Cite Article

Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment

Choose citation format

BibTeX

@article{IJASEIT1055,
   author = {- Chotimah and Aditya Rianjanu and Bimo Winardianto and Misbachul Munir and Indriana Kartini and Kuwat Triyana},
   title = {Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment},
   journal = {International Journal on Advanced Science, Engineering and Information Technology},
   volume = {6},
   number = {5},
   year = {2016},
   pages = {675--681},
   keywords = {nanofiber; polyvinyl alcohol; electrical conductivity; DMSO; solvent vapour treatment},
   abstract = {The electrical conductivity of polyvinyl alcohol (PVA) electrospun nanofibers is naturally low. For an electrical device application, it requires high enough conductivity. The objective of this study is to improve the electrical conductivity of electrospun PVA nanofibers with and without poly (3,4-ethylenedioxytriophene): polystyrene sulfonate (PEDOT:PSS) by exposure polar solvent of dimethyl sulfoxide (DMSO). For this purpose, the nanofibers were deposited on a substrate with patterned electrodes. The distance between two electrodes is 2 mm. The sheet resistance of the PVA nanofibers was measured by using two-point probe connected to a source measurement unit of Keithley SMU-2400.  As a result, the conductivity of PVA electrospun nanofibers increases from 0.03 μS/cm to 1.20 μS/cm by increasing the PVA concentration from 8 to 10 wt%. More significant improvement is also achieved by mixing PVA and PEDOT:PSS to be 110 μS/cm after being exposure DMSO. This improvement has been confirmed using the scanning electron microscopy (SEM) images, where a  solvent-induced fusion occurs at the nanofiber junction points after DMSO treatment. The stability of electrical conductivity, however, of electrospun PVA nanofibers is better than that of electrospun PVA/PEDOT:PSS nanofibers after exposure DMSO},
   issn = {2088-5334},
   publisher = {INSIGHT - Indonesian Society for Knowledge and Human Development},
   url = {http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=1055},
   doi = {10.18517/ijaseit.6.5.1055}
}

EndNote

%A Chotimah, -
%A Rianjanu, Aditya
%A Winardianto, Bimo
%A Munir, Misbachul
%A Kartini, Indriana
%A Triyana, Kuwat
%D 2016
%T Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment
%B 2016
%9 nanofiber; polyvinyl alcohol; electrical conductivity; DMSO; solvent vapour treatment
%! Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment
%K nanofiber; polyvinyl alcohol; electrical conductivity; DMSO; solvent vapour treatment
%X The electrical conductivity of polyvinyl alcohol (PVA) electrospun nanofibers is naturally low. For an electrical device application, it requires high enough conductivity. The objective of this study is to improve the electrical conductivity of electrospun PVA nanofibers with and without poly (3,4-ethylenedioxytriophene): polystyrene sulfonate (PEDOT:PSS) by exposure polar solvent of dimethyl sulfoxide (DMSO). For this purpose, the nanofibers were deposited on a substrate with patterned electrodes. The distance between two electrodes is 2 mm. The sheet resistance of the PVA nanofibers was measured by using two-point probe connected to a source measurement unit of Keithley SMU-2400.  As a result, the conductivity of PVA electrospun nanofibers increases from 0.03 μS/cm to 1.20 μS/cm by increasing the PVA concentration from 8 to 10 wt%. More significant improvement is also achieved by mixing PVA and PEDOT:PSS to be 110 μS/cm after being exposure DMSO. This improvement has been confirmed using the scanning electron microscopy (SEM) images, where a  solvent-induced fusion occurs at the nanofiber junction points after DMSO treatment. The stability of electrical conductivity, however, of electrospun PVA nanofibers is better than that of electrospun PVA/PEDOT:PSS nanofibers after exposure DMSO
%U http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=1055
%R doi:10.18517/ijaseit.6.5.1055
%J International Journal on Advanced Science, Engineering and Information Technology
%V 6
%N 5
%@ 2088-5334

IEEE

- Chotimah,Aditya Rianjanu,Bimo Winardianto,Misbachul Munir,Indriana Kartini and Kuwat Triyana,"Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment," International Journal on Advanced Science, Engineering and Information Technology, vol. 6, no. 5, pp. 675-681, 2016. [Online]. Available: http://dx.doi.org/10.18517/ijaseit.6.5.1055.

