Mathematical Model of Radio Frequency Assisted Heat Pump Drying of Ganoderma Lucidum (Ganoderma Boninense)
How to cite (IJASEIT) :
Perumal K., Indigenous technology on organic cultivation of Reishi (Ganoderma lucidum), Taramani, Chennai 600 113, Chennai: Shri AMM Murugappa Chettiar Research Centre, 2009.
Chin S.K., Law C.L., Supramaniam C.V., Cheng P.G., “Thin layer drying characteristics and quality evaluation of air-dried Ganoderma Tsugae Murill”, Journal Drying Technology, Vol. 27, pp. 975-984, 2009.
Siew Kian Chin, Chung Lim Law, Poh Guat Cheng, “Effect of drying on crude Ganoderic acids and water soluble Polysaccharides content in Ganoderma lucidum”, International Journal of Pharm Science, Vol. 3, No.1, pp. 38-43, 2011.
Prasetyo D.J., Jatmiko T.H., Poeloengasih C.D., Kismurtono M., Drying characteristics and water-soluble polysaccharides evaluation of kidney shape Ganoderma lucidum drying in air circulation system, IOP Conf. Series: Earth and Environmental Science 101 (2017) 012012, 2017.
Nguyen Hay, Le Anh Duc, Pham Van Kien, “Study on designing and manufacturing a Radio frequency generator using in drying technology”, IEEE Xplore Digital library, ISBN: 978-1-5386-5125-4, DOI: 10.1109/GTSD. 2018.8595618, pp. 416-422, 2018.
Jumah R., “Modelling and simulation of continuous and intermittent Radio Frequency-Assisted fluidised bed drying of grains”, Journal of Food Bioprod Process, Vol. 83, pp. 203-210, 2005.
Ptasznik W., Zygmunt S., Kudra T., “Simulation of RF-Assisted convective drying of seed quality broad Beans”, International Journal of Drying Technology, Vol. 8, pp 977-992, 1990.
Marshall M.G., Metaxas A.C., “A Novel Radio Frequency Assisted Heat Pump Dryer”, International Journal of Dry Technology, Vol. 17, pp. 1571-1578, 1999.
Zhi Huang, BoZhang, Francesco Marra, ShaojinWang, “Computational modelling of the impact of polystyrene containers on radio frequency heating uniformity improvement for dried soybeans”, Journal of Innovative Food Science and Emerging Technologies, Vol. 33, pp. 365-380, 2016. .
Zhi Huang, Francesco Marra, Shaojin Wang, “A novel strategy for improving radio frequency heating uniformity of dry food products using computational modeling”, Journal of Innovative Food Science and Emerging Technologies, Vol. 34, pp. 100-111, 2016.
Ferruh Erdogdu, Ozan Altin, Francesco Marra, Tesfaye Faye Bedane, “A computational study to design process conditions in industrial radio-frequency tempering/thawing process”, Journal of Food Engineering, Vol. 213, pp. 99-112, 2017.
Hankun Zhu, Dong Li, Shujun Li, Shaojin Wang, “A novel method to improve heating uniformity in mid-high moisture potato starch with Radio frequency assisted treatment”, Journal of Food Engineering, Vol. 206, pp. 23-36, 2017.
Rahmi Uyara, Ferruh Erdogdub, Fabrizio Sarghini, Francesco Marrad, “Computer simulation of radio-frequency heating applied to block-shaped foods: Analysis on the role of geometrical parameters”, Journal of Food and Bio products Processing, Vol. 9, No. 8, pp. 310-319, 2016.
Samet Ozturk, Fanbin Kong, Samir Trabelsi, Rakesh K. Singh, “Dielectric properties of dried vegetable powders and their temperature proï¬le during radio frequency heating”, Journal of Food Engineering, Vol. 169, pp. 92 - 100, 2016.
Xuan Quang Nguyen, Anh Duc Le, Ngoc Phuong Nguyen, Hay Nguyen, “ Thermal diffusivity, moisture diffusivity, and color change of Codonopsis Javanica with the support of the ultrasound for drying”, Journal of Food Quality, Vol. 2019, Article ID 2623404, 13 pages, 2019.
Le Anh Duc, “Study on circulating conccurrent flow dryer for drying Papessed”, International Journal on Advanced Science, Engineering and Information Technology, Vol. 5, pp. 367-371, 2015.
Han J.W., Keum D.H., Kim W., Duc L.A., Cho S.H., Kim H., “Circulating concurrent-flow drying simulation of rapeseed”, Journal of Biosystems engineering, Vol. 35(6), 401-407, 2010.
Pham Van Kien, Le Anh Duc, Nguyen Hay, “Research of thermo - physical properties of Ganoderma lucidum”, Journal of thermal energy, Vol. 142, pp. 11-15, 2018.
Pham Van Kien, Nguyen Hay, Le Anh Duc, “Equilibrium Moisture Content of Ganoderma Lucidum”, Journal of Applied Mechanics and Materials, ISSN: 1662-7482, Vol. 889, pp. 266-274, 2019.
Lixia Houa, Bo Linga, Shaojin Wang, “Development of thermal treatment protocol for disinfesting chestnuts using Radio frequency energy”, Journal of Postharvest Biology and Technology, Vol. 98, pp. 65-71, 2016.
Samet Ozturk, Fanbin Kong, Rakesh K. Singh, Jese Daniel Kuzy ví Changying Li, “Radio frequency heating of corn flour: Heating rate and uniform”, Journal of Innovative Food Science and Engineering technology, Vol. 171, pp. 234-241, 2017.
Wang, S., Tang, J., Johnson, J.A., Cavalieri, R.P., “Heating uniformity and differential heating of insects in almonds associated with radio frequency energy”, Journal of Stored Prod. Res, Vol. 55, pp. 15-20, 2013.
Samet Ozturka, Fanbin Kong, Samir Trabelsi ví Rakesh K. Singh, “Dielectric properties of dried vegetable powders and their temperature profile during Radio frequency heating”, Journal of Food Engineering, Vol. 169, pp. 91-100, 2016.
Darvishi H, Asl AR, Asghari A, Najafi G, Gazori HA, “Mathematical Modeling, Moisture Diffusion, Energy consumption and Efficiency of Thin Layer Drying of Potato Slices”, Journal of Food Process Technology, Vol. 4, No. 3, pp. 234-241, 2013.
Ahmet Kaya, “Numerical Analysis Of A Radio Frequency Assisted Convective Drying”, International Journal of Scientific and Technology Research, Vol. 4, No. 6, pp. 234-241, 2015.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).