DOI : https://doi.org/10.18517/ijaseit.14.5.19959

Application of Inspection Programs for Risk Assessment by Factory Control Laws

Bunphot Tepparit (1), Nanthawan Am-Eam (2), Kulwarun Warunsin (3), Lerdlekha Sriratana (4), Waranon Kongsong (5), Boontham Harnphanich (6)
(1) a:1:{s:5:"en_US";s:69:"Department of Engineering Law and Inspection, Ramkhamhaeng University";}
(2) Department of Industrial Engineering, Faculty of Engineering, Ramkhamhaeng University, Bangkok, Thailand
(3) Department of Computer Engineering, Faculty of Engineering, Ramkhamhaeng University Bangkok, Thailand
(4) Department of Engineering Law and Inspection, Ramkhamhaeng University, Bangkok, Thailand
(5) Department of Engineering Law and Inspection, Ramkhamhaeng University, Bangkok, Thailand
(6) Department of Engineering Law and Inspection, Ramkhamhaeng University, Bangkok, Thailand
Fulltext View | Download
How to cite (IJASEIT) :
Tepparit, Bunphot, et al. “Application of Inspection Programs for Risk Assessment by Factory Control Laws”. International Journal on Advanced Science, Engineering and Information Technology, vol. 14, no. 5, Oct. 2024, pp. 1673-82, doi:10.18517/ijaseit.14.5.19959.
Citation Format :
Presently, there is still a high risk of non-compliance with the law in many factories, including cases where factories have risk control measures and have high accident statistics or complaints that come from impacts on communities and the environment at a high rate. The study aims to design and develop a factory inspection program and apply it to analyze and assess compliance risks with factory control laws. Data was collected from 50 factories to collect the risk assessment for compliance with the laws. The program's components consist of inspection to ensure compliance with factory control laws and risk assessment. The study found that the inspection processes and risk assessment compliance with the laws can be improved by using the Lean Work Improvement Principle with the Eliminate, Combine, Rearrange, and Simplify (ECRS) technique, resulting in increased efficiency at an average of 50% and for the conformity verification process by the factory control laws. Applying the factory inspection program according to the factory control laws reduced the audit time by an average of 9.17 hours (Productivity Up to 79%) from using the sample groups. This study has demonstrated the potential and benefits of using a risk assessment program in in-depth analysis for factory control. It can be used as an essential reference for future program development research. The satisfaction assessment results of the sample groups were very high. Besides, experts' comments strongly agreed to implement an inspection program after their usage, instilling confidence in its validity.

Y. Wang, H. Wei, Y. Wang, C. Peng, and J. Dai, “Chinese industrial water pollution and the prevention trends: An assessment based on environmental complaint reporting system (ECRS),” Alexandria Engineering Journal, vol. 60, no. 6, pp. 5803–5812, Dec. 2021, doi: 10.1016/j.aej.2021.04.015.

F. Manservisi et al., “Environmental complaint insights through text mining based on the driver, pressure, state, impact, and response (DPSIR) framework: Evidence from an Italian environmental agency,” Regional Sustainability, vol. 4, no. 3, pp. 261–281, Sep. 2023, doi: 10.1016/j.regsus.2023.08.002.

E. Badoozadeh, M. F. Arefi, and A. Babaei-Pouya, “Job Safety Risk Assessment in the Printing Industry using Job Safety Analysis method and offering control recommendations.”, Pakistan Journal of Medical & Health Sciences, Volume 14, pp. 1785-1789, 2021.

M. Noman, N. Mujahid, and A. Fatima, “The Assessment of Occupational Injuries of Workers in Pakistan,” Saf Health Work, vol. 12, no. 4, pp. 452–461, Dec. 2021, doi: 10.1016/j.shaw.2021.06.001.

Pu, W., Raman, A. A. A., Hamid, M. D., Gao, X., & Buthiyappan, A., “Development of comprehensive healthier process plants based on inherent safety concept,” Process Safety and Environmental Protection. Vol. 184, pp. 804-822, 2024, doi: 10.1016/j.psep.2024.02.017

J. Zielinski Nguyen Ajslev and I. Elisabeth Ejstrup Nimb, “Virtual design and construction for occupational safety and health purposes – A review on current gaps and directions for research and practice,” Safety Science, vol. 155. Elsevier B.V., Nov. 01, 2022. doi: 10.1016/j.ssci.2022.105876.

