A Technique to Enhance Two-Node Methods as Accurate as Multi-Node Methods: A Case for Human Body Temperature Measurements

Sensus Wijonarko (1), Purwowibowo (2), Tatik Maftukhah (3), Mahmudi (4), Dadang Rustandi (5), Siddiq Wahyu Hidayat (6), Jalu Ahmad Prakosa (7), Bernadus Herdi Sirenden (8)
(1) Research Center for Photonics, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(2) Research Center for Photonics, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(3) Research Center for Photonics, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(4) Research Center for Testing Technology and Standards, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(5) Research Center for Photonics, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(6) Research Center for Testing Technology and Standards, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(7) Research Center for Photonics, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
(8) Research Center for Electronics, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
[1]
S. Wijonarko, “A Technique to Enhance Two-Node Methods as Accurate as Multi-Node Methods: A Case for Human Body Temperature Measurements ”, Int. J. Adv. Sci. Eng. Inf. Technol., vol. 15, no. 2, pp. 507–514, Apr. 2025.
A human being is categorized as a homoeothermic creature. His stable temperature is controlled using thermoregulation. Hence, his representative temperature is not objectively measured using the one-node method. Meanwhile, multi-node methods are more accurate but inefficient. This study proposed a technique to condense the multi-node (multi-point) method into the minimum number (two-node). This study was a continuation of the author's preliminary study. The human body temperature data for the preliminary study was also reused to make them more manageable for comparison with the preliminary study and to reduce sampling errors. The preliminary study used a 16-node method comprising one node for the core and 15 for skin 1. A (bridge of the nose), 2. B (upper cheek), 3. C (chest), 4. D (upper arm), 5. E (front waist.), 6. F (lower arm), 7. G (hand), 8. L (nape of the neck), 9. M (shoulder blade), 10. N (back waist), 11. H (quadriceps), 12. P (hamstring), 13. J (shinbone), 14. Q (calf), & 15. K (feet). Based on the analysis, the two-node method for this case was the node for the core (ear canal) and upper arm. These two methods were then compared using two-way ANOVA (Analysis of Variance) with Repetition. The result showed no significant difference between the 16-node in the previous study and the condensed multi-node (two-node) method in this study. However, further study should be conducted to condense other multi-node methods, especially two or three-dimensional temperature measurement methods, into the two-node method.

G. Machin et al., “Is current body temperature measurement practice fit-for-purpose?,” J. Med. Eng. Technol., vol. 45, no. 2, pp. 136–144, 2021, doi: 10.1080/03091902.2021.1873441.

G. B. Dell’Isola, E. Cosentini, L. Canale, G. Ficco, and M. Dell’Isola, “Noncontact Body Temperature Measurement: Uncertainty Evaluation and Screening Decision Rule to Prevent the Spread of COVID-19,” Sensors, vol. 21, no. 346, pp. 1–20, 2021, doi:10.3390/s21020346.

G. Mei, S. Peng, Z. Zeng, T. Liao, and Y. Huang, “The Influence of High Temperature Weather on Human Body Temperature Measurement by Infrared Thermal Imaging Thermometer,” in Journal of Physics: Conference Series 2112, IOP Publishing, 2021, pp. 1–8. doi: 10.1088/1742-6596/2112/1/012024.

S. Mazdeyasna, P. Ghassemi, and Q. Wang, “Best Practices for Body Temperature Measurement with Infrared Thermography: External Factors Affecting Accuracy,” Sensors, vol. 23, pp. 1–24, 2023, doi:10.3390/s23188011.

T. Abuzairi, N. I. Sumantri, A. Irfan, and R. Maulana Mohamad, “Infrared thermometer on the wall (ithermowall): an open source and 3-d print infrared thermometer for fever screening,” HardwareX, 2021, doi: 10.1016/j.ohx.2020.e00168 2468.

J. A. Prakosa et al., “Experimental Design of Fast Terminal Sliding Mode Control for Valve Regulation under Water Load Uncertainty for Precision Irrigation,” Actuators, vol. 12, pp. 1–13, 2023, doi:10.3390/act12040155.

B. H. Sirenden, P. Mursanto, and S. Wijonarko, “Galois Field Transformation Effect on Space-Time-Volume Velocimetry Method for Water Surface Velocity Video Analysis,” Multimed. Tools Appl., vol. 82r, pp. 12167–12189, 2023, doi: 10.1007/s11042-022-13627-z.

B. H. Sirenden, P. Mursanto, and S. Wijonarko, “Dynamic Texture Analysis Using Temporal Gray Scale Pattern Image for Water Surface Velocity Measurement,” Image Vis. Comput., vol. 137, pp. 1–19, 2023, doi: 10.1016/j.imavis.2023.104749.

S. Mosleh, M. A. Abtew, P. Bruniaux, G. Tartare, E. C. Loghin, and I. Dulgheriu, “Modeling and Simulation of Human Body Heat Transfer System Based on Air Space Values in 3D Clothing Model,” Materials (Basel)., vol. 14, pp. 1–16, 2021, doi:10.3390/ma14216675.

