Cite Article

Tire Pressure Monitoring System Using an Android Application

Choose citation format

BibTeX

@article{IJASEIT6359,
   author = {Carlos Robles Algarín and Jullbreider Pinto and Edgar Giraldo},
   title = {Tire Pressure Monitoring System Using an Android Application},
   journal = {International Journal on Advanced Science, Engineering and Information Technology},
   volume = {10},
   number = {5},
   year = {2020},
   pages = {1867--1873},
   keywords = {tire pressure monitoring system; transceivers NRF24L01; HC-05 bluetooth module; arduino nano; android application.},
   abstract = {

Driving a vehicle with inadequate tire pressure can generate more ground friction, causing an increase in fuel consumption and, therefore in CO2 emissions. Another consequence is uneven tread wear, affecting braking distance and vehicle control. This paper presents the implementation of a Tire-Pressure Monitoring System (TPMS), which is a system that alerts the driver of a vehicle about a tire pressure change. For this, four prototypes were designed to monitor and transmit the tire pressure and temperature of a vehicle. For the transmitter circuits design, ATmega328 microcontrollers, NRF24L01 transceiver modules, Honeywell NBP series pressure sensors and LM35 temperature sensors were used. In addition, a receiver that incorporates an NRF24L01 module to receive the signals coming from the transmitters was developed. The received data are sent via Bluetooth, with the HC-05 module, to an Android application developed in App Inventor, which is an open-source web application. To install the circuits on the tires, compact cases were designed in Solidwork, which were printed using the Prusa i3 3D printer. The results obtained demonstrate the effectiveness of the monitoring system and the accuracy of the measured data, as well as the relevance of the Android application to alert the driver in a simple way about any pressure change in the tires. These results suggest the possibility of using the prototype developed in realistic scenarios to monitor tire pressure in vehicles without this technology.

},    issn = {2088-5334},    publisher = {INSIGHT - Indonesian Society for Knowledge and Human Development},    url = {http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=6359},    doi = {10.18517/ijaseit.10.5.6359} }

EndNote

%A Robles Algarín, Carlos
%A Pinto, Jullbreider
%A Giraldo, Edgar
%D 2020
%T Tire Pressure Monitoring System Using an Android Application
%B 2020
%9 tire pressure monitoring system; transceivers NRF24L01; HC-05 bluetooth module; arduino nano; android application.
%! Tire Pressure Monitoring System Using an Android Application
%K tire pressure monitoring system; transceivers NRF24L01; HC-05 bluetooth module; arduino nano; android application.
%X 

Driving a vehicle with inadequate tire pressure can generate more ground friction, causing an increase in fuel consumption and, therefore in CO2 emissions. Another consequence is uneven tread wear, affecting braking distance and vehicle control. This paper presents the implementation of a Tire-Pressure Monitoring System (TPMS), which is a system that alerts the driver of a vehicle about a tire pressure change. For this, four prototypes were designed to monitor and transmit the tire pressure and temperature of a vehicle. For the transmitter circuits design, ATmega328 microcontrollers, NRF24L01 transceiver modules, Honeywell NBP series pressure sensors and LM35 temperature sensors were used. In addition, a receiver that incorporates an NRF24L01 module to receive the signals coming from the transmitters was developed. The received data are sent via Bluetooth, with the HC-05 module, to an Android application developed in App Inventor, which is an open-source web application. To install the circuits on the tires, compact cases were designed in Solidwork, which were printed using the Prusa i3 3D printer. The results obtained demonstrate the effectiveness of the monitoring system and the accuracy of the measured data, as well as the relevance of the Android application to alert the driver in a simple way about any pressure change in the tires. These results suggest the possibility of using the prototype developed in realistic scenarios to monitor tire pressure in vehicles without this technology.

%U http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=6359 %R doi:10.18517/ijaseit.10.5.6359 %J International Journal on Advanced Science, Engineering and Information Technology %V 10 %N 5 %@ 2088-5334

IEEE

Carlos Robles Algarín,Jullbreider Pinto and Edgar Giraldo,"Tire Pressure Monitoring System Using an Android Application," International Journal on Advanced Science, Engineering and Information Technology, vol. 10, no. 5, pp. 1867-1873, 2020. [Online]. Available: http://dx.doi.org/10.18517/ijaseit.10.5.6359.