B. Tepparit and N. Am-Eam, “Design and Development of Self Declarations Program According to the Law of Factory Regulation Control,” Thai Industrial Engineering Network Journal, Volume 9 (No.1), pp.29–39, 2023. https://ph02.tci-thaijo.org/index.php/ienj/article/view/248297

R. Amor and J. Dimyadi, “The promise of automated compliance checking,” Developments in the Built Environment, vol. 5, Mar. 2021, doi: 10.1016/j.dibe.2020.100039.

Rodrigues, F., Antunes, F. and Matos, R., "Safety plugins for risks prevention through design resourcing BIM", Construction Innovation, Vol. 21 No. 2, pp. 244-258,2021, doi:10.1108/CI-12-2019-0147

L. Demirović, Š. Isaković-Kaplan, and M. Proho, “Internal Audit Risk Assessment in the Function of Fraud Detection,” Journal of Forensic Accounting Profession, vol. 1, no. 1, pp. 35–49, Jun. 2021, doi: 10.2478/jfap-2021-0003.

Pirbalouti, R. G., Behnam, B., & Dehkordi, M. K., “A risk-based approach to identify safety-critical equipment in process industries” Results in Engineering, Volume 20, 2023, doi:10.1016/j.rineng.2023.101448

S. Yuan, G. Reniers, and M. Yang, “Dynamic-risk-informed safety barrier management: An application to cost-effective barrier optimization based on data from multiple sources,” J Loss Prev Process Ind, vol. 83, Jul. 2023, doi: 10.1016/j.jlp.2023.105034.

M. T. Nugraha and F. K. Tjakrawala, “Analysis of Implementation of Internal Control based on COSO ERM Perspective (Case Study of PT JOY),” International Journal of Scientific and Research Publications, vol. 13, no. 6, pp. 146–152, Jun. 2023, doi: 10.29322/ijsrp.13.06.2023.p13821.

M. S. Ab Rahim, G. Reniers, M. Yang, and S. Bajpai, “Risk assessment methods for process safety, process security and resilience in the chemical process industry: A thorough literature review,” J Loss Prev Process Ind, vol. 88, Apr. 2024, doi: 10.1016/j.jlp.2024.105274.

M. A. Javed, F. U. Muram, S. Punnekkat, and H. Hansson, “Safe and secure platooning of Automated Guided Vehicles in Industry 4.0,” Journal of Systems Architecture, vol. 121, Dec. 2021, doi: 10.1016/j.sysarc.2021.102309.

Lu, Y., Gong, P., Tang, Y., Sun, S., & Li, Q., “BIM-integrated construction safety risk assessment at the design stage of building projects” Automation in Construction, Volume124, 2021, doi: 10.1016/j.autcon.2021.103553

K. T. Sotto, B. K. Burian, and M. E. Brindle, “Impact of the WHO Surgical Safety Checklist Relative to Its Design and Intended Use: A Systematic Review and Meta-Meta-Analysis,” Journal of the American College of Surgeons, vol. 233, no. 6. Elsevier Inc., pp. 794-809.e8, Dec. 01, 2021. doi: 10.1016/j.jamcollsurg.2021.08.692.

F. Ghasemi, A. Doosti-Irani, and H. Aghaei, “Applications, Shortcomings, and New Advances of Job Safety Analysis (JSA): Findings from a Systematic Review,” Safety and Health at Work, vol. 14, no. 2. Elsevier B.V., pp. 153–162, Jun. 01, 2023. doi: 10.1016/j.shaw.2023.03.006.

H. Wenpei, W. Xiaorui, and Z. Ling, “Research on Safety Risk Management of Aerospace Enterprises,” 2022. [Online]. Available: http://www.satursonpublishing.com/http://www.satursonpublishing.com/

Yadav, R., Yadav, V., Mittal, M.L., Jain, R. and Yadav, J., "The impact of Leagile software development on operational performance", International Journal of Lean Six Sigma, Vol. 15 No. 2, pp. 347-371,2024, doi:10.1108/IJLSS-06-2021-0111

A. Irsheid, A. Murad, M. Alnajdawi, and A. Qusef, “Information security risk management models for cloud hosted systems: A comparative study,” in Procedia Computer Science, Elsevier B.V., 2022, pp. 205–217. doi: 10.1016/j.procs.2022.08.025.