Y. Yu, R. de Dear, K. Chauhan, and J. Niu, “Impact of Wind Turbulence on Thermal Perception in the Urban Microclimate,” vol. 216, pp. 1–14, doi: 10.1016/j.jweia.2021.104714.

W. Weng, J. Yang, J. Wu, M. Fu, Z. He, and W. Chen, “Human Thermoregulation and Injury Evaluation in Fire Environments: A Review,” Fire Technol., vol. April, pp. 1–35, 2023, doi:10.1007/s10694-023-01411-w.

R. Lapisa, Arwizet, Krismadinata, A. Arafat, A. Saputra, and Z. Romani, “Numerical Analysis of the Roof Slope Effect on the Building Thermal Comfort and the Need for Roofing Materials in Tropical Area,” IJASEIT, vol. 12, no. 6, pp. 2556–2562, 2022, doi:10.18517/ijaseit.12.6.16283.

K. K. L. Lau and E. L. Krüger, “Proposed framework for establishing a global database for outdoor thermal comfort research,” in Applications of the Universal Thermal Climate Index UTCI in Biometeorology Latest Developments and Case Studies, E. L. Krüger, Ed., Cham, Switzerland: Springer Nature, 2021, pp. 209–224. doi:10.1007/978-3-030-76716-7_11.

S. Yan, J. Xiong, J. Kim, and R. de Dear, “Adapting the Two-Node Model to Evaluate Sleeping Thermal Environments,” Build. Environ., vol. 222, pp. 1–10, 2022, doi: 10.1016/j.buildenv.2022.109417.

J. Geng, Y. Gu, W. Weng, M. Fu, S. Shen, and R. Zhou, “A Multi-Segmented Human Bioheat Model for Asymmetric High Temperature Environments,” Int. J. Environ. Res. Public Heal., vol. 19, pp. 1–15, 2022, doi: 10.3390/ijerph192215259.

Z. Tabaie, A. Omidvar, and J. Kim, “Non-Uniform Distribution of Clothing Insulation as a Behavioral Adaptation Strategy and its Effect on Predicted Thermal Sensation in Hot and Humid Environments,” Energy Build., vol. 271, pp. 1–15, 2022, doi:10.1016/j.enbuild.2022.112310.

C. Wang, S. J. Yoo, and K. Ito, “Does Detailed Hygrothermal Transport Analysis in Respiratory Tract Affect Skin Surface Temperature Distributions by Thermoregulation Model?,” Adv. Build. Energy Res., vol. april, pp. 1–22, 2019, doi:10.1080/17512549.2019.1607776.

J. Wu, Z. Hu, Y. Gu, L. Li, and H. Zhu, “A Multi-Segmented Human Bioheat Model for Cold and Extremely Cold Exposures,” Int. J. Therm. Sci., vol. 173, pp. 1–17, 2022, doi:10.1016/j.ijthermalsci.2021.107394.

A. Jamin, W. Bosschaerts, I. Nastase, and B. Janssens, “Review of the Existing State of the Art Regarding the Use of CFD and Human Thermophysiological Models for the Vehicular Comfort Assessment,” in IOP Conf. Series: Earth and Environmental Science 664, 2021, pp. 1–10. doi: 10.1088/1755-1315/664/1/012012.

X. Ren and X. Ye, “A Novel Miniaturized Sandwich-like Sensor for Continuous Measurement of Core Body Temperature,” IEEE Sens. J., vol. 22, no. 17, pp. 16742–16749, 2022, doi:10.1109/jsen.2021.3071825.

H. Hymczak et al., “Core Temperature Measurement—Principles of Correct Measurement, Problems, and Complications,” Int. J. Environ. Res. Public Heal., vol. 18, pp. 1–8, 2021, doi:10.3390/ijerph182010606.

Q. Zhao, Z. Lian, and D. Lai, “Thermal Comfort Models and their Developments: A Review,” Energy Built Environ., vol. 2, no. 1, pp. 21–33, 2021, doi: 10.1016/j.enbenv.2020.05.007.

M. Švantner et al., “Statistical Study on Human Temperature Measurement by Infrared Thermography,” Sensors, vol. 22, pp. 1–19, 2022, doi: 10.3390/s22218395.

S. Wijonarko, T. Maftukhah, and D. Rustandi, “Effects of Methods , Genders , and Their Interaction to Human Body Temperature Measurement Results Investigated Using Our Tailor Made Infrared Thermometer and Application Program,” IJASEIT, vol. 12, no. 3, pp. 1085–1091, 2022, doi: 10.18517/ijaseit.12.3.14629.

H. Li, Z. Wang, J. Li, L. Wang, X. Kong, and M. Fan, “Study on Thermal Comfort of Interactive Cascade Ventilation Based on Body Multi-Node Thermal Demand,” Energy Build., vol. 273, pp. 1–14, 2022, doi: 10.1016/j.enbuild.2022.112404.

J. Werner, Measurement of Temperatures of the Human Body, vol. 5. Elsevier B.V., 2014. doi: 10.1016/B978-0-444-53632-7.00515-3.

