Microstructure Analysis of Hydroxyapatite Coating on Stainless Steel 316L Using Investment Casting Technique for Implant Application
How to cite (IJASEIT) :
Republika. 2013. “Indonesia Urutan Pertama Peningkatan Kecelakaan Lalu Lintas”. www.republika.co.id/berita/nasional/umum/4/11/06/nem9nc-indonesia-urutan-pertama-peningkatan-kecelakaan-lalu-lintas. Accesed february 25th 2016.
Merdeka. 2015. “Hingga September 2015, ada 23 Ribu kasus kecelakaan di Indonesia. http://www.merdeka.com/otomotif/hingga-september-2015-ada-23-ribu-kasus-kecelakaan-di-indonesia.html. Accesed April 25th 2016.
Indonesia Ministry of Health. Data dan Kondisi Penyakit Osteoporosis di Indonesia. Pusat Data dan Informasi. Jakarta Selatan. 2015.
C. Oldani and A. Dominguez, Titanium as a Biomaterial for Implants, Recent Advances in Arthroplasty, Dr. Samo Fokter (Ed.), ISBN: 978-953-307-990-5, InTech. 2012.
R.N. Patel, P.P. Gohil, “A Review on Biomaterials: Scope, Applications & Human Anatomy Significance,” International Journal of Emerging Technology and Advanced Engineering. 2012.
R. Bosco, J. V. D. Beucken, S. Leeuwenburg, and J. Jansen, “Surface Engineering for Bone Implants: A Trend from Passive to Active Surfaces,” Coating, vol. 2, pp: 95-119. 2012.
A. Ajiz, Gunawarman, J. Affi, “The Effects of Short Time Solution Treatment and Short-Time Aging on Mechanical Properties of Ti-6Al-4V for Orthopaedic Applications,” International Journal on Advance Science Engineering Informational Technology, vol. 5, no. 4. 2015.
S. Suresh, M. A. Jamil, S. Sulaiman, M. R. M. Shokor, “Optimization of Electrode Material for EDM Die-sinking of Titanium Alloy Grade 5 - Ti6Al4V,” International Journal on Advance Science Engineering Informational Technology, vol. 6, no. 4. 2016.
D. Williams, An Introduction to Medical and Dental Materials. Concise Encyclopedia of Medical & Dental Materials. Pergamon Press and The MIT Press. 1990.
M. H. Fathi, M. Meratian, H. Minouei, “Surface Bioactivation of Cobalt-base Alloy during Investment Casting Process,” Shiraz Univ Dent J, vol. 11 (2), pp: 109-116. 2010.
H. Aoki, Science and Medical Applications of Hydroxyapatite. Tokyo: JAAS. 1991.
M. Svehla, P. Morberg, W. Bruce, B. Zicat, W. R. Walsh, “The Effect of Substrate Roughness and Hydroxyapatite Coating Thickness on Implant Shear Strenght,” J. Arthroplasty, vol. 17 (3), pp 304-311. 2002.
M. Mhaede, A. Ahmed, M. Wollman, L. Wagner, “Evaluating The Effect of Hydroxyapatite Coating on The Corrosion Behavior of Severely Deformed 316 Ti SS for Surgical Implants,” Mater Sci Eng C Mater Biol Appl, vol. 50, pp 24-30. 2015
R. Z. LeGeroz and J. P. LeGeroz, Hydroxyapatite Chapter 16, (ed. T. Kokubo), vol. 1, pp 367-394, Cambridge England, Woodhead Publishing Limited and CRC Press LLC. 2008.
D. Shi, Introduction to Biomaterials, (ed. D. Shi), China and Singapore, Tsinghua University Press and World Scientific Publishing Co. Pte. Ltd. 2006.
A. Arafat, M. H. Idris, M. R. Abdul Kadir, and H. Jafari, “Characterisation of Calcium Phosphat Coating on Investment Cast 316L Stainless Steel,” Material Research Innovations, vol. 14 SUPPL 12. 2014.
J. M. Almanza, J. C. Escobedo, J. C. Ortiz, D. A. Ortiz, “Bioactivation of a Cobalt Alloy by Coating with Wollastonite durign Investment Casting,” Journal of Biomedical Research Part A. DOI: 10.1002/jbm.a.30727. 2006.
J. C. Escobedo, J. C. Ortiz, J. M. Almanza, D. A. Cortes, “Hydroxyapatite Coating on a Cobalt Base Alloy by Invesment Casting,” Scripta Materialia, 54 pp. 1611-1615. 2006.
B. Parimal, Coating Implants. Omtech. Orchid Orthopedics Solution. 2014.
H. Minouei, M. Meratian, M. H. Fathi, H. Ghazvinizadeh, “Biphasic calcium phosphat coating on cobalt-base surgical alloy during investment casting,” J Mater Sci: Mater Med, vol. 22, pp: 2449-2455. 2011.
J. W. Boretos, M. Eden, Contemporary Biomaterials, Material and Host Response, Clinical Applications, New Technology and Legal Aspects, Noyes Publications, NJ. 1984.
M. Saini, Y, Singh, “Implant Biomaterials : A Comprehensive Review,” World Journal of Clinical Cases. 2014.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).