Antibacterial Inactivation of Escherichia coli after TiO2-Fe3O4-Bentonite Photocatalytic Treatment
How to cite (IJASEIT) :
The United Nations World Water Development Report, Water, and energy, 2014.
K. Ubonchonlakate, L. Sikonga, F. Saito, “Photocatalytic disinfection of P. aeruginosa bacterial Ag-doped TiO2 film,”. Procedia Engineering, vol. 32, pp. 656-662, 2012
X.Z. Li, H. Liu, L.F. Cheng, H.J. Tong, “ Photocatalytic oxidation using a new catalyst TiO2 microsphere for water and wastewater treatment,” Environ. Sci. Technol. Vol. 37, pp. 3989-3994, 2003
H. Oveisi, S. Rahighi, X. Jiang, Y. Nemoto, A. Beitollahi, S. Wakatsuki, Y. Yamauchi, “Unusual antibacterial property of mesoporous titania films: drastic improvement by controlling surface area and crystallinity,” Chem. Asian J., vol. 5, pp. 1978-1983, 2010
M. Pelaez, N.T., Nolan, S.C., Pillai, M.K. Seery, P. Falaras, A.G. Kontos, P.S.M. Dunlop, J.W.J., Hamilton, J.A. Byrne, K. O'Shea, M.H., Entezari,D.D. Dionysiou, “A review on the visible light active titanium dioxide photocatalysts for environmental Applications.” Appl. Catal. B: Environ. Vol. 125, pp. 331-349, 2012
J. Zhao, X. Yang, “Photocatalytic oxidation for indoor air purification: a literature review,” Build. Environ. vol. 38, pp. 645-654, 2003
R.K. Widi, A. Budhyantoro, E. Savitri, “Use of TiO2-Fe3O4 pillared bentonite as photocatalyst in photodegradation of basic blue,” Journal of Chemical and Pharmaceutical Research, vol. 7, pp. 183-187, 2015
R.K. Widi, A. Budhyantoro, “Catalytic performance of TiO2-Fe3O4 supported bentonite for photocatalytic degradation of phenol,” International Journal of Applied Engineering Research, 2014
E. Savitri, R.K. Widi, A. Budhyantoro, “The effect of the calcinations temperature during synthesis of TiO2-Fe3O4-bentonite as photocatalyst material,” Journal of Chemical and Pharmaceutical Research, 2015
M. Hasmaliza, H. S. Fooa and K. Mohd, “Anatase as Antibacterial Material in Ceramic Tiles,” Procedia Chemistry, vol. 19, pp. 828 - 834, 2016
M. Cho, H. Chung, W. Choi, J. Yoon, “Different inactivation behaviors of MS-2 phage and Escherichia coli in TiO2 photocatalytic disinfection,” Appl. Environ. Microbiol. Vol. 71, pp. 270-275, 2005
A.G. Rincón, C. Pulgarin, C. “Effect of pH, inorganic ions, organic matter and H2O2 on E. coli K12 photocatalytic inactivation by TiO2: implications in solar water disinfection,” Appl. Catal. B: Environ. Vol. 51, pp. 283-302. 2004
C. Maneerat, Y. Hayata, “Antifungal activity of TiO2 photocatalysis against Penicillium expansum in vitro and in fruit tests,” Int. J. Food Microbiol. Vol. 107, pp. 99-103. 2006
J.R. Peller, R.L. Whitman, S. Griffith, P. Harris, C. Peller, J. Scalzitti, “TiO2 as a photocatalyst for control of the aquatic invasive alga, Cladophora, under natural and artificial light,” J. Photochem. Photobiol. A: Chem. Vol. 186, pp. 212-217. 2007
V. Aruoja, S. Pokhrel, M. Sihtmae, M. Mortimer, L. Madler, A. Kahru, “Toxicity of metal-based nanoparticles to algae, bacteria and protozoa, Environ. Sci. Nano,” vol. 2, pp. 630-644, 2005
T. Hirai, K. Suzuki, I. Komasawa, “Preparation and photocatalytic properties of composite CdS nanoparticles-titanium dioxide particles,” J. Colloid Interface Sci. Vol. 244, pp. 262-265. 2001
A.L. Stepanov, “Applications of ion implantation for modification of TiO2: a review,” Rev.Adv.Mater. Sci. Vol. 30, pp. 150-165. 2012
T. Ihara, M. Miyoshi, M. Ando, S. Sugihara, Y. Iriyama, “Preparation of a visible light-active TiO2 photocatalyst by RF plasma treatment, “ J. Mater. Sci. Vol. 36, pp. 4201-4207, 2001
C. Di Valentin, G. Pacchioni, “ Trends in non-metal doping of anatase TiO2: B, C, N, and F,” Catal. Today. Vol. 206, pp. 12-18., 2013
C.Y., Lee, J.T. Hupp, J.T. “Dye-sensitized solar cells: TiO2 sensitization with a bodipyporphyrin antenna system,” Langmuir. Vol. 26 (5), pp. 3760-3765, 2010
J. Schneider, M. Matsuoka, M. Takeuchi, J. Zhang, Y. Horiuchi, M. Anpo, D.W. Bahnemann, Chem. Rev. Vol. 114, pp. 9919-9986, 2014
P.L. Hariani, “Synthesis and Properties of Fe3O4 Nanoparticles by Co-precipitation Method to Removal Procion Dye,” International Journal of Environmental Science and Development, vol. 4, pp. 33-37, 2013
K. Thamaphat, et al., “Characterization of TiO2 Powder by XRD and TEM”, Kasetsart J., vol. 42, pp 358-359, 2008
Boutra, B. dan Trari, M. 2016. Solar photodegradation of a textile azo dye using synthesized ZnO/Bentonite. Water Science and Technology, 5, 1211-1220.
Cai, Y., Stromme, M., dan Welch, K. 2013. Photocatalytic antibacterial effects are maintained on resin-based TiO2 nanocomposite after cessation of UV irradiation. PLoS ONE.
Chen, D., Tang, Q., Li, X., Zhou, X., Zang, J., Xue, W. Q., Xiang, J.Y., dan Guo, C. Q. 2012. Biocompatibility of magnetic Fe3O4 nanoparticles and their cytotoxic effect on MCF-7 cells. International Journal Nanomedicine.
Rahma Hendili , Abir Alatrache, Mossadok Ben-Attia, Marie-No€elle Pons Antibacterial inactivation of spiramycin after titanium dioxide photocatalytic treatment, C. R. Chimie 20 (2017) 710 - 716
S. Helali et al., “Solar photocatalysis: A green technology for E. coli contaminated water disinfection. Effect of concentration and different types of suspended catalyst,” J. Photochem. Photobiol. A Chem., vol. 276, pp. 31-40, 2014.
M. N. Chong, B. Jin, C. W. K. Chow, and C. Saint, “Recent developments in photocatalytic water treatment technology: a review,” Water Res., vol. 44, no. 10, pp. 2997-3027, 2010.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).