Cite Article

Transmit-Receive Subarrays for MIMO Radar Array Antenna

Choose citation format

BibTeX

@article{IJASEIT10631,
   author = {Syahfrizal Tahcfulloh},
   title = {Transmit-Receive Subarrays for MIMO Radar Array Antenna},
   journal = {International Journal on Advanced Science, Engineering and Information Technology},
   volume = {11},
   number = {1},
   year = {2021},
   pages = {12--19},
   keywords = {array antenna; coherent gain; MIMO radar; phased array; transmit-receive subarray.},
   abstract = {The phased multiple-input multiple-output (PMIMO) radar uses subarrays in transmit array that overlap one another to exploit the main advantage of the phased array (PA) radar, i.e., high directional coherent gain, and the main advantage of the MIMO radar, i.e., high waveform diversity gain. This paper has derived the radar formula that utilizes overlapping subarrays on transmit (Tx) and receive (Rx) array simultaneously called the transmit-receive subarrays of MIMO (TRSM) radar. The use of overlapping subarrays in Tx-Rx establishes the TRSM radar has high flexibility to configure the number of Tx-Rx subarrays that use the performance of all the gains simultaneously, so that produce Tx-Rx beampattern and signal-to-noise-plus-interference ratio (SINR) more than those achieved by PMIMO radars. The approach aims to overcome the beam shape loss, increase the transmit-receive gain, minimize the maximum peak sidelobe levels, narrow the half-power beamwidth, increase directivity, and increase SINR. The effectiveness of this radar's performance is compared to the PMIMO radar in various methods such as equal subarrays, unequal subarrays, and optimum partitioning, the PA, and the MIMO radar. The numerical simulation and evaluation results show that the proposed radar has several advantages such as lowest the peak sidelobe level, narrow the half-power beamwidth, and high directivity, so it is very resilient to interferences on target locations. The effect of the number of subarrays as a function of performance parameters on the Tx-Rx array that is ready to adjust to the detected target conditions is also presented.},
   issn = {2088-5334},
   publisher = {INSIGHT - Indonesian Society for Knowledge and Human Development},
   url = {http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=10631},
   doi = {10.18517/ijaseit.11.1.10631}
}

EndNote

%A Tahcfulloh, Syahfrizal
%D 2021
%T Transmit-Receive Subarrays for MIMO Radar Array Antenna
%B 2021
%9 array antenna; coherent gain; MIMO radar; phased array; transmit-receive subarray.
%! Transmit-Receive Subarrays for MIMO Radar Array Antenna
%K array antenna; coherent gain; MIMO radar; phased array; transmit-receive subarray.
%X The phased multiple-input multiple-output (PMIMO) radar uses subarrays in transmit array that overlap one another to exploit the main advantage of the phased array (PA) radar, i.e., high directional coherent gain, and the main advantage of the MIMO radar, i.e., high waveform diversity gain. This paper has derived the radar formula that utilizes overlapping subarrays on transmit (Tx) and receive (Rx) array simultaneously called the transmit-receive subarrays of MIMO (TRSM) radar. The use of overlapping subarrays in Tx-Rx establishes the TRSM radar has high flexibility to configure the number of Tx-Rx subarrays that use the performance of all the gains simultaneously, so that produce Tx-Rx beampattern and signal-to-noise-plus-interference ratio (SINR) more than those achieved by PMIMO radars. The approach aims to overcome the beam shape loss, increase the transmit-receive gain, minimize the maximum peak sidelobe levels, narrow the half-power beamwidth, increase directivity, and increase SINR. The effectiveness of this radar's performance is compared to the PMIMO radar in various methods such as equal subarrays, unequal subarrays, and optimum partitioning, the PA, and the MIMO radar. The numerical simulation and evaluation results show that the proposed radar has several advantages such as lowest the peak sidelobe level, narrow the half-power beamwidth, and high directivity, so it is very resilient to interferences on target locations. The effect of the number of subarrays as a function of performance parameters on the Tx-Rx array that is ready to adjust to the detected target conditions is also presented.
%U http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=10631
%R doi:10.18517/ijaseit.11.1.10631
%J International Journal on Advanced Science, Engineering and Information Technology
%V 11
%N 1
%@ 2088-5334

IEEE

Syahfrizal Tahcfulloh,"Transmit-Receive Subarrays for MIMO Radar Array Antenna," International Journal on Advanced Science, Engineering and Information Technology, vol. 11, no. 1, pp. 12-19, 2021. [Online]. Available: http://dx.doi.org/10.18517/ijaseit.11.1.10631.

