Synchronization of Data Transmission between Edge and Cloud Network in IoT-Based Hydroponic Systems

Eni Dwi Wardihani (1), Helmy (2), Ari Sriyanto Nugroho (3), Yusnan Badruzzaman (4), Arif Nursyahid (5), Thomas Agung Setyawan (6), Media Fitri Isma Nugraha (7), Clara Silvia Anggreini (8), Fitri Maharani (9)
(1) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(2) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(3) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(4) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(5) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(6) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(7) National Research and Innovation Agency, Jakarta, Indonesia
(8) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
(9) Department of Electrical Engineering, Politeknik Negeri Semarang, Semarang, Indonesia
Fulltext View | Download
How to cite (IJASEIT) :
[1]
E. D. Wardihani, “Synchronization of Data Transmission between Edge and Cloud Network in IoT-Based Hydroponic Systems”, Int. J. Adv. Sci. Eng. Inf. Technol., vol. 15, no. 2, pp. 601–609, Apr. 2025.
The use of Internet of Things (IoT) systems in hydroponic agriculture aims to enhance the efficiency and effectiveness of controlling plant growth parameters in real-time and automatically. However, current IoT based hydroponic systems heavily depend on internet networks for transmitting data. This reliance becomes problematic when the internet connection is unstable or interrupted, causing monitoring data only to reach edge devices and not the cloud, leading to potential data desynchronization. This study focused on developing a robust data synchronization system between edge devices and cloud computing platforms to address this challenge. The primary goal was to collect the latest data at the edge. Where sensors and local control systems operate is consistently mirrored in the cloud without any loss. The research findings demonstrate that the synchronization system effectively achieves this objective over an 8-day testing period. However, practical constraints, such as the TTGO T-Call ESP32 SIM800L device's transmission limit of 861 data points per operation, were observed. Despite this limitation, the system-maintained reliability, with an average transmission delay of 3 minutes considered acceptable within operational tolerances, ensuring uninterrupted system functionality. This synchronization capability is crucial for hydroponic agriculture, enabling seamless monitoring and control of environmental parameters critical for plant growth. By ensuring data integrity across both edge and cloud systems, growers can make informed decisions promptly, optimize resource utilization, and ultimately improve crop yields in IoT enabled hydroponic setups.

E. S. Kaseng, M. A. Syifani, and A. M. A. Mukhlis, "Development and working test of microcontroller-based automatic seedling tools for hydroponic systems," Int. J. Adv. Sci. Eng. Inf. Technol., vol. 14, no. 2, pp. 738-748, Apr. 2024, doi: 10.18517/ijaseit.14.2.19862.

N. K. Bharti et al., "Hydroponics system for soilless farming integrated with Android application by Internet of Things and MQTT broker," in Proc. IEEE Pune Sect. Int. Conf. (PuneCon), Dec. 2019, pp. 1-5, doi: 10.1109/PuneCon46936.2019.9105847.

R. S. Al-Gharibi, "IoT-based hydroponic system," in Proc. Int. Conf. Syst., Comput., Autom. Netw. (ICSCAN), Jul. 2021, pp. 1-6, doi:10.1109/icscan53069.2021.9526391.

K. Kularbphettong, U. Ampant, and N. Kongrodj, "An automated hydroponics system based on mobile application," Int. J. Inf. Educ. Technol., vol. 9, no. 8, pp. 548-552, 2019, doi:10.18178/ijiet.2019.9.8.1264.

H. Harniati, W. Trisnasari, and T. R. Saridewi, "Smart greenhouse technology for hydroponic farming: Is it viable and profitable business?," Int. J. Adv. Sci. Eng. Inf. Technol., vol. 13, no. 4, pp. 1333-1341, Aug. 2023, doi: 10.18517/ijaseit.13.4.17916.

E. Simanungkalit, M. Husna, and J. S. Tarigan, "Smart farming on IoT-based aeroponik systems," Sinkron, vol. 8, no. 1, pp. 505-511, Jan. 2023, doi: 10.33395/sinkron.v8i1.11988.

M. C. A. Prabowo, A. A. Janitra, and N. M. Wibowo, "Sistem monitoring hidroponik berbasis IoT dengan sensor suhu, pH, dan ketinggian air menggunakan ESP8266," J. Tecnoscienza, vol. 7, no. 2, pp. 312-323, Apr. 2023, doi: 10.51158/tecnoscienza.v7i2.894.

M. W. Al Azad et al., "CLEDGE: A hybrid cloud-edge computing framework over information centric networking," in Proc. IEEE 46th Conf. Local Comput. Netw. (LCN), Oct. 2021, pp. 589-596, doi:10.1109/LCN52139.2021.9525006.

Q. Qi and F. Tao, "A smart manufacturing service system based on edge computing, fog computing, and cloud computing," IEEE Access, vol. 7, pp. 86769-86777, 2019, doi: 10.1109/ACCESS.2019.2923610.

T. Wang et al., "Fog-based computing and storage offloading for data synchronization in IoT," IEEE Internet Things J., vol. 6, no. 3, pp. 4272-4282, Jun. 2019, doi: 10.1109/JIOT.2018.2875915.

F. Carpio, M. Michalke, and A. Jukan, "Engineering and experimentally benchmarking a serverless edge computing system," in Proc. IEEE Global Commun. Conf. (GLOBECOM), Dec. 2021, pp. 1-6, doi: 10.1109/globecom46510.2021.9685235.

