Effect of Rare Earth on M7C3 Eutectic Carbide in 13% Chromium Alloy Cast Iron
How to cite (IJASEIT) :
X. D. Pham, A. T. Hoang, and D. N. Nguyen, “A Study on the Effect of the Change of Tempering Temperature on the Microstructure Transformation of Cu-Ni-Sn Alloy,” Int. J. Mech. Mechatronics Eng., vol. 18, no. 04, pp. 27-34, 2018.
X. D. Pham, A. T. Hoang, D. N. Nguyen, and V. V Le, “Effect of Factors on the Hydrogen Composition in the Carburizing Process,” Int. J. Appl. Eng. Res., vol. 12, no. 19, pp. 8238-8244, 2017.
A. T. Hoang, V. V. Le, D. N. Nguyen, and A. X. Nguyen, “A study of the changes in microstructure and mechanical properties of multi-pass welding between 316 stainless steel and low carbon steel,” J. Adv. Manuf. Technol., vol. 12, no. 2, pp. 23-35, 2018.
T. N. Le, M. K. Pham, A. T. Hoang, and D. N. Nguyen, “Microstructures and elements distribution in the transition zone of carbon steel and stainless steel welds,” J. Mech. Eng. Res. Dev., vol. 41, no. 3, pp. 27-31, 2018.
D. N. N. Anh Tuan Hoang, Thi Thanh Van Tran, Van Bach Nguyen, “Effect of heat treatment process on the microstructure and mechanical properties of the spray coating Ni-Cr on CT38 steel,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 9, no. 2, 2019.
B. L. Bramfitt, “Planar lattice disregistry theory and its application on heterogistry nuclei of metal,” Met. Trans, vol. 1, no. 7, pp. 1987-1995, 1970.
Y. Jian et al., “Effect of RE oxide on growth dynamics of primary austenite grain in hardfacing layer of medium-high carbon steel,” J. Rare Earths, vol. 30, no. 8, pp. 814-819, 2012.
S. G. Liu et al., “Application of quenching-partitioning-tempering process and modification to a newly designed ultrahigh carbon steel,” Mater. Des. vol. 56, pp. 37-43, 2014.
M. Filipovic and E. Romhanji, “Strain hardening of austenite in Fe-Cr-C-V alloys under the repeated impact,” Wear, vol. 270, no. 11-12, pp. 800-805, 2011.
M. K. Pham, D. N. Nguyen, and A. T. Hoang, “Influence of Vanadium Content on the Microstructure and Mechanical Properties of High-Manganese Steel,” Int. J. Mech. Mechatronics Eng., vol. 18, no. 2, pp. 141-147, 2018.
A. Bedolla-Jacuinde, S. L. Aguilar, and B. Hernandez, “Eutectic modification in a low-chromium white cast iron by a mixture of titanium, rare earth, and bismuth: I. Effect on microstructure,” J. Mater. Eng. Perform. vol. 14, no. 2, pp. 149-157, 2005.
J. Wang et al., “Influence of secondary carbides precipitation and transformation on hardening behavior of a 15 Cr-1 Mo-1.5 V white iron,” Mater. Charact., vol. 55, no. 3, pp. 234-240, 2005.
P. P. Hellstí©n, J. M. Salminen, K. S. Jí¸rgensen, and T. H. Nystí©n, “Use of potassium formate in road winter deicing can reduce groundwater deterioration,” Environ. Sci. Technol., vol. 39, no. 13, pp. 5095-5100, 2005.
X. Wu, J. Xing, H. Fu, and X. Zhi, “Effect of titanium on the morphology of primary M7C3 carbides in hypereutectic high chromium white iron,” Mater. Sci. Eng. A, vol. 457, no. 1-2, pp. 180-185, 2007.
A. Bedolla-Jacuinde, R. Correa, J. G. Quezada, and C. Maldonado, “Effect of titanium on the as-cast microstructure of a 16% chromium white iron,” Mater. Sci. Eng. A, vol. 398, no. 1-2, pp. 297-308, 2005.
A. Bedolla-Jacuinde, B. Herní¡ndez, and L. Bí©jar-Gómez, “SEM study on the M7C3 carbide nucleation during eutectic solidification of high-chromium white irons,” Zeitschrift fí¼r Met., vol. 96, no. 12, pp. 1380-1385, 2005.
M. Filipovic, Z. Kamberovic, and M. Korac, “Solidification of high chromium white cast iron alloyed with vanadium,” Mater. Trans., vol. 52, no. 3, pp. 386-390, 2011.
X. H. Tang, R. Chung, D. Y. Li, B. Hinckley, and K. Dolman, “Variations in microstructure of high chromium cast irons and resultant changes in resistance to wear, corrosion and corrosive wear,” Wear, vol. 267, no. 1-4, pp. 116-121, 2009.
Z. Jiyang, “Colour metallography of cast iron,” China foundry, vol. 6, no. 1, pp. 57-69, 2009.
A. B. Jacuinde and W. M. Rainforth, “The wear behaviour of high-chromium white cast irons as a function of silicon and Mischmetal content,” Wear, vol. 250, no. 1-12, pp. 449-461, 2001.
Y. Matsubara, K. Ogi, and K. Matsuda, “Eutectic Solidification of High-Chromium Cast Iron--Eutectic Structures and Their Quantitative Analysis,” Am. Foundrymen’s Soc. Trans., vol. 89, pp. 183-196, 1981.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).