Estimated CO and NO2 Emissions Due to Conventional Brick Kilns in Sidrap Regency, South Sulawesi, Indonesia

Nur Anny Suryaningsih Taufieq (1), Nurlita Pertiwi (2), Putri Humaira Salsabila (3), Muhammad Firmansyah (4)
(1) Department of Education of Civil Engineering and Planning, Universitas Negeri Makassar, South Sulawesi 90224, Indonesia
(2) Department of Education of Civil Engineering and Planning, Universitas Negeri Makassar, South Sulawesi 90224, Indonesia
(3) Department of Environmental Engineering, Universitas Hasanuddin, South Sulawesi 92119, Indonesia
(4) Department of Environmental Engineering, Universitas Hasanuddin, South Sulawesi 92119, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
Taufieq, Nur Anny Suryaningsih, et al. “Estimated CO and NO2 Emissions Due to Conventional Brick Kilns in Sidrap Regency, South Sulawesi, Indonesia”. International Journal on Advanced Science, Engineering and Information Technology, vol. 14, no. 4, Aug. 2024, pp. 1271-8, doi:10.18517/ijaseit.14.4.17496.
The brick industry in Indonesia utilizes conventional burning methods that significantly impact CO and NO2 emissions, posing a severe environmental threat. The brick burning in Sidenreng Rappang Regency, South Sulawesi, uses rice husks as fuel, an agricultural waste product. Therefore, it is necessary to study the impact of the emissions produced, especially since rice husks contain much carbon. This research takes a unique approach by assessing the effects of CO and NO2 emissions from conventional brick burning in Sidenreng Rappang Regency, South Sulawesi, and examining the impact of husk volume on the combustion of the emissions produced. The research method involves the innovative technique of taking samples of ambient air around the brick kiln using an Impinger and analysis using a UV-Vis spectrophotometer. Air samples were taken at four different points, located at 2m, 4m, 6m, and 8m, from the burning location for eight consecutive days. The results showed that CO and NO2 concentrations increased significantly during the combustion process, with the highest concentrations at 2m from the combustion location. Meanwhile, the CO and NO2 concentrations increased at 8m from the combustion location. This research reveals that using rice husks as fuel is closely related to CO and NO2 emissions concentrations. Furthermore, this concentration is also influenced by environmental conditions, such as vegetation, which can reduce these emissions concentrations. The results of this research provide essential information for controlling air pollutant emissions from the brick industry, especially those that use rice husks as fuel, which can be used to develop air pollution mitigation strategies in the area.

I. Manisalidis, E. Stavropoulou, A. Stavropoulos, and E. Bezirtzoglou, “Environmental and health impacts of air pollution: a review,” Front. public Heal., vol. 8, p. 14, 2020.

S. F. Ahmed et al., “Heavy metal toxicity, sources, and remediation techniques for contaminated water and soil,” Environ. Technol. Innov., vol. 25, p. 102114, 2022.

L. Wang et al., “Remediation of mercury contaminated soil, water, and air: A review of emerging materials and innovative technologies,” Environ. Int., vol. 134, p. 105281, 2020.

W. H. Organization, “Ambient (outdoor) air quality and health. 2018,” Retrieved from World Heal. Organ. Available from http//www. who. int/mediacentre/factsheets/fs313/en/[Last accessed 2015 Nov 26], 2016.

A. A. Almetwally, M. Bin-Jumah, and A. A. Allam, “Ambient air pollution and its influence on human health and welfare: an overview,” Environ. Sci. Pollut. Res., vol. 27, pp. 24815–24830, 2020.

V. Van Tran, D. Park, and Y.-C. Lee, “Indoor air pollution, related human diseases, and recent trends in the control and improvement of indoor air quality,” Int. J. Environ. Res. Public Health, vol. 17, no. 8, p. 2927, 2020.

A. J. Cohen et al., “Estimates and 25-year trends of the global burden of disease attributable to ambient air pollution: an analysis of data from the Global Burden of Diseases Study 2015,” Lancet, vol. 389, no. 10082, pp. 1907–1918, 2017.

N. Singh, S. Singh, and R. K. Mall, “Urban ecology and human health: implications of urban heat island, air pollution and climate change nexus,” in Urban ecology, Elsevier, 2020, pp. 317–334.

J. Wang et al., “Associations between ambient air pollution and mortality from all causes, pneumonia, and congenital heart diseases among children aged under 5 years in Beijing, China: a population-based time series study,” Environ. Res., vol. 176, p. 108531, 2019.

H. Xu et al., “Environmental pollution, a hidden culprit for health issues,” Eco-Environment Heal., vol. 1, no. 1, pp. 31–45, 2022.

P. Kumar, A. B. Singh, T. Arora, S. Singh, and R. Singh, “Critical review on emerging health effects associated with the indoor air quality and its sustainable management,” Sci. Total Environ., vol. 872, p. 162163, 2023.

J. A. Flood-Garibay, A. Angulo-Molina, and M. Á. Méndez-Rojas, “Particulate matter and ultrafine particles in urban air pollution and their effect on the nervous system,” Environ. Sci. Process. Impacts, vol. 25, no. 4, pp. 704–726, 2023.