A. M. Shanshool and N. A. F. Abbas, "A fog computing framework in IoT healthcare environment: Towards a new method based on tasks significance," Int. J. Adv. Sci. Eng. Inf. Technol., vol. 12, no. 6, pp. 2274-2281, Nov. 2022, doi: 10.18517/ijaseit.12.6.16047.

K. Geihs, H. Baraki, and A. de la Oliva, "Performance analysis of edge-fog-cloud architectures in the Internet of Things," in Proc. IEEE/ACM 13th Int. Conf. Util. Cloud Comput. (UCC), Dec. 2020, pp. 374-379, doi: 10.1109/UCC48980.2020.00059.

T. Rahman and S. K. Paul, "A review of computational tools, techniques, and methods for sustainable supply chains," in Computational Intelligence Techniques for Sustainable Supply Chain Management. Elsevier, 2024, pp. 1-26, doi: 10.1016/B978-0-443-18464-2.00008-X.

S. Singh, "Optimize cloud computations using edge computing," in Proc. Int. Conf. Big Data, IoT Data Sci. (BID), Dec. 2017, pp. 49-53, doi: 10.1109/BID.2017.8336572.

Y. Jararweh et al., "The future of mobile cloud computing: Integrating cloudlets and mobile edge computing," in Proc. 23rd Int. Conf. Telecommun. (ICT), May 2016, pp. 1-5, doi:10.1109/ICT.2016.7500486.

K. Cao, Y. Liu, G. Meng, and Q. Sun, "An overview on edge computing research," IEEE Access, vol. 8, pp. 85714-85728, 2020, doi: 10.1109/access.2020.2991734.

J. Ren et al., "Collaborative cloud and edge computing for latency minimization," IEEE Trans. Veh. Technol., vol. 68, no. 5, pp. 5031-5044, May 2019, doi: 10.1109/tvt.2019.2904244.

W. Shi, G. Pallis, and Z. Xu, "Edge computing [Scanning the issue]," Proc. IEEE, vol. 107, no. 8, pp. 1474-1481, Aug. 2019, doi:10.1109/jproc.2019.2928287.

L. U. Khan et al., "Edge-computing-enabled smart cities: A comprehensive survey," IEEE Internet Things J., vol. 7, no. 10, pp. 10200-10232, Oct. 2020, doi: 10.1109/jiot.2020.2987070.

J. Zhang et al., "Development of an edge computing-based cyber-physical machine tool," Robot. Comput.-Integr. Manuf., vol. 67, Feb. 2021, doi: 10.1016/j.rcim.2020.102042.

M. Wang and Q. Zhang, "Optimized data storage algorithm of IoT based on cloud computing in distributed system," Comput. Commun., vol. 157, pp. 124-131, May 2020, doi:10.1016/j.comcom.2020.04.023.

T. Diaby and B. B. Rad, "Cloud computing: A review of the concepts and deployment models," Int. J. Inf. Technol. Comput. Sci., vol. 9, no. 6, pp. 50-58, Jun. 2017, doi: 10.5815/ijitcs.2017.06.07.

S. Koehler et al., "Real world applications of cloud computing: Architecture, reasons for using and challenges," Asia Pac. J. Energy Environ., vol. 7, no. 2, pp. 93-102, Dec. 2020, doi:10.18034/apjee.v7i2.698.

C. T. Kamanga, E. Bugingo, S. N. Badibanga, E. M. Mukendi, and O. Habimana, "Cost-effective and low-complexity non-constrained workflow scheduling for cloud computing environment," Int. J. Adv. Sci. Eng. Inf. Technol., vol. 13, no. 1, pp. 371-379, Jan. 2023, doi:10.18517/ijaseit.13.1.17752.

A. Wittig and M. Wittig, Amazon Web Services in Action, 3rd ed. Shelter Island, NY: Manning, 2023.

D. V. Kornienko, S. V. Mishina, S. V. Shcherbatykh, and M. O. Melnikov, "Principles of securing RESTful API web services developed with python frameworks," J. Phys.: Conf. Ser., vol. 2094, no. 3, Nov. 2021, doi: 10.1088/1742-6596/2094/3/032016.

O. Zimmermann, M. Stocker, D. Lübke, U. Zdun, and C. Pautasso, Patterns for API Design: Simplifying Integration with Loosely Coupled Message Exchanges, 1st ed. Stuttgart, Germany: Addison-Wesley, 2022.

R. Koçi, X. Franch, P. Jovanovic, and A. Abelló, "Web API evolution patterns: A usage-driven approach," J. Syst. Softw., vol. 198, Apr. 2023, doi: 10.1016/j.jss.2023.111609.

G. Brito and M. T. Valente, "REST vs GraphQL: A controlled experiment," in Proc. IEEE Int. Conf. Softw. Archit. (ICSA), Mar. 2020, doi: 10.1109/ICSA47634.2020.00016.

A. A. Mustofa, Y. A. Dagnew, P. Gantela, and M. J. Idrisi, "SECHA: A smart energy-efficient and cost-effective home automation system for developing countries," J. Comput. Netw. Commun., vol. 2023, pp. 1-12, Mar. 2023, doi: 10.1155/2023/8571506.

X. Xiong, C. Wu, B. Hu, D. Pan, and F. Blaabjerg, "Transient damping method for improving the synchronization stability of virtual synchronous generators," IEEE Trans. Power Electron., vol. 36, no. 7, pp. 7820-7831, Jul. 2021, doi: 10.1109/TPEL.2020.3046462.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).