032.
G. Andreotti and C. G. Lai, “Use of fragility curves to assess the seismic vulnerability in the risk analysis of mountain tunnels,” Tunn. Undergr. Sp. Technol., vol. 91, p. 103008, Sep. 2019, doi: 10.1016/J.TUST.2019.103008.
M. Bovo and N. Buratti, “Evaluation of the variability contribution due to epistemic uncertainty on constitutive models in the definition of fragility curves of RC frames,” Eng. Struct., vol. 188, pp. 700-716, Jun. 2019, doi: 10.1016/J.ENGSTRUCT.2019.03.064.
I. Ratna Hapsari, S. Sangadji, and S. Adi Kristiawan, “Seismic performance of four-storey masonry infilled reinforced concrete frame building,” MATEC Web Conf., vol. 195, pp. 1-14, 2018, doi: 10.1051/matecconf/201819502017.
Z. F. Virawan, S. Sangadji, and H. A. Saifullah, “Fragility curves for low-to-mid-rise concrete frame building retrofitted by shear wall-frame system,” IOP Conf. Ser. Earth Environ. Sci., vol. 871, no. 1, pp. 0-8, 2021, doi: 10.1088/1755-1315/871/1/012011.
V. Silva, H. Crowley, H. Varum, R. Pinho, and R. Sousa, “Evaluation of analytical methodologies used to derive vulnerability functions,” Earthq. Eng. Struct. Dyn., vol. 43, no. 2, pp. 181-204, 2014, doi: 10.1002/EQE.2337.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).