Mechanistic Modeling of Conventional Rail Tracks to Predict the Total Permanent Deformation

Dian M Setiawan (1), Sri Atmaja P. Rosyidi (2), Aminudin Syah (3), Renandri Abdillah Rachman (4)
(1) Department of Civil Engineering, Universitas Muhammadiyah Yogyakarta, Jl. Brawijaya, Bantul, Indonesia
(2) Department of Civil Engineering, Universitas Muhammadiyah Yogyakarta, Jl. Brawijaya, Bantul, Indonesia
(3) Department of Civil Engineering, Universitas Lampung, Bandar Lampung, Lampung, Indonesia
(4) Department of Civil Engineering, Universitas Muhammadiyah Yogyakarta, Jl. Brawijaya, Bantul, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Setiawan, Dian M, et al. “Mechanistic Modeling of Conventional Rail Tracks to Predict the Total Permanent Deformation”. International Journal on Advanced Science, Engineering and Information Technology, vol. 14, no. 6, Dec. 2024, pp. 2018-23, doi:10.18517/ijaseit.14.6.20738.
A traditional ballasted railway track, characterized by its layers of ballast, sub-ballast, and subgrade, is the most viable option for Indonesia's railway system, primarily due to its cost-effectiveness and straightforward construction process. This track type must ensure a stable train route, maintaining appropriate horizontal and vertical alignment. Each component of the system is required to fulfill its designated role effectively. However, prior research has predominantly concentrated on assessing the permanent deformation of individual layers within conventional rail tracks. It has been determined that employing a linear elastic material model is inadequate for accurately representing the behavior of ballast, sub-ballast, and subgrade. The prevailing approach in existing literature involves simulating the inelastic behavior and modeling the permanent deformation of granular and soil materials in railway tracks using elastoplastic constitutive models, such as the Mohr-Coulomb and Drucker-Prager (Elastic Perfect-Plastic) models. In this context, the present study aims to evaluate the efficacy of mechanistic modeling in predicting the overall permanent deformation of conventional rail tracks, utilizing the Modified Drucker-Prager Cap model for the ballast, sub-ballast, and subgrade layers. Additionally, this research examines the contributions of each component layer to the total permanent deformation in the design of conventional rail tracks. A key finding from this investigation is that the ballast layer plays a crucial role in the permanent deformation of the conventional track, followed by the subgrade and sub-ballast layers.

D. M. Setiawan, “Application of 60/70 grade bitumen with layer variations on ballast structures,” International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 2, pp. 698-704, 2021. doi: 10.18517/ijaseit.11.2.9898.

D. M. Setiawan, “Conventional and asphaltic underlayment track performance subjected to argo jati passenger trains,” Civil and Environmental Engineering, vol. 18, no. 2, pp. 389-401, 2022. doi:10.2478/cee-2022-0036.

D. M. Setiawan, “Conventional track and asphaltic underlayment track mechanical behavior under Indonesia’s Babaranjang freight trains loading”, Eng Appl Sci Res, vol. 49, no. 5, pp. 657–668, Jul. 2022. doi:10.14456/easr.2022.64.

D. M. Setiawan, “Evaluation of Indonesia’s conventional track performance based on mechanistic approach”, International Journal of Sustainable Construction Engineering and Technology, vol. 13, no. 1, pp. 185-201, May 2022. doi:10.30880/ijscet.2022.13.01.017.

S. S. Jeon, “Roadbed behavior subjected to tilting-train loading at rail joint and continuous welded rail,” Journal of Central South University, vol. 21, pp. 2962−2969, 2014. doi: 10.1007/s11771-014-2263-2.

P. Punetha, and S. Nimbalkar, “Performance improvement of ballasted railway tracks for high-speed rail operations,” In: Barla, M., Di Donna, A., Sterpi, D. (eds) Challenges and Innovations in Geomechanics. IACMAG 2021. Lecture Notes in Civil Engineering, vol. 126, pp. 841–849, 2021. Springer, Cham. doi: 10.1007/978-3-030-64518-2_100.