RefMan/ProCite (RIS)

TY  - JOUR
AU  - Tahcfulloh, Syahfrizal
PY  - 2021
TI  - Transmit-Receive Subarrays for MIMO Radar Array Antenna
JF  - International Journal on Advanced Science, Engineering and Information Technology; Vol. 11 (2021) No. 1
Y2  - 2021
SP  - 12
EP  - 19
SN  - 2088-5334
PB  - INSIGHT - Indonesian Society for Knowledge and Human Development
KW  - array antenna; coherent gain; MIMO radar; phased array; transmit-receive subarray.
N2  - The phased multiple-input multiple-output (PMIMO) radar uses subarrays in transmit array that overlap one another to exploit the main advantage of the phased array (PA) radar, i.e., high directional coherent gain, and the main advantage of the MIMO radar, i.e., high waveform diversity gain. This paper has derived the radar formula that utilizes overlapping subarrays on transmit (Tx) and receive (Rx) array simultaneously called the transmit-receive subarrays of MIMO (TRSM) radar. The use of overlapping subarrays in Tx-Rx establishes the TRSM radar has high flexibility to configure the number of Tx-Rx subarrays that use the performance of all the gains simultaneously, so that produce Tx-Rx beampattern and signal-to-noise-plus-interference ratio (SINR) more than those achieved by PMIMO radars. The approach aims to overcome the beam shape loss, increase the transmit-receive gain, minimize the maximum peak sidelobe levels, narrow the half-power beamwidth, increase directivity, and increase SINR. The effectiveness of this radar's performance is compared to the PMIMO radar in various methods such as equal subarrays, unequal subarrays, and optimum partitioning, the PA, and the MIMO radar. The numerical simulation and evaluation results show that the proposed radar has several advantages such as lowest the peak sidelobe level, narrow the half-power beamwidth, and high directivity, so it is very resilient to interferences on target locations. The effect of the number of subarrays as a function of performance parameters on the Tx-Rx array that is ready to adjust to the detected target conditions is also presented.
UR  - http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=10631
DO  - 10.18517/ijaseit.11.1.10631

RefWorks

RT Journal Article
ID 10631
A1 Tahcfulloh, Syahfrizal
T1 Transmit-Receive Subarrays for MIMO Radar Array Antenna
JF International Journal on Advanced Science, Engineering and Information Technology
VO 11
IS 1
YR 2021
SP 12
OP 19
SN 2088-5334
PB INSIGHT - Indonesian Society for Knowledge and Human Development
K1 array antenna; coherent gain; MIMO radar; phased array; transmit-receive subarray.
AB The phased multiple-input multiple-output (PMIMO) radar uses subarrays in transmit array that overlap one another to exploit the main advantage of the phased array (PA) radar, i.e., high directional coherent gain, and the main advantage of the MIMO radar, i.e., high waveform diversity gain. This paper has derived the radar formula that utilizes overlapping subarrays on transmit (Tx) and receive (Rx) array simultaneously called the transmit-receive subarrays of MIMO (TRSM) radar. The use of overlapping subarrays in Tx-Rx establishes the TRSM radar has high flexibility to configure the number of Tx-Rx subarrays that use the performance of all the gains simultaneously, so that produce Tx-Rx beampattern and signal-to-noise-plus-interference ratio (SINR) more than those achieved by PMIMO radars. The approach aims to overcome the beam shape loss, increase the transmit-receive gain, minimize the maximum peak sidelobe levels, narrow the half-power beamwidth, increase directivity, and increase SINR. The effectiveness of this radar's performance is compared to the PMIMO radar in various methods such as equal subarrays, unequal subarrays, and optimum partitioning, the PA, and the MIMO radar. The numerical simulation and evaluation results show that the proposed radar has several advantages such as lowest the peak sidelobe level, narrow the half-power beamwidth, and high directivity, so it is very resilient to interferences on target locations. The effect of the number of subarrays as a function of performance parameters on the Tx-Rx array that is ready to adjust to the detected target conditions is also presented.
LK http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=10631
DO  - 10.18517/ijaseit.11.1.10631