Bond Behavior between Embedded Through-Section Bars and Concrete
How to cite (IJASEIT) :
O. Chaallal, A. Mofidi, B. Benmokrane, and K. Neale, “Embedded through-section FRP rod method for shear strengthening of RC beams: Performance and comparison with existing techniques,” Journal of Composites for Construction, vol. 15, pp. 374-383, Mar. 2011.
A. Mofidi, O. Chaallal, B. Benmokrane, and K. Neale, “Experimental tests and design model for RC beams strengthened in shear using the embedded through-section FRP method,” Journal of Composites for Construction, vol. 16, pp. 540-550, May 2012.
M. Breveglieri, A. Aprile, and J. A. O. Barros, “Shear strengthening of reinforced concrete beams strengthened using embedded through section steel bars,” Engineering Structures, vol. 81, pp. 76-87, Oct. 2014.
M. Breveglieri, A. Aprile, and J. A. O. Barros, “Embedded through-section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups,” Composite Structures, vol. 126, pp. 101-113, Feb. 2015.
A. Godat, O. Chaallal, and K. Neale, “Nonlinear finite element models for the embedded through-section FRP shear-strengthening method,” Computures & Structures, vol. 119, pp. 12-22, Jan. 2013.
J. Barros, M. Breveglieri, A. V. Gouveia, G. Dalfre, and A. Aprile, “Model to simulate the behaviour of RC beam shear strengthened by ETS bars,” [Online], Available: http://hdl.handle.net/1822/26277, 2013.
A. Godat, A. L’Hady, O. Chaallal, and K. Neale, “Bond behavior of the ETS FRP bar shear - strengthening method,” Journal of Composites for Construction, vol. 16, pp. 529-539, May 2012.
ANSYS - Release Version 15.0, "A finite element computer software and user manual for nonlinear structural analysis," Canonsburg, USA, 2013.
R. A. Hawileh, "Finite element modeling of reinforced concrete beams with a hybrid combination of steel and aramid reinforcement," Materials & Design, vol. 65, pp. 831-839, Oct. 2015.
E. Cosenza, G. Manfredi, and R. Realfonzo, “Behavior and modeling of bond of FRP rebars to concrete,” Journal of Composites for Construction, vol. 1, pp. 40-51, Feb. 1997.
L. V. H. Bui, B. Stitmannaithum, and T. Ueda, "Mechanical performances of concrete beams with hybrid usage of steel and FRP tension reinforcement," Computers and Concrete, vol. 20, pp. 391-407, Oct. 2017.
M. B. Munov, “Study on behaviour of FRP and concrete,” Ph.D. thesis, the University of Girona, 2010. [Online]. Available: http://hdl.handle.net/10803/7771.
M. M. Altaee, “Effect of CFRP plate location on flexural behavior of RC beam strengthened with CFRP plate,” International Journal on Advanced Science, Engineering and Information Technology, vol. 1, pp. 576-581, Jan. 2011.
M. M. A. Kadhim, “Nonlinear FE analysis of reinforced H.S. concrete continuous beam strengthened with CFRP sheet,” International Journal on Advanced Science, Engineering and Information Technology, vol. 1, pp. 597-601, Jan. 2011.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).