J. B. Park, and Y. Lim, “Development of a settlement prediction model for upper subgrade layers of ballasted tracks,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 235, No. 7. pp. 801–814, 2021. doi:10.1177/0954409720965814.

B. Indraratna, W. Salim, and C. Rujikiatkamjorn, “Development and application of constitutive model for railway ballast,” International Workshop on Constitutive Modelling, Hong Kong, pp. 685–96, 2007.

I. Gallego, and A. López Pita, “Numerical simulation of embankment structure transition design,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 223, no. 4, pp. 331-343, 2009. doi: 10.1243/09544097JRRT234.

I. Gallego, A. Lopez Pita, E. W. Vieira Chaves, and A. M. Rivas Alvarez, “Design of embankment–structure transitions for railway infrastructure,” Proceedings of the Institution of Civil Engineer, Transport, vol. 165, no. 1, pp. 27-37, 2011. doi:10.1680/tran.8.00037.

B. Leshchinsky, and H. I. Ling, “Numerical modeling of behavior of railway ballasted structure with geocell confinement,” Geotextiles and Geomembranes, vol. 36, pp. 33-43, 2013. doi:10.1016/j.geotexmem.2012.10.006.

X, Shi, “Prediction of permanent deformation in railway track,” Ph.D. Dissertation, The University of Nottingham, United Kingdom, 2009.

J. Y. Shih, I. Grossoni, and Y. Bezin, “Settlement analysis using a generic ballasted track simulation package,” Transportation Geotechnics, vol. 20, 100249, 2019. doi:10.1016/j.trgeo.2019.100249.

D.S. Simulia. ABAQUS 6.13 User’s manual, Dassault Systems, Providence, RI, 2013.

A. Ramos, A. G. Correia, B. Indraratna, T. Ngo, R. Calcada, and P. Alves Costa, “Mechanistic-empirical permanent deformation models: laboratory testing, modelling and ranking,” Transportation Geotechnics, vol. 23, 100326, 2020. doi: 10.1016/j.trgeo.2020.100326.

M. Ba, “Correlation between resilient modulus and permanent deformation during a large scale model experiment of unbound base course,” In: Tran-Nguyen, HH., Wong, H., Ragueneau, F., Ha-Minh, C. (eds) Proceedings of the 4th Congrès International de Géotechnique - Ouvrages -Structures. CIGOS 2017. Lecture Notes in Civil Engineering, vol. 8. Springer, Singapore, 2018. doi: 10.1007/978-981-10-6713-637.

S. F. Brown, and E. T. Selig, “The design of pavement and rail track foundations,” Chapter 6 in Cyclic Loading of Soils: from Theory to Design. Blackie, Glasgow and London, pp. 249-305, 1991.

H. Grabe, F. J. Shaw, and C. Claytom, “Deformation measurement on a heavy haul track formation,” Conference: 8th International Heavy Haul Conference, Rio de Janeiro, Brazil, 2005.

S. H. Lee, H. V. Vo, and D. W. Park, “Investigation of asphalt track behavior under cyclic loading: full-scale testing and numerical simulation,” Journal of Testing and Evaluation, vol. 46, no. 3, pp. 934-942, 2018. doi: 10.1520/JTE20160554.

I. Grossoni, W. Powrie, A. Zervos, Y. Bezin, and L. Le Pen, “Modelling railway ballasted track settlement in vehicle-track interaction analysis,” Transportation Geotechnics, vol. 26, 100433, 2018. doi: 10.1016/j.trgeo.2020.100433.

T. Abadi, L. Le Pen, A. Zervos, and W. Powrie, Proc IMechE Part F: J Rail and Rapid Transit, vol. 232, no. 2, pp. 337-355, 2018. doi:10.1177/0954409716671545.