RefMan/ProCite (RIS)

TY  - JOUR
AU  - Chotimah, -
AU  - Rianjanu, Aditya
AU  - Winardianto, Bimo
AU  - Munir, Misbachul
AU  - Kartini, Indriana
AU  - Triyana, Kuwat
PY  - 2016
TI  - Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment
JF  - International Journal on Advanced Science, Engineering and Information Technology; Vol. 6 (2016) No. 5
Y2  - 2016
SP  - 675
EP  - 681
SN  - 2088-5334
PB  - INSIGHT - Indonesian Society for Knowledge and Human Development
KW  - nanofiber; polyvinyl alcohol; electrical conductivity; DMSO; solvent vapour treatment
N2  - The electrical conductivity of polyvinyl alcohol (PVA) electrospun nanofibers is naturally low. For an electrical device application, it requires high enough conductivity. The objective of this study is to improve the electrical conductivity of electrospun PVA nanofibers with and without poly (3,4-ethylenedioxytriophene): polystyrene sulfonate (PEDOT:PSS) by exposure polar solvent of dimethyl sulfoxide (DMSO). For this purpose, the nanofibers were deposited on a substrate with patterned electrodes. The distance between two electrodes is 2 mm. The sheet resistance of the PVA nanofibers was measured by using two-point probe connected to a source measurement unit of Keithley SMU-2400.  As a result, the conductivity of PVA electrospun nanofibers increases from 0.03 μS/cm to 1.20 μS/cm by increasing the PVA concentration from 8 to 10 wt%. More significant improvement is also achieved by mixing PVA and PEDOT:PSS to be 110 μS/cm after being exposure DMSO. This improvement has been confirmed using the scanning electron microscopy (SEM) images, where a  solvent-induced fusion occurs at the nanofiber junction points after DMSO treatment. The stability of electrical conductivity, however, of electrospun PVA nanofibers is better than that of electrospun PVA/PEDOT:PSS nanofibers after exposure DMSO
UR  - http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=1055
DO  - 10.18517/ijaseit.6.5.1055

RefWorks

RT Journal Article
ID 1055
A1 Chotimah, -
A1 Rianjanu, Aditya
A1 Winardianto, Bimo
A1 Munir, Misbachul
A1 Kartini, Indriana
A1 Triyana, Kuwat
T1 Electrical Conductivity Improvement of Polyvinyl Alcohol Nanofiber by Solvent Vapour Treatment
JF International Journal on Advanced Science, Engineering and Information Technology
VO 6
IS 5
YR 2016
SP 675
OP 681
SN 2088-5334
PB INSIGHT - Indonesian Society for Knowledge and Human Development
K1 nanofiber; polyvinyl alcohol; electrical conductivity; DMSO; solvent vapour treatment
AB The electrical conductivity of polyvinyl alcohol (PVA) electrospun nanofibers is naturally low. For an electrical device application, it requires high enough conductivity. The objective of this study is to improve the electrical conductivity of electrospun PVA nanofibers with and without poly (3,4-ethylenedioxytriophene): polystyrene sulfonate (PEDOT:PSS) by exposure polar solvent of dimethyl sulfoxide (DMSO). For this purpose, the nanofibers were deposited on a substrate with patterned electrodes. The distance between two electrodes is 2 mm. The sheet resistance of the PVA nanofibers was measured by using two-point probe connected to a source measurement unit of Keithley SMU-2400.  As a result, the conductivity of PVA electrospun nanofibers increases from 0.03 μS/cm to 1.20 μS/cm by increasing the PVA concentration from 8 to 10 wt%. More significant improvement is also achieved by mixing PVA and PEDOT:PSS to be 110 μS/cm after being exposure DMSO. This improvement has been confirmed using the scanning electron microscopy (SEM) images, where a  solvent-induced fusion occurs at the nanofiber junction points after DMSO treatment. The stability of electrical conductivity, however, of electrospun PVA nanofibers is better than that of electrospun PVA/PEDOT:PSS nanofibers after exposure DMSO
LK http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=1055
DO  - 10.18517/ijaseit.6.5.1055