D. A. Glencross, T.-R. Ho, N. Camina, C. M. Hawrylowicz, and P. E. Pfeffer, “Air pollution and its effects on the immune system,” Free Radic. Biol. Med., vol. 151, pp. 56–68, 2020.

I. M. Dijkhoff et al., “Impact of airborne particulate matter on skin: A systematic review from epidemiology to in vitro studies,” Part. Fibre Toxicol., vol. 17, pp. 1–28, 2020.

K. R. Daellenbach et al., “Sources of particulate-matter air pollution and its oxidative potential in Europe,” Nature, vol. 587, no. 7834, pp. 414–419, 2020.

D. Shindell and C. J. Smith, “Climate and air-quality benefits of a realistic phase-out of fossil fuels,” Nature, vol. 573, no. 7774, pp. 408–411, 2019.

V. I. Fagorite, F. A. Anifowose, and V. N. Chiokwe, “Air pollution; causes, effects and remediation in Nigeria,” J. DOI, vol. 7, no. 1, pp. 1–18, 2021.

S. Fadnavis et al., “Atmospheric aerosols and trace gases,” Assess. Clim. Chang. over Indian Reg. A Rep. Minist. Earth Sci. (MoES), Gov. India, pp. 93–116, 2020.

A. Azhari, N. D. A. Halim, A. A. A. Mohtar, K. Aiyub, M. T. Latif, and M. Ketzel, “Evaluation and prediction of PM10 and PM2. 5 from road source emissions in Kuala Lumpur City Centre,” Sustainability, vol. 13, no. 10, p. 5402, 2021.

P. Padmalosan et al., “An investigation on the use of waste materials from industrial processes in clay brick production,” Mater. Today Proc., 2023.

A. Almssad, A. Almusaed, and R. Z. Homod, “Masonry in the context of sustainable buildings: A review of the brick role in architecture,” Sustainability, vol. 14, no. 22, p. 14734, 2022.

N. Fouladi, S. Hamidpour, M. A. Sedghamiz, and M. R. Rahimpour, “Application of biomass ash for brick manufacturing,” in Advances in Bioenergy and Microfluidic Applications, Elsevier, 2021, pp. 407–429.

M. Ngom, A. Thiam, A. Balhamri, V. Sambou, T. Raffak, and H. A. Refaey, “Transient study during clay bricks cooking in the traditional kiln; CFD numerical study,” Case Stud. Therm. Eng., vol. 28, p. 101672, 2021.

J. L. Amboro, N. Wahyuningsih, and D. Nurcahyanti, “Traditional ceramic kiln development model,” in Proceedings of the 2nd International Conference on Creative Media, Design & Technology (REKA2016), Penang, Malaysia, 2016, pp. 26–27.

M. A. Parvez, I. A. Rana, A. Nawaz, and H. S. H. Arshad, “The impact of brick kilns on environment and society: a bibliometric and thematic review,” Environ. Sci. Pollut. Res., vol. 30, no. 17, pp. 48628–48653, 2023.

I. B. Priyambada, F. Meilasari, H. S. Huboyo, and A. D. Setyaningsih, “Preliminary study on biomass burning emission characteristics from brick industry area (Case Study: Mranggen, Demak),” in IOP Conference Series: Earth and Environmental Science, IOP Publishing, 2023, p. 12024.

L. Nicolaou et al., “Brick kiln pollution and its impact on health: A systematic review and meta-analysis,” Environ. Res., p. 119220, 2024.

M. K. Saha, S. J. Ahmed, A. H. Sheikh, and M. G. Mostafa, “Impacts of Brick Kilns on Environment around Kiln areas of Bangladesh.,” Jordan J. Earth Environ. Sci., vol. 12, no. 3, 2021.

A. Abbas et al., “Assessment of long-term energy and environmental impacts of the cleaner technologies for brick production,” Energy Reports, vol. 7, pp. 7157–7169, 2021.

M. Asif, S. Saleem, A. Tariq, M. Usman, and R. A. U. Haq, “Pollutant emissions from brick kilns and their effects on climate change and agriculture,” ASEAN J. Sci. Eng., vol. 1, no. 2, pp. 135–140, 2021.

Z. Qu et al., “Sector‐based top‐down estimates of NOx, SO2, and CO emissions in East Asia,” Geophys. Res. Lett., vol. 49, no. 2, p. e2021GL096009, 2022.

T. A. Mukta, M. M. M. Hoque, M. E. Sarker, M. N. Hossain, and G. K. Biswas, “Seasonal variations of gaseous air pollutants (SO2, NO2, O3, CO) and particulates (PM2. 5, PM10) in Gazipur: an industrial city in Bangladesh,” Adv. Environ. Technol., vol. 6, no. 4, pp. 195–209, 2020.