E. Yang, K. C. P. Wang, Y. Qiu, and Q. Luo, “Asphalt concrete for high-speed railway infrastructure and performance comparisons,” Journal of Materials in Civil Engineering, vol. 28, no. 5, 04015202, 2016. doi: 10.1061/(ASCE)MT.1943-5533.0001495.

Aingaran, S, “Experimental investigation of static and cyclic behaviour of scaled railway ballast and the effect of stress reversal,” Ph.D. Thesis, University of Southampton, United Kingdom, 2014.

Leshchinsky, B., and Ling, H, “Effects of geocell confinement on strength and deformation behavior of gravel,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 139, no. 2, pp. 340-352, 2013b. doi:10.1061/(ASCE)GT.1943-5606.0000757.

A. Gomes Correia, and A. A. Ramos, “Geomechanics classification for the rating of railroad subgrade performance,” Railway Engineering Science, vol. 30, pp. 323-359, 2021. doi:10.1007/s40534-021-00260-z.

M. V. Schulz-Poblete, P. J. Grabe, and S. W. Jacobsz, “The influence of soil suctions on the deformation characteristics of railway formation materials,” Transportation Geotechnics, vol. 18, pp. 111–123, 2019. doi: 10.1016/j.trgeo.2018.11.006.

X. Zhang, M. Burrow, and S. Zhou, “An investigation of subgrade differential settlement on the dynamic response of the vehicle–track system,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 230, no. 7, pp. 1760–1773, 2016. doi:10.1177/0954409715613538.

S. Sunaryo, L. O. M. Magribi, M. Simatupang, A. A. Putra, and M. T. Azakin, “Design of analysis railroad structure loads on passenger trains using hand method,” International Journal of Scientific & Engineering Research, vol. 11, no. 4, pp. 167–178, 2020.

J. Kennedy, P. K. Woodward, G. Medero, and M. Banimahd, “Reducing railway track settlement using three-dimensional polyurethane polymer reinforcement of the ballast,” Construction and Building Materials, vol. 44, pp. 615-625, 2013. doi:10.1016/j.conbuildmat.2013.03.002.

D. M. Setiawan, S. A. P. Rosyidi, N. A. Imron, N. A. Aprilia, B. Drajat, R. S. Arifan, W. N. Galihajiningtresna, and S. A. Ghani, “Performance analysis of subgrade in asphaltic rail track design and Indonesia’s existing ballasted track,” Journal of the Mechanical Behavior of Materials, vol. 32, 20220270, 2023. doi:10.1515/jmbm-2022-0270.

Sarana Gerbong (Title in English: Rolling Stock). PT. Kereta Api Indonesia. https://cargo.kai.id/produk/sarana. Accessed December 31, 2021.

C. Zhang and G. Jiang, “Full-scale model testing of the dynamic response of lime-stabilized weathered red mudstone subgrade under railway excitation,” Soil Dynamics and Earthquake Engineering, vol. 130, p. 105999, Mar. 2020, doi: 10.1016/j.soildyn.2019.105999.

T. Abadi, L. L. Pen, A. Zervos, and W. A. Powrie, “Review and evaluation of ballast settlement models using results from the southampton railway testing facility (SRTF),” Procedia Engineering vol. 143, pp. 999-1006, 2016. doi:10.1016/j.proeng.2016.06.089.

D. Ionescu, B. Indraratna, and H. D. Christie, “Behaviour of railway ballast under dynamic loads,” Proc. 13th Southeast Asian Geotechnical Conference. Taipei. pp. 69-74, 1998.

S. F. Brown, B. V. Brodrick, N. H. Thom, and G. R. McDowell, “The Nottingham railway test facility, UK,” Proceedings of the Institution of Civil Engineers - Transport, vol. 160, no. 2, pp. 59–65, May 2007, doi: 10.1680/tran.2007.160.2.59.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).