DOI : https://doi.org/10.18517/ijaseit.6.1.673

Development of Green Banana (Musa paradisiaca) as Potential Food Packaging Films and Coatings

Nur Hanani Z. A. (1), Abdullah S (2)
(1) Department of Food Technology, Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor, Malaysia
(2) Department of Food Technology, Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor, Malaysia
Fulltext View | Download
How to cite (IJASEIT) :
Z. A., Nur Hanani, and Abdullah S. “Development of Green Banana (Musa Paradisiaca) As Potential Food Packaging Films and Coatings”. International Journal on Advanced Science, Engineering and Information Technology, vol. 6, no. 1, Feb. 2016, pp. 88-91, doi:10.18517/ijaseit.6.1.673.
Citation Format :
The aim of this study was to develop biodegradable packaging films based on a unripe green banana (Musa paradisiaca L.) with different plasticizers; glycerol, polyethylene glycol (PEG) and sorbitol at various concentrations (10-50%). Banana films were produced by using casting method and physical properties of these films were determined. Banana films with 10% of PEG showed the lowest water solubility (P≤0.05) followed by films with glycerol and sorbitol. Banana films with 40% plasticizers possessed the lowest water vapor permeability (WVP) whereas films with 30% glycerol exhibited higher values of tensile strength (P≤0.05) compared to films with PEG and sorbitol. However, types of plasticizers did not influence the thickness of the films. Also, used of higher concentrations of plasticizers had increased the solubility values. These findings reveal that concentrations and types of plasticizers have significant roles to provide banana film or coating with good physical properties. The aim of this study was to develop biodegradable packaging films based on a unripe green banana (Musa paradisiaca L.) with different plasticizers; glycerol, polyethylene glycol (PEG) and sorbitol at various concentrations (10-50%). Banana films were produced by using casting method and physical properties of these films were determined. Banana films with 10% of PEG showed the lowest water solubility (P≤0.05) followed by films with glycerol and sorbitol. Banana films with 40% plasticizers possessed the lowest water vapour permeability (WVP) whereas films with 30% glycerol exhibited higher values of tensile strength (P≤0.05) compared to films with PEG and sorbitol. However, types of plasticizers did not influence the thickness of the films. Also, used of higher concentrations of plasticizers had increased the solubility values. These findings reveal that concentrations and types of plasticizers have significant roles to provide banana film or coating with good physical properties. 

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).