C. Rommelfanger, L. Fischer, J. Frisch, and C. V. Treeck, “Linearization of Thermal Equivalent Temperature Calculation for Fast Thermal Comfort Prediction,” Energies, vol. 14, pp. 1–25, 2021, doi: 10.3390/en14185922.

Z. E. Akili, Y. Bouzidi, A. Merabtine, G. Polidori, and J. Kauffmann, “Assessment of Thermal Comfort of Frail People in a Sitting Posture Under Non-Uniform Conditions Using a Thermal Manikin,” Build. Environ., vol. 221, pp. 1–18, 2022, doi:10.1016/j.buildenv.2022.109334.

Q. Zhang, R. Xu, L. Ding, C. Zhang, X. Zheng, and J. Ni, “An Individualized Thermoregulatory Model for Calculating Human Body Thermal Response in Chemical Protective Clothing,” Int. J. Therm. Sci., vol. 182, pp. 1–12, 2022, doi:10.1016/j.ijthermalsci.2022.107780.

Z. Wu, R. Yang, X. Qian, L. Yang, and M. Lin, “A Multi-Segmented Human Bioheat Model Under Immersed Conditions,” Int. J. Therm. Sci., vol. 185, pp. 1–10, 2023, doi:10.1016/j.ijthermalsci.2022.108029.

Y. Takahashi et al., “Thermoregulation Model JOS-3 with New Open Source Code,” Energy Build., vol. 231, pp. 1–15, 2021, doi:10.1016/j.enbuild.2020.110575.

M. E. Kadri, F. D. Oliveira, C. Inard, and F. Demouge, “New Neurophysiological Human Thermal Model Based on Thermoreceptor Responses,” Int. J. Biometeorol., vol. Agustus, pp. 1–11, 2020, doi:10.1007/s00484-020-01990-1.

D. W. Hensley, A. E. Mark, J. R. Abella, G. M. Netscher, E. H. Wissler, and K. R. Diller, “50 Years of Computer Simulation of the Human Thermoregulatory System,” J. Biomech. Eng., vol. 135, pp. 1–9, 2013, doi: 10.1115/1.4023383.

A. Joshi, F. Wang, Z. Kang, B. Yang, and D. Zhao, “A Three-Dimensional Thermoregulatory Model for Predicting Human Thermophysiological Responses in Various Thermal Environments,” Build. Environ., vol. 207, pp. 1–14, 2022, doi:10.1016/j.buildenv.2021.108506.

D. Enescu, “Models and Indicators to Assess Thermal Sensation Under Steady-State and Transient Conditions,” Energies, vol. 12, no. 1–43, 2019, doi: 10.3390/en12050841.

J. Hess, A. Meister, V. R. Melnikov, and K. W. Axhausen, “Geographic Information System-Based Model of Outdoor Thermal Comfort: Case Study for Zurich,” Transp. Res. Rec., vol. 2677, no. 3, pp. 1465–1480, 2023, doi: 10.1177/03611981221125211.

G. Park et al., “Modeling Heat Transfer in Humans for Body Heat Harvesting and Personal Thermal Management,” Appl. Energy, vol. 323, pp. 1–21, 2022, doi: 10.1016/j.apenergy.2022.119609.

L. Ji, A. Laouadi, C. Shu, L. Wang, and M. A. Lacasse, “Evaluation and Improvement of the Thermoregulatory System for the Two-Node Bioheat Model,” Energy Build., vol. 249, pp. 1–14, 2021, doi:10.1016/j.enbuild.2021.111235.

L. Ji1, A. Laouadi, L. Wang, and M. A. Lacasse, “Development of a Bioheat Model for Older People Under Hot and Cold Exposures,” Build. Simul., vol. 15, no. 10, pp. 1815–1829, 2022, doi:10.1007/s12273-022-0890-3.

M. P. Castellani, T. P. Rioux, J. W. Castellani, A. W. Potter, and X. Xu, “A Geometrically Accurate 3 Dimensional Model of Human Thermoregulation for Transient Cold and Hot Environments,” Comput. Biol. Med., vol. 138, pp. 1–13, 2021, doi:10.1016/j.compbiomed.2021.104892.

Y. H. Yau, H. S. Toh, B. T. Chew, and N. N. N. Ghazali, “A Review of Human Thermal Comfort Model in Predicting Human–Environment Interaction in Non‑Uniform Environmental Conditions,” J. Therm. Anal. Calorim., vol. 147, pp. 14739–14763, 2022, doi:10.1007/s10973-022-11585-0.

H. Abdullah, A. Taa, and F. Mohammed, “Remote Patient Health Monitoring System Using Mobile and Wireless Body Area Network in Yemen,” IJASEIT, vol. 11, no. 1, pp. 43–50, 2021, doi:10.18517/ijaseit.11.1.13455.

G. Unnikrishnan et al., “A 3‑D Virtual Human Thermoregulatory Model to Predict Whole‑Body and Organ‑Specifc Heat‑Stress Responses,” Eur. J. Appl. Physiol., vol. 121, pp. 2543–2562, 2021, doi:10.1007/s00421-021-04698-1.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).