Designing Expert System for Centrifugal using Vibration Signal and Bayesian Networks
How to cite (IJASEIT) :
Y. Fu, B. J. Gu, J. Wang, J. Gao, G. M. Ganjyal, and M. P. Wolcott, “Novel micronized woody biomass process for production of cost-effective clean fermentable sugars,” Bioresour. Technol., vol. 260, pp. 311-320, Jul. 2018, doi: 10.1016/j.biortech.2018.03.096.
I. Prasertsung, K. Aroonraj, K. Kamwilaisak, N. Saito, and S. Damrongsakkul, “Production of reducing sugar from cassava starch waste (CSW) using solution plasma process (SPP),” Carbohydr. Polym., vol. 205, pp. 472-479, Feb. 2019, doi: 10.1016/j.carbpol.2018.10.090.
J. Chen, X. Cai, E. Lale, J. Yang, and G. Cusatis, “Centrifuge modeling testing and multiscale analysis of cemented sand and gravel (CSG) dams,” Constr. Build. Mater., vol. 223, pp. 605-615, Oct. 2019, doi: 10.1016/j.conbuildmat.2019.06.218.
G. Chen, M. Liu, and J. Chen, “Frequency-temporal-logic-based bearing fault diagnosis and fault interpretation using Bayesian optimization with Bayesian neural networks,” Mech. Syst. Signal Process., vol. 145, p. 106951, Nov. 2020, doi: 10.1016/j.ymssp.2020.106951.
C. Zhou et al., “Vibration singularity analysis for milling tool condition monitoring,” Int. J. Mech. Sci., vol. 166, p. 105254, Jan. 2020, doi: 10.1016/j.ijmecsci.2019.105254.
Y. Zhao, J. Pan, Z. Huang, Y. Miao, J. Jiang, and Z. Wang, “Analysis of vibration monitoring data of an onshore wind turbine under different operational conditions,” Eng. Struct., vol. 205, p. 110071, Feb. 2020, doi: 10.1016/j.engstruct.2019.110071.
D. Romahadi, A. A. Luthfie, and L. B. Desti Dorion, “Detecting classifier-coal mill damage using a signal vibration analysis,” SINERGI, vol. 23, no. 3, p. 175, Sep. 2019, doi: 10.22441/sinergi.2019.3.001.
D. Romahadi, H. Xiong, and H. Pranoto, “Intelligent system for gearbox fault detection & diagnosis based on vibration analysis using Bayesian Networks,” in IOP Conference Series: Materials Science and Engineering, 2019, vol. 694, doi: 10.1088/1757-899X/694/1/012001.
J. Jiang, H. Yang, G. Chen, and K. Wang, “Numerical and experimental analysis on the vibration and radiated noise of the cylinder washing machine,” Appl. Acoust., p. 107747, Nov. 2020, doi: 10.1016/j.apacoust.2020.107747.
T. Wang, Q. Han, F. Chu, and Z. Feng, “Vibration based condition monitoring and fault diagnosis of wind turbine planetary gearbox: A review,” Mech. Syst. Signal Process, vol. 126. Academic Press, pp. 662-685, Jul. 01, 2019, doi: 10.1016/j.ymssp.2019.02.051.
L. Tian, T. Ye, and G. Jin, “Vibration analysis of combined conical-cylindrical shells based on the dynamic stiffness method,” Thin-Walled Struct., p. 107260, Nov. 2020, doi: 10.1016/j.tws.2020.107260.
X. Lu et al., “Prediction and analysis of cold rolling mill vibration based on a data-driven method,” Appl. Soft Comput. J., vol. 96, p. 106706, Nov. 2020, doi: 10.1016/j.asoc.2020.106706.
M. Y. Asr, M. M. Ettefagh, R. Hassannejad, and S. N. Razavi, “Diagnosis of combined faults in Rotary Machinery by Non-Naive Bayesian approach,” Mech. Syst. Signal Process., vol. 85, pp. 56-70, Feb. 2017, doi: 10.1016/j.ymssp.2016.08.005.
J. Lee, F. Wu, W. Zhao, M. Ghaffari, L. Liao, and D. Siegel, “Prognostics and health management design for rotary machinery systems - Reviews, methodology and applications,” Mech. Syst. Signal Process., vol. 42, no. 1-2, pp. 314-334, Jan. 2014, doi: 10.1016/j.ymssp.2013.06.004.