T. de Paula Protásio, L. Bufalino, G. H. D. Tonoli, M. G. Junior, P. F. Trugilho, and L. M. Mendes, “Brazilian lignocellulosic wastes for bioenergy production: characterization and comparison with fossil fuels,” BioResources, vol. 8, no. 1, pp. 1166–1185, 2013.

B. E. Saltzman, “Colorimetric microdetermination of nitrogen dioxide in atmosphere,” Anal. Chem., vol. 26, no. 12, pp. 1949–1955, 1954.

R. B. Darlington and A. F. Hayes, Regression analysis and linear models: Concepts, applications, and implementation. Guilford Publications, 2016.

Z. Bashir, M. Amjad, S. F. Raza, S. Ahmad, M. Abdollahian, and M. Farooq, “Investigating the Impact of Shifting the Brick Kiln Industry from Conventional to Zigzag Technology for a Sustainable Environment,” Sustainability, vol. 15, no. 10, p. 8291, 2023.

E. Velasco, M. Roth, L. Norford, and L. T. Molina, “Does urban vegetation enhance carbon sequestration?,” Landsc. Urban Plan., vol. 148, pp. 99–107, 2016.

A.-A. Kafy, A. Al Rakib, M. A. Fattah, Z. A. Rahaman, and G. S. Sattar, “Impact of vegetation cover loss on surface temperature and carbon emission in a fastest-growing city, Cumilla, Bangladesh,” Build. Environ., vol. 208, p. 108573, 2022.

M. Yerizam and M. Faizal, “Composition Variation Effect of Rice Straw and Coconut Shell to Biobriquette Characteristics as Alternative Fuel,” in International Conference of Chemical Engineering on Science and Applications, 2013, pp. 253–259.

A. B. Tabinda, Z. Anjum, A. Yasar, R. Rasheed, A. Mahmood, and A. Iqbal, “Determination and dispersion of pollutants from different fuel types used in brick kilns by using Gaussian’s plume model,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 41, no. 8, pp. 1022–1028, 2019.

R. Arévalo, A. Rezeau, and C. Herce, “CFD analysis of co-firing of coke and biomass in a parallel flow regenerative lime kiln,” Waste and Biomass Valorization, vol. 13, no. 12, pp. 4925–4949, 2022.

Y. Zhang et al., “Rotary kilns coprocessing hazardous wastes,” in Low Carbon Stabilization and Solidification of Hazardous Wastes, Elsevier, 2022, pp. 259–289.

G. F. C. Lama, T. Sadeghifar, M. T. Azad, P. Sihag, and O. Kisi, “On the indirect estimation of wind wave heights over the southern coasts of Caspian Sea: A comparative analysis,” Water, vol. 14, no. 6, p. 843, 2022.

M. Gianfelice, H. Aboshosha, and T. Ghazal, “Real-time wind predictions for safe drone flights in Toronto,” Results Eng., vol. 15, p. 100534, 2022.

Y.-D. Huang, N. Xu, S.-Q. Ren, L.-B. Qian, and P.-Y. Cui, “Numerical investigation of the thermal effect on flow and dispersion of rooftop stack emissions with wind tunnel experimental validations,” Environ. Sci. Pollut. Res., vol. 28, pp. 11618–11636, 2021.

J. Yang, B. Shi, Y. Zheng, Y. Shi, and G. Xia, “Urban form and air pollution disperse: Key indexes and mitigation strategies,” Sustain. Cities Soc., vol. 57, p. 101955, 2020.

A. Hussain et al., “Brick kilns air pollution and its impact on the peshawar city,” Pollution, vol. 8, no. 4, pp. 1266–1273, 2022.

M. A. Bhat and E. O. Gaga, “Air pollutant emissions in the pristine Kashmir valley from the Brick Kilns,” in Biodiversity, Conservation and Sustainability in Asia: Volume 2: Prospects and Challenges in South and Middle Asia, Springer, 2022, pp. 959–979.

J. Figueroa et al., “Comparative Analysis of Gas Emissions from Ecokiln and Artisanal Brick Kiln during the Artisanal Firing of Bricks,” Sustainability, vol. 16, no. 3, p. 1302, 2024.

M. K. Saha, S. J. Ahmed, A. H. Sheikh, N. U. Ahsan, and M. G. Mostafa, “Impacts of brick kiln emissions on air quality around kiln areas,” Int. J. Nat. Hum. Sci., vol. 1, no. 1, pp. 60–70, 2020.

J. Ryan, M. Bussmann, and N. DeMartini, “CFD modelling of calcination in a rotary lime kiln,” Processes, vol. 10, no. 8, p. 1516, 2022.

H. R. Ahmad, Z. U. R. Farooqi, M. Sabir, and M. F. Sardar, “Brick Kilns: Types, Emissions, Environmental Impacts, and their Remedial Measures,” in Biodiversity, Conservation and Sustainability in Asia: Volume 2: Prospects and Challenges in South and Middle Asia, Springer, 2022, pp. 945–958.

Z. Getahun et al., “Towards sustainable charcoal production: Designing an economical brick kiln with enhanced emission control technology,” Heliyon, vol. 10, no. 6, 2024.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).