Cite Article

Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint

Choose citation format

BibTeX

@article{IJASEIT9877,
   author = {Restu Kartiko Widi and Emma Savitri and Arief Budhyantoro and Robert Yasaputera and Johan Gunardi},
   title = {Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint},
   journal = {International Journal on Advanced Science, Engineering and Information Technology},
   volume = {10},
   number = {6},
   year = {2020},
   pages = {2498--2503},
   keywords = {photo-catalytic; TiO2-Fe3O4-bentonite; E. Coli; S. Aureus; antimicrobial.},
   abstract = {

The TiO2-Fe3O4-bentonite was used in this study as a photocatalyst material for antimicrobial. The material was coated on a ceramic container. This study is the preliminary study on coatings formulated using TiO2-Fe3O4-bentonite to fight against microbial. This paper aims to emphasize the application of TiO2-Fe3O4-bentonite in the water purification process by adding material into the paint and coating it on ceramic containers as a reactor to help neutralize E. coli and S. Aureus. The TiO2-Fe3O4-bentonite powder was synthesized by the sol-gel method. The photocatalyst powder was exhaled on the surface of the inside painted-walls of the reactor. Some photo-catalytic parameters have been investigated, such as the photocatalyst concentrations and the initial concentration of E. coli starter, and S. Aureus starter. The result showed that the higher the concentration of the photocatalyst material, the more effective its degradation. Also, the highest death rate occurs when the initial concentration of the E. coli starter is at 107 CFU/ml. Photo-degradation in gram-negative bacteria (E. Coli) gives more promising results than the process in gram-positive bacteria (S. aureus). The characterization of the material showed that the photocatalyst material leached during the photo-degradation process. This causes the more extended the reaction takes place; there will be a decrease in bacterial photo-degradation activity. Also, the use of solar light in the photo-catalysis process is more effective than UV light.

},    issn = {2088-5334},    publisher = {INSIGHT - Indonesian Society for Knowledge and Human Development},    url = {http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=9877},    doi = {10.18517/ijaseit.10.6.9877} }

EndNote

%A Widi, Restu Kartiko
%A Savitri, Emma
%A Budhyantoro, Arief
%A Yasaputera, Robert
%A Gunardi, Johan
%D 2020
%T Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint
%B 2020
%9 photo-catalytic; TiO2-Fe3O4-bentonite; E. Coli; S. Aureus; antimicrobial.
%! Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint
%K photo-catalytic; TiO2-Fe3O4-bentonite; E. Coli; S. Aureus; antimicrobial.
%X 

The TiO2-Fe3O4-bentonite was used in this study as a photocatalyst material for antimicrobial. The material was coated on a ceramic container. This study is the preliminary study on coatings formulated using TiO2-Fe3O4-bentonite to fight against microbial. This paper aims to emphasize the application of TiO2-Fe3O4-bentonite in the water purification process by adding material into the paint and coating it on ceramic containers as a reactor to help neutralize E. coli and S. Aureus. The TiO2-Fe3O4-bentonite powder was synthesized by the sol-gel method. The photocatalyst powder was exhaled on the surface of the inside painted-walls of the reactor. Some photo-catalytic parameters have been investigated, such as the photocatalyst concentrations and the initial concentration of E. coli starter, and S. Aureus starter. The result showed that the higher the concentration of the photocatalyst material, the more effective its degradation. Also, the highest death rate occurs when the initial concentration of the E. coli starter is at 107 CFU/ml. Photo-degradation in gram-negative bacteria (E. Coli) gives more promising results than the process in gram-positive bacteria (S. aureus). The characterization of the material showed that the photocatalyst material leached during the photo-degradation process. This causes the more extended the reaction takes place; there will be a decrease in bacterial photo-degradation activity. Also, the use of solar light in the photo-catalysis process is more effective than UV light.

%U http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=9877 %R doi:10.18517/ijaseit.10.6.9877 %J International Journal on Advanced Science, Engineering and Information Technology %V 10 %N 6 %@ 2088-5334

IEEE

Restu Kartiko Widi,Emma Savitri,Arief Budhyantoro,Robert Yasaputera and Johan Gunardi,"Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint," International Journal on Advanced Science, Engineering and Information Technology, vol. 10, no. 6, pp. 2498-2503, 2020. [Online]. Available: http://dx.doi.org/10.18517/ijaseit.10.6.9877.