A. W. Biantoro, H. Maryanto, A. K. Hidayanto, and A. Hamid, “The investigation of end mill feeds on CNC router machine using vibration method,” SINERGI, vol. 24, no. 2, p. 117, Apr. 2020, doi: 10.22441/sinergi.2020.2.005.
M. Hu et al., “A machine learning bayesian network for refrigerant charge faults of variable refrigerant flow air conditioning system,” Energy Build., vol. 158, pp. 668-676, Jan. 2018, doi: 10.1016/j.enbuild.2017.10.012.
S. Kabir and Y. Papadopoulos, “Applications of bayesian networks and petri nets in safety, reliability, and risk assessments: A review,” Safety Science, vol. 115. Elsevier B.V., pp. 154-175, Jun. 01, 2019, doi: 10.1016/j.ssci.2019.02.009.
T. Huang and K. U. Schrí¶der, “Bayesian probabilistic damage characterization based on a perturbation model using responses at vibration nodes,” Mech. Syst. Signal Process., vol. 139, p. 106444, May 2020, doi: 10.1016/j.ymssp.2019.106444.
A. R. Sahu and S. K. Palei, “Real-time fault diagnosis of HEMM using Bayesian Network: A case study on drag system of dragline,” Eng. Fail. Anal., vol. 118, p. 104917, Dec. 2020, doi: 10.1016/j.engfailanal.2020.104917.
G. Sharma and R. N. Rai, “Modeling and analysis of factors affecting repair effectiveness of repairable systems using Bayesian network,” Appl. Soft Comput. J., vol. 92, p. 106261, Jul. 2020, doi: 10.1016/j.asoc.2020.106261.
B. Chen, L. Xie, Y. Li, and B. Gao, “Acoustical damage detection of wind turbine yaw system using Bayesian network,” Renew. Energy, vol. 160, pp. 1364-1372, Nov. 2020, doi: 10.1016/j.renene.2020.07.062.
T. Adedipe, M. Shafiee, and E. Zio, “Bayesian Network Modelling for the Wind Energy Industry: An Overview,” Reliability Engineering and System Safety, vol. 202. Elsevier Ltd, p. 107053, Oct. 01, 2020, doi: 10.1016/j.ress.2020.107053.
D. Lee and D. Choi, “Analysis of the reliability of a starter-generator using a dynamic Bayesian network,” Reliab. Eng. Syst. Saf., vol. 195, p. 106628, Mar. 2020, doi: 10.1016/j.ress.2019.106628.
B. R. Cobb and L. Li, “Bayesian network model for quality control with categorical attribute data,” Appl. Soft Comput., vol. 84, p. 105746, Nov. 2019, doi: 10.1016/j.asoc.2019.105746.
J. Pearl, Bayesian networks: A model of self-activated: memory for evidential reasoning. Los Angeles: UCLA, 1985.
J. Pearl, “Fusion, propagation, and structuring in belief networks,” Artif. Intell., vol. 29, no. 3, pp. 241-288, 1986, doi: 10.1016/0004-3702(86)90072-X.
D. Lee and R. Pan, “A nonparametric Bayesian network approach to assessing system reliability at early design stages,” Reliab. Eng. Syst. Saf., vol. 171, pp. 57-66, Mar. 2018, doi: 10.1016/j.ress.2017.11.009.
X. Li, Y. Yang, L. Li, G. Zhao, and N. He, “Uncertainty quantification in machining deformation based on Bayesian network,” Reliab. Eng. Syst. Saf., vol. 203, p. 107113, Nov. 2020, doi: 10.1016/j.ress.2020.107113.
W. Huang, Y. Zhang, X. Kou, D. Yin, R. Mi, and L. Li, “Railway dangerous goods transportation system risk analysis: An Interpretive Structural Modeling and Bayesian Network combining approach,” Reliab. Eng. Syst. Saf., vol. 204, p. 107220, Dec. 2020, doi: 10.1016/j.ress.2020.107220.
S. Fan, J. Zhang, E. Blanco-Davis, Z. Yang, and X. Yan, “Maritime accident prevention strategy formulation from a human factor perspective using Bayesian Networks and TOPSIS,” Ocean Eng., vol. 210, p. 107544, Aug. 2020, doi: 10.1016/j.oceaneng.2020.107544.
D. A. Quintanar-Gago, P. F. Nelson, í. Díaz-Sí¡nchez, and M. S. Boldrick, “Assessment of steam turbine blade failure and damage mechanisms using a Bayesian network,” Reliab. Eng. Syst. Saf., p. 107329, Nov. 2020, doi: 10.1016/j.ress.2020.107329.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).