RefMan/ProCite (RIS)

TY  - JOUR
AU  - Robles Algarín, Carlos
AU  - Pinto, Jullbreider
AU  - Giraldo, Edgar
PY  - 2020
TI  - Tire Pressure Monitoring System Using an Android Application
JF  - International Journal on Advanced Science, Engineering and Information Technology; Vol. 10 (2020) No. 5
Y2  - 2020
SP  - 1867
EP  - 1873
SN  - 2088-5334
PB  - INSIGHT - Indonesian Society for Knowledge and Human Development
KW  - tire pressure monitoring system; transceivers NRF24L01; HC-05 bluetooth module; arduino nano; android application.
N2  - 

Driving a vehicle with inadequate tire pressure can generate more ground friction, causing an increase in fuel consumption and, therefore in CO2 emissions. Another consequence is uneven tread wear, affecting braking distance and vehicle control. This paper presents the implementation of a Tire-Pressure Monitoring System (TPMS), which is a system that alerts the driver of a vehicle about a tire pressure change. For this, four prototypes were designed to monitor and transmit the tire pressure and temperature of a vehicle. For the transmitter circuits design, ATmega328 microcontrollers, NRF24L01 transceiver modules, Honeywell NBP series pressure sensors and LM35 temperature sensors were used. In addition, a receiver that incorporates an NRF24L01 module to receive the signals coming from the transmitters was developed. The received data are sent via Bluetooth, with the HC-05 module, to an Android application developed in App Inventor, which is an open-source web application. To install the circuits on the tires, compact cases were designed in Solidwork, which were printed using the Prusa i3 3D printer. The results obtained demonstrate the effectiveness of the monitoring system and the accuracy of the measured data, as well as the relevance of the Android application to alert the driver in a simple way about any pressure change in the tires. These results suggest the possibility of using the prototype developed in realistic scenarios to monitor tire pressure in vehicles without this technology.

UR - http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=6359 DO - 10.18517/ijaseit.10.5.6359

RefWorks

RT Journal Article
ID 6359
A1 Robles Algarín, Carlos
A1 Pinto, Jullbreider
A1 Giraldo, Edgar
T1 Tire Pressure Monitoring System Using an Android Application
JF International Journal on Advanced Science, Engineering and Information Technology
VO 10
IS 5
YR 2020
SP 1867
OP 1873
SN 2088-5334
PB INSIGHT - Indonesian Society for Knowledge and Human Development
K1 tire pressure monitoring system; transceivers NRF24L01; HC-05 bluetooth module; arduino nano; android application.
AB 

Driving a vehicle with inadequate tire pressure can generate more ground friction, causing an increase in fuel consumption and, therefore in CO2 emissions. Another consequence is uneven tread wear, affecting braking distance and vehicle control. This paper presents the implementation of a Tire-Pressure Monitoring System (TPMS), which is a system that alerts the driver of a vehicle about a tire pressure change. For this, four prototypes were designed to monitor and transmit the tire pressure and temperature of a vehicle. For the transmitter circuits design, ATmega328 microcontrollers, NRF24L01 transceiver modules, Honeywell NBP series pressure sensors and LM35 temperature sensors were used. In addition, a receiver that incorporates an NRF24L01 module to receive the signals coming from the transmitters was developed. The received data are sent via Bluetooth, with the HC-05 module, to an Android application developed in App Inventor, which is an open-source web application. To install the circuits on the tires, compact cases were designed in Solidwork, which were printed using the Prusa i3 3D printer. The results obtained demonstrate the effectiveness of the monitoring system and the accuracy of the measured data, as well as the relevance of the Android application to alert the driver in a simple way about any pressure change in the tires. These results suggest the possibility of using the prototype developed in realistic scenarios to monitor tire pressure in vehicles without this technology.

LK http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=6359 DO - 10.18517/ijaseit.10.5.6359