M. Palega, “Application of the job safety analysis (jsa) method to assessment occupational risk at the workplace of the laser cutter operator,” Management and Production Engineering Review, vol. 12, no. 3, pp. 40–50, Sep. 2021, doi: 10.24425/mper.2021.138529.

A. Al-Zuheri, H. S. Kaitan, I. Q. Al Saffar, and S. Al-Zubaidi, “An Evaluation of Lean Intervention Combined with Ergonomics on Enhancing Productivity and Workplace Risk Reduction: A Literature Review,” Industrial Engineering and Management Systems, vol. 22, no. 3, pp. 259–272, Sep. 2023, doi: 10.7232/iems.2023.22.3.259.

M. Chand, “Strategic assessment and mitigation of risks in sustainable manufacturing systems,” Sustainable Operations and Computers, vol. 2, pp. 206–213, Jan. 2021, doi: 10.1016/j.susoc.2021.07.004.

N. Sundararajan and R. Terkar, “Improving productivity in fastener manufacturing through the application of Lean-Kaizen principles,” Mater Today Proc, vol. 62, pp. 1169–1178, Jan. 2022, doi: 10.1016/j.matpr.2022.04.350.

L. Yu, J. Wang, and K. Liu, “Role of periostin in ECRS,” European Archives of Oto-Rhino-Laryngology, vol. 278, no. 8. Springer Science and Business Media Deutschland GmbH, pp. 2665–2672, Aug. 01, 2021. doi: 10.1007/s00405-020-06369-x. [17] N. Komleva, “Risk Management with Lean Methodology,” 2020.

A. Al-Zuheri, H. S. Kaitan, I. Q. Al Saffar, and S. Al-Zubaidi, “An Evaluation of Lean Intervention Combined with Ergonomics on Enhancing Productivity and Workplace Risk Reduction: A Literature Review,” Industrial Engineering and Management Systems, vol. 22, no. 3, pp. 259–272, Sep. 2023, doi: 10.7232/iems.2023.22.3.259.

G. Tortorella, J. Cómbita-Niño, J. Monsalvo-Buelvas, L. Vidal-Pacheco, and Z. Herrera-Fontalvo, “Design of a methodology to incorporate lean manufacturing tools in risk management, to reduce work accidents at service companies,” in Procedia Computer Science, Elsevier B.V., 2020, pp. 276–283. doi: 10.1016/j.procs.2020.10.038.

F. Ekonomi et al., “A COSO ERM integrated framework evaluation of it governance risk management Sri Yuni,” Journal of Interest: Economics, Business, and Accounting Review, pp.38-42, 2024. [Online]. Available: https://www.interest.biz.id/jurnalinterest/index.php/home/index

V. Cozzani and M. Yang, “Special issue: Process safety in times of a pandemic,” Journal of Loss Prevention in the Process Industries, vol. 76. Elsevier Ltd, May 01, 2022. doi: 10.1016/j.jlp.2022.104746.

N. V. Syreyshchikova, D. Y. Pimenov, E. N. Yaroslavova, M. K. Gupta, M. Aamir, and K. Giasin, “Managing Risks in the Improved Model of Rolling Mill Loading: A Case Study,” Journal of Risk and Financial Management, vol. 14, no. 8, Aug. 2021, doi: 10.3390/jrfm14080359.

F. Nilson and M. de Goër de Herve, “Exploring the transfer of risks,” Saf Sci, vol. 166, Oct. 2023, doi: 10.1016/j.ssci.2023.106240.

J. Crawford and M. Jabbour, “The relationship between enterprise risk management and managerial judgement in decision-making: A systematic literature review,” International Journal of Management Reviews, vol. 26, no. 1. John Wiley and Sons Inc, pp. 110–136, Jan. 01, 2024. doi: 10.1111/ijmr.12337.

A. Gajek, B. Fabiano, A. Laurent, and N. Jensen, “Process safety education of future employee 4.0 in Industry 4.0,” J Loss Prev Process Ind, vol. 75, Feb. 2022, doi: 10.1016/j.jlp.2021.104691.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).