Real-Time Implementation of Starting Current Limitation Method for Cereals Milling Systems Using dSPACE R&D Controller Board
How to cite (IJASEIT) :
A. Pí©rez-bonilla, M. Frikha, R. P. Lí¡zaro, and G. G. Mateos, “Type of grinding of the main cereal of the diet affects production of brown egg-laying hens,” vol. 194, pp. 121-130, 2014.
I. Aprodu and I. Banu, “Milling, functional and thermo-mechanical properties of wheat , rye, triticale, barley and oat,” J. Cereal Sci., vol. 77, pp. 42-48, 2017.
C. Verucchi, C. Ruschetti, E. Giraldo, G. Bossio, and J. Bossio, “Efficiency optimization in small induction motors using magnetic slot wedges,” Electr. Power Syst. Res., vol. 152, pp. 1-8, Nov. 2017.
A. Narendra, N. V. Naik, A. K. Panda, and N. Tiwary, “A Comprehensive Review of PV Driven Electrical Motors,” Sol. Energy, vol. 195, no. 2018, pp. 278-303, 2020.
L. Alberto et al., “Performance estimation of three-phase induction motors from no-load startup test without speed acquisition,” ISA Trans., vol. 96, pp. 376-389, 2020.
M. B. Payí¡n et al., “Techno-economic optimal power rating of induction motors,” Appl. Energy, vol. 240, pp. 1031-1048, 2019.
A. A. M. Faizal and P. Subburaj, “Intelligence Based Soft Starting Scheme for the Three Phase Squirrel Cage Induction Motor with Extinction Angle AC Voltage Controller,” Circuits Syst., vol. 7, no. July, pp. 2752-2770, 2016.
M. Jannati et al., “A review on Variable Speed Control techniques for efficient control of Single-Phase Induction Motors: Evolution, classification, comparison,” Renew. Sustain. Energy Rev., vol. 75, pp. 1306-1319, 2017.
M. Akbaba, “A novel simple method for elimination of DOL starting transient torque pulsations of three-phase induction motors,” Eng. Sci. Technol. an Int. J., no. (In Press, Corrected Proof), 2020.
A. G. Arun Tomar, “Starting Time Calculation for Induction Motor,” J. Electr. Electron. Syst., vol. 04, no. 02, pp. 2-5, 2015.
A. Satpute, S. Tambe, V. Shinde, and P. Mone, “Soft starting of three phase induction motor,” Int. J. Res. Trends Innov., vol. 2, no. 5, pp. 4-5, 2017.
J. Chen, J. Li, and R. Qu, “A Restart Strategy of a Rotating Induction Machine for Inrush Current Elimination,” IEEE Trans. Ind. Appl. (Early Access ), 2020.
S. Pandey, S. Bahadure, K. Kanakgiri, and N. M. Singh, “Two-phase soft start control of three-phase induction motor,” in 2016 IEEE 6th International Conference on Power Systems, 2016.
M. Habyarimana and D. G. Dorrell, “Methods to Reduce the Starting Current of an Induction Motor,” 2017 IEEE Int. Conf. Power, Control. Signals Instrum. Eng., pp. 34-38, 2017.
A. Trianni, E. Cagno, and D. Accordini, “Energy efficiency measures in electric motors systems : A novel classification highlighting specific implications in their adoption,” Appl. Energy, vol. 252, p. 113481, 2019.
K. Sinan, O. Tolga, and O. Yuksel, “Design and implementation of based asynchronous motor voltage / frequency speed control circuit for the ventilation systems of vehicles,” Meas. Control, vol. 52, no. 7-8, pp. 1039-1047, 2019.
M. E Abid, “Adjustable Speed Drive of Asynchronous Machine Using Volt / Hz & PI Technique,” 2018 IEEE Int. Students’ Conf. Electr. Electron. Comput. Sci., pp. 1-5, 2018.
F. Wang, Z. Zhang, X. Mei, J. Rodríguez, and R. Kennel, “Advanced control strategies of induction machine: Field oriented control, direct torque control and model predictive control,” Energies, vol. 11, no. 1, pp. 1-13, 2018.
A. Hmidet and B. Olfa, “Real-Time Low-Cost Speed Monitoring and Control of Three-Phase Induction Motor via a Voltage/Frequency,” Math. Probl. Eng., no. ID 6913813, 2020.
M. Diop, W. Khiari, L. Thiaw, M. Turki, and J. Belhadj, “Characterization and control of a craft mill driven by induction motor fed by photovoltaic mini-grid,” Proc. Int. Conf. Recent Adv. Electr. Syst. Tunis., pp. 119-124, 2016.
A. Nouri, I. Salhi, E. Elwarraki, S. El Beid, and N. Essounbouli, “DSP-based implementation of a self-tuning fuzzy controller for three-level boost converter,” Electr. Power Syst. Res., vol. 146, pp. 286-297, 2017.
E. Mourabit et al., “Implementation and validation of backstepping control for PMSG wind turbine using dSPACE controller board,” Energy Reports, vol. 5, pp. 807-821, 2019.
S. Mensou et al., “Dspace DS1104 Implementation of a Robust Nonlinear Controller Applied for DFIG Driven by Wind Turbine,” Renew. Energy, vol. 147, no. Part 1, pp. 1759-1771, 2019.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).