DOI : https://doi.org/10.18517/ijaseit.6.6.953

Reason Maintenance in Product Modelling via Open Source CAD System

Z. Ibrahim (1), S. B. Mohamed (2), M. Minhat (3), A. S. Mohamed (4), M. R. Musanih (5), Z. Abd Rahman (6)
(1) Faculty of Innovative Design and Technology, Universiti Sultan Zainal Abidin, 21300 Terengganu, Malaysia
(2) East Coast Environmental Research Institute, Universiti Sultan Zainal Abidin, 21300 Terengganu, Malaysia
(3) Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, 76100, Melaka, Malaysia
(4) Faculty of Innovative Design and Technology, Universiti Sultan Zainal Abidin, 21300 Terengganu, Malaysia
(5) Faculty of Innovative Design and Technology, Universiti Sultan Zainal Abidin, 21300 Terengganu, Malaysia
(6) Faculty of Innovative Design and Technology, Universiti Sultan Zainal Abidin, 21300 Terengganu, Malaysia
Fulltext View | Download
How to cite (IJASEIT) :
Ibrahim, Z., et al. “Reason Maintenance in Product Modelling via Open Source CAD System”. International Journal on Advanced Science, Engineering and Information Technology, vol. 6, no. 6, Dec. 2016, pp. 990-6, doi:10.18517/ijaseit.6.6.953.
Citation Format :
The present and future challenges of a new product design, forecasting and risk management launch strategy for a new product modelling decision process. This paper intends to propose and to look towards the development of a low-cost integrated CAD-CAPP-CAD/CAM product modelling system for the design and manufacture of a proposed product. It is a mapping between several design phases like functional design, technical design and physical design. The modelling data generation process begins with the drafting of a product to be maintained using the drafting software package. From the CAD drawing, the data are transferred to be used as the product models and a CAPP software package will then prepare the operational parameters for the manufacturing of the product. These process data are relayed to a CAM software package, which will then generate the automating information-processing functions. The final stage of the function is to support design and manufacturing operations that may have reaped many benefits in terms of its initial equipment and software costs.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).