RefMan/ProCite (RIS)

TY  - JOUR
AU  - Widi, Restu Kartiko
AU  - Savitri, Emma
AU  - Budhyantoro, Arief
AU  - Yasaputera, Robert
AU  - Gunardi, Johan
PY  - 2020
TI  - Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint
JF  - International Journal on Advanced Science, Engineering and Information Technology; Vol. 10 (2020) No. 6
Y2  - 2020
SP  - 2498
EP  - 2503
SN  - 2088-5334
PB  - INSIGHT - Indonesian Society for Knowledge and Human Development
KW  - photo-catalytic; TiO2-Fe3O4-bentonite; E. Coli; S. Aureus; antimicrobial.
N2  - 

The TiO2-Fe3O4-bentonite was used in this study as a photocatalyst material for antimicrobial. The material was coated on a ceramic container. This study is the preliminary study on coatings formulated using TiO2-Fe3O4-bentonite to fight against microbial. This paper aims to emphasize the application of TiO2-Fe3O4-bentonite in the water purification process by adding material into the paint and coating it on ceramic containers as a reactor to help neutralize E. coli and S. Aureus. The TiO2-Fe3O4-bentonite powder was synthesized by the sol-gel method. The photocatalyst powder was exhaled on the surface of the inside painted-walls of the reactor. Some photo-catalytic parameters have been investigated, such as the photocatalyst concentrations and the initial concentration of E. coli starter, and S. Aureus starter. The result showed that the higher the concentration of the photocatalyst material, the more effective its degradation. Also, the highest death rate occurs when the initial concentration of the E. coli starter is at 107 CFU/ml. Photo-degradation in gram-negative bacteria (E. Coli) gives more promising results than the process in gram-positive bacteria (S. aureus). The characterization of the material showed that the photocatalyst material leached during the photo-degradation process. This causes the more extended the reaction takes place; there will be a decrease in bacterial photo-degradation activity. Also, the use of solar light in the photo-catalysis process is more effective than UV light.

UR - http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=9877 DO - 10.18517/ijaseit.10.6.9877

RefWorks

RT Journal Article
ID 9877
A1 Widi, Restu Kartiko
A1 Savitri, Emma
A1 Budhyantoro, Arief
A1 Yasaputera, Robert
A1 Gunardi, Johan
T1 Application of Photocatalyst Material Bentonite Ti Based as Antimicrobial Paint
JF International Journal on Advanced Science, Engineering and Information Technology
VO 10
IS 6
YR 2020
SP 2498
OP 2503
SN 2088-5334
PB INSIGHT - Indonesian Society for Knowledge and Human Development
K1 photo-catalytic; TiO2-Fe3O4-bentonite; E. Coli; S. Aureus; antimicrobial.
AB 

The TiO2-Fe3O4-bentonite was used in this study as a photocatalyst material for antimicrobial. The material was coated on a ceramic container. This study is the preliminary study on coatings formulated using TiO2-Fe3O4-bentonite to fight against microbial. This paper aims to emphasize the application of TiO2-Fe3O4-bentonite in the water purification process by adding material into the paint and coating it on ceramic containers as a reactor to help neutralize E. coli and S. Aureus. The TiO2-Fe3O4-bentonite powder was synthesized by the sol-gel method. The photocatalyst powder was exhaled on the surface of the inside painted-walls of the reactor. Some photo-catalytic parameters have been investigated, such as the photocatalyst concentrations and the initial concentration of E. coli starter, and S. Aureus starter. The result showed that the higher the concentration of the photocatalyst material, the more effective its degradation. Also, the highest death rate occurs when the initial concentration of the E. coli starter is at 107 CFU/ml. Photo-degradation in gram-negative bacteria (E. Coli) gives more promising results than the process in gram-positive bacteria (S. aureus). The characterization of the material showed that the photocatalyst material leached during the photo-degradation process. This causes the more extended the reaction takes place; there will be a decrease in bacterial photo-degradation activity. Also, the use of solar light in the photo-catalysis process is more effective than UV light.

LK http://ijaseit.insightsociety.org/index.php?option=com_content&view=article&id=9&Itemid=1&article_id=9877 DO - 10.18517/ijaseit.